Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm height 7 mm weight 47 g (actual measurement)
SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm height 7 mm weight 47 g (actual measurement)
PSE standard product ACROLINK power plug Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
The price has been reduced! 2023/10/7 sales price 20,000 yen This is a self-made MC boost transformer. According to the specifications, the boost ratio seems to be 1:10. Use high output cartridges such as DL-103! (FUJISAWA Yukishi)
Maintenance information: 2023.10.7 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W110 x H45 x D145 mm (actual measurement)
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/11 sales price 3,000 yen ※It is cheap because it is in poor condition! The self-made enclosure 2-way type 175DLH and D130 were mounted, but the hole position on the screw receiving side did not match and they were fixed by sealing. Processing is required for actual installation. The exterior has a feeling of use over time, such as dullness, scratches, peeling veneer, etc. (ASAINE Tomonori)
Accessories: saran net
Main specifications: size 450 x 845 x 450 mm weight 17.7 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 12,800 yen. Ground wire 4.0m American steel vintage ground cable. Sturdy single wire. Depending on the idea, it can also be used for wiring other than ground wires. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Center speaker stand from unknown manufacturer. It is a type that is easy to handle, with wooden casters. There are threads on the exterior. (MIURA Kimiya)
Accessories: none
Main specifications: W570 ✕ H225 ✕ D440mm 4kg
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. There is dull writing around the plug, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation requires ingenuity (the cable length at the tip of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, and input the terminal side with the core box Please connect to the terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
PSE certified product. The successor model to the 4-port 3-pin power strip with a cable length of 1.0 m, and a heavy steel tap. Sound resolution has been further improved by further improving shield performance compared to the previous model (Fujisawa Yukishi)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: No accessories
Main specifications: W120 x H120 x D50 mm 1.65 kg (not including cable part)
Unspecified marble board. The top plate and 5 sides have a mirror finish. Use it for amplifiers, CD players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W300 x H30 x D450 mm 10.6 kg (actual measurement)
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
*1 bottle only Speaker stand with unknown details such as manufacturer name and model. There are appearance, abrasions, and dullness (Hitoshi Kobayashi)
Accessories: none
Main specifications: W280 × H270 × D330 mm 4.8 kg (actual measurement)
Audio-Technica model number unknown gold-plated conversion jack. The female side is well made, and the manufacturer's logo is also engraved. There are dull stains all over (Murakoshi Yoichi)
Accessories: none
The price has been reduced. 2018/3/3 selling price 10,000 yen Technics ring for fixing horns. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: Inner circumference diameter 95mm (actual measurement)
Empire's unknown replacement needle. Very similar for 909E/X, but details are unknown. Since there is no main unit, operation has not been confirmed. There is a feeling of use (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: none
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi)
Accessories: screws
The price has been reduced. 2020/4/17 Selling price 5,000 yen Unspecified wooden front baffle. If you are a self-made group, come on. There are scratches and stains scattered, uneven painting, corner chips, etc. (Takasaki Atsushi)
Accessories: none
Main specifications: opening diameter 280 mm bass reflex opening W292 × H80 mm W400 × H610 × D20 mm 1.8 kg/sheet
This is a set of 4 round insulators with unknown details. There is a dent in the center of each. It is sturdy with a sense of weight. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size 39φ×H17mm weight 140g
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/15 sales price 59,800 yen ※The exterior is in poor condition, so it's cheap. Equipped with a unit that uses wood fiber cone paper. The polished front baffle and rounded edges not only look great, but also reduce distortion during playback. The tone is detailed and transparent like DALI, and you can feel the expanse of space, and it goes particularly well with classical music. You can see the exterior, leg oxidation, rust, scratches on the top plate, torn corners on the saran net, etc. (Takasaki Atsushi)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: saran net
Main specifications: Unit configuration/mid and low range 180 mm cones x 2, treble range 25 mm soft dome frequency characteristics 40 Hz to 26.5 kHz crossover 2.4 kHz 90 dB 6 Ω recommended amplifier output 40 to 150 W W257 x H994 x D320 mm (including base) 14.9 kg/book
Speaker cable with 2.3 m pair ends, unprocessed, 2-split band with balance & time correct construction. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/9 sales price 6,500 yen MM type cartridge developed by inheriting the technology of the X-1 series. It inherits technology from the X-1 series, such as beryllium cantilevers, laminated cores, and samarium-cobalt magnets. Furthermore, the degree of perfection has been enhanced through theoretical analysis and strict hearings using computers. The exterior has a feeling of use such as dullness, scratches, and peeling of the front plate. There is a slight bend in the stylus (Jun Tamai)
Maintenance information: 2024.4.9 sound output confirmed
Accessories: none
Main specifications: mm type cartridge, suitable needle pressure 1.5 g to 2.0 g, dead weight 5.5 g
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep check OK
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
※Since it is cheap, it is handed over as is, and the remote control works, but only the high-cut filter does not respond. Comes with a remote control. It is a subwoofer that condenses the know-how of YAMAHA, a prestigious audio company. Tight low frequencies support the system. The feeling of use such as scratches and dullness is noticeable (Daiki Goto)
Maintenance information: 2024.3.7 operation confirmed
Accessories: remote control
Main specifications: built-in 25cm anti-magnetic superwoofer amplifier (output 120W) playback frequency band 20 to 160 Hz YST system equipped with 2 pin terminals and speaker terminals W330 x H440 x D380 mm 22 kg
*Currently sold. Yamaha superwoofer equipped with a 20 cm x 2 double woofer. Equipped with active servo technology and a 150W high-power amplifier, it plays bass that is small yet full of volume. There is dirt, dirt and dullness on the exterior, and some floating on the bottom. Serial Z117079QS (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: No accessories
Main specifications: used unit 20 cm cone type x 2 rated output 150 W (5 ohms) playback frequency band 20 Hz to 160 Hz high cut filter 40 Hz to 140 Hz, continuously variable W235 x H602 x D463 mm 20 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 40,000 yen*Currently sold. Comes with a remote control. Subwoofer system with built-in power amplifier using Yamaha's unique YST system. The deep bass is thick and has a sense of volume, and is excellent for reproducing movies and live sound sources. It is a heavy structure using the same wood as GT racks. There is a feeling of use on the exterior due to scratches, dullness, paint peeling, etc. Serial 101034 (Tomonori Asaine)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: remote control instruction manual
Main specifications: floor-type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
Replacement needle for YAMAHA cartridge CG-8000 Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for YAMAHA cartridge CG-6800 Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: unconfirmed
Accessories: original box
Replacement needle for YAMAHA cartridge CG-6600S. Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box