※It has a cigarette smell, so it's cheap. XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). The exterior has dirt and paint bald spots (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
The price has been reduced! 2024/2/15 sales price 45,000 yen Maintained! ONKYO premain amplifier with high cost performance. A non-feedback power amplifier is used, and the power supply transformer is of high quality and carefully crafted. The power amplifier direct position allows direct input to the power amplifier via volume only. The exterior is dull. Serial 4604014114 (Yonejima Satoshi)
Maintenance information: 2024.2.15 Maintained (input selector, direct switch, etc. Switch disassemble contacts, polish contacts and apply contact cleaner. Main amplifier circuit input circuit soldering correction)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) PHONO input 1 system (MM/ MC switching) W445 x H165 x D434 mm 18.0 kg
Onyx ribbon tweeter It has a smooth tone unique to ribbons, and is compatible with European speakers that focus on spatial expression and atmosphere. It also has the advantage of not getting tired of listening, and the piano black finish looks good. The exterior is dull all over, and small scratches are conspicuous. Serial A12541/A12542 (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: Magnetic static supertweeter frequency band 8 to 45 kHz impedance 4 ohms sound pressure level 92 dB crossover 11 kHz/15 kHz 4 steps with attenuator Dimensions W120 x H128 x D130 mm weight 2 kg
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Micro stroboscope It comes with an overhang gauge, so it's convenient to have one. There are small scratches and dents on the exterior (Yonejima Satoshi)
Accessories: No accessories
The price has been drastically reduced! 2024/4/6 sales price 218,000 yen ※The exterior is in poor condition, so it's cheap. Maintained! 100V specification genuine Baes product. A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. The exterior has rust spots, paint deterioration, and unevenness on the front. Serial JBZ7419 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (TONE, MODE, INPUT, BAL etc. decomposition contact polishing grease applied. All push switch contacts are coated with abrasive grease. Mode switch, volume, balance volume contact cleaning. Electrolytic capacitor replacement. Panel lamp replacement Panel peeling correction. ※Since the panel color is burnt, there is color unevenness with the correction part. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT1245 (Fujisawa Yukishi)
Maintenance Information: 2024.4.8 Maintained (Electrolytic Capacitor Replaced. Replace the meter and display lamp. Apply heat-resistant tape Urethane sheet deterioration replacement. Clean switches and volumes. Card edge contact cleaning. Solder correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT2411 (Fujisawa Yukishi)
Maintenance information: 2024.4.8 Maintained (meter and display lamp replacement (there is slight unevenness in characters due to deterioration of the light guide plate, but this is the current situation) Electrolytic capacitor, rotary SW replacement. Apply heat-resistant tape. Solder correction. Clean card edge contacts, switches, and volumes. Possible panel peeling correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/3 sales price 218,000 yen Maintenance has been completed. It is a hidden popular model as the successor to the C26. It is an amplifier from the golden age of McKinn that is highly popular with music fans, with a sound reminiscent of a rich, thick vacuum tube sound. It makes vintage speakers sound intense. The exterior has paint floats, rust spots, etc. Serial BV2290 (Tamura Eiji)
Maintenance information: 2024.4.3 maintained (input selector, other contact cleaning. Balancer volume contact cleaning. Electrolytic capacitor replacement. RCA terminal replacement. The power supply voltage was changed to 100V compatible. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: input PHONO 1 · 2, AUX 1 · 2, TUNER, TAPE 1 · 2 W435 × H188 × D395 mm 11.8 kg
※Since it is cheap, it will be handed over as is. Ishino Lab's Master Series power amplifier designed by Mr. Hirano. A class amplifier equipped with a matching transformer. It has a compact design and seems to be easy to use. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: instruction manual, power cable
Main specifications: 1W+1W (8Ω) 4-8Ω 20-20khz W250 × H85 × D263mm weight 3.0 kg
Ishino Lab's control amplifier that uses a rectifier tube for the power supply unit. Although it is a small and long body, it is a car with excellent cost performance, such as separating the power supply part and installing an MC transformer compatible with a wide range of cartridges. The output is also equipped with RCA balance. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: instruction manual, power cable, connection cable
Main specifications: 2 phono systems, LINE1 system amplifier part: W250 x H75 x D230 mm weight 2.2 g power supply unit: W150 x H75 x D230 mm weight 2.8 kg
Maintained. Battery operated MC head amplifier. The modular type allows you to enjoy analog playback like the company's ML series. It has the sharpness and dynamic sound unique to being battery-powered, and the combination with the old SPU is particularly exquisite. There are scratches and scratches on the exterior. Serial 1232 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (there is a liquid leak mark on the battery holder. (It was cleaned and repaired because it was not available.)
Accessories: No accessories
Main specifications: 8 mV (maximum), output terminal with battery checker, 250 mV (maximum), frequency band 20 to 50,000 Hz, W220xH45xD100mm, 0.7 kg
※Since it is cheap, it will be handed over as is. Marantz 10cm full range speaker. There is no habit, and it makes a well-balanced sound from high to low frequencies. It doesn't take up much space, so you can set it up anywhere. The exterior has scratches, dirt, scratches, etc. Also, there is color peeling and partial deformation on saran. Serial MZ01748010115 (Fujisawa Yukishi)
Maintenance information: 2024.2.25 Operation confirmed
Accessories: saran net
Main specifications: 1 way, 1 speaker, bass reflex system, setting free type, rated input 35W, impedance 6Ω, playback frequency 50 Hz to 20 kHz, W230 x H150 x D150 mm
The price has been reduced! 2024/3/31 sales price 448,000 yen Maintained! It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant tonal feel is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. ※The hood is not included. Paint deterioration and rust can be seen on the exterior. Serial 8-6421 (Fujisawa Yukishi)
Maintenance information: 2024.3.31 Maintained (BIAS switching noise reduction measures → strengthened contact points for each disassembly part and cleaning and repair. Electrolytic capacitor 20 μF x 2 deterioration replacement. Replace 2 25 μF electrolytic capacitors due to deterioration. Block capacitor 60 μF deterioration replacement. BIAS/AC BAL. RECONDITIONED Vacuum tube socket and RCA jack caulking repair*Other operation checks have been performed (measured at 32 to 45 W SP: 8 Ω with rated output AC 100 to 117 V)
Accessories: No accessories
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
The price has been drastically reduced! 2024/4/14 sales price 198,000 yen This model took the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
Maintained! It is a model designed by US Marantz and manufactured in Japan. It develops an American sound with a dry air feel and strong push. The design is also a vintage control amplifier with a taste unique to the 70s. Externally, there are scratches and threads on the cabinet. *Some RCA terminals and inlets have been changed. Serial 7237 (Tamura Eiji)
Maintenance Information: 2024.4.13 Maintained (Mode selector stopper mechanism fixed. Electrolytic capacitors and film capacitors have been replaced. The speaker terminal (red and black type) has been processed and replaced. The end of RCA TAPE was replaced due to discoloration. Each input/output operation was checked.)
Accessories: power cable
Main specifications: Line input 5 systems, phono (MM), 2 systems, pre-out, 1 system, W391 x H146 x D222 mm, 7.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/8 sales price 198,000 yen Maintained! Macton tubular OTL stereo power amplifier. Eight 6RA3 triodes are used in parallel per channel to enhance load impedance adaptability, and it also features a structure with Macton's unique balanced NF applied. The sound unique to OTL is thick and has a high sense of energy, and the high driving power is also attractive. The appearance is oxidized and dull. Serial 40704 (Yonejima Satoshi)
Maintenance information: 2024.4.8 Maintained (power transformer primary side rewound repair by PSE inspection. 3 vacuum tube 6RA3 replacements Vacuum tube 6AQ8 replacement. Main volume disassembly cleaning repair. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 100V (rated output 32W, SP:16Ω), please use speakers above 16Ω)
Accessories: No accessories
Main specifications: tubular low-load OTL stereo power amplifier 30W x 30W (8Ω) vacuum tube used: 6RA3 x 10/6RA8 x 2/12AX7 W370 ✕ H160 ✕ D270 mm 12 kg
An affordable Lax interconnect cable with attention to detail, such as each core structure that makes the hot and cold of the 1.0 m RCA cable transmission line the same, and a core wire wrapped in Japanese paper. It is characterized by its moderate thickness and good S/N. (YONEJIMA Satoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: No accessories
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. There is dullness and dirt (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. Dullness is dirty (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
※Operation has been confirmed, but since it is cheap, it will be handed over as is. This is a KENWOOD KA series amplifier. It has a compact and clean design, and can be placed horizontally or vertically. The sound quality is as clean as it looks, and it is recommended for those who want to enjoy music in a small space. Serial 61100061 (Sato Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 3 input lines 12W+12W (8Ω) dimensions W171 x H67 x D207 mm weight 2 kg
The disposal price has been reduced! Member prices are not applicable. 2024/3/13 sales price 59,800 yen Maintained! Kenwood's last varicon-type analog tuner developed by utilizing the L-02T's know-how. The rich, vivid sound quality in the mid-range typical of the L series is attractive. There are some scratches on the exterior. Serial 44K10290 (Fujisawa Yukishi)
Maintenance information: 2024.3.13 maintained (replaced with a trimmer with an approximate value due to faulty front-end OSC trimmer and unavailability of the original. Therefore, tracking was adjusted with a trimmer, but it fits perfectly with the memory around 83 MHz, but the memory deviates slightly at higher or lower frequencies. Please note in advance)
Accessories: copy of instruction manual
Main specifications: Non-spectrum IF method, reception frequency 76MHz to 90MHz, antenna impedance 75Ω (unbalance), multipath output, W440 x H111 x D337 mm, 5.4 kg
The price has been reduced! 2024/4/14 sales price 99,800 yen ※It is cheap because there are tar stains. The world's first Metamaterial-equipped speaker! Commonly known as MAT, it has a unique road structure, and is said to almost completely eliminate noise on the back of the TW, and it is an area where I feel surprised by its distortion reduction effect. A loudspeaker designed based on innovative sound technology. Please experience the clear tone of VOCAL's mid to high range. The exterior is dull all over, and there is dirt on the top plate. Serial LS50217926N11N2G/LS50218095N11N2G (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: 2-way bass reflex, 5.25-inch UNI-Q driver adopted, frequency characteristics 47Hz-45kHz, 8Ω, 85dB, W200 x H302 x 280.5 mm, 7.8 kg
Light and compact, stylish headphones from JVC. The sound has excellent sound insulation and is comfortable to listen to (Tamura Eiji)
Maintenance information: 2024.3.15 sweep check OK
Accessories: case
Main specifications: dynamic type 12 to 24,000 Hz 32 ohms 103 dB 66 g
Mini plug to stereo standard plug conversion cable It is a model using OFC as a wire rod. (Eiji Tamura)
Maintenance information: 2022.1.5 continuity confirmed
Accessories: original box
※It has a cigarette smell, so it's cheap. JOB's power conditioner will be in stock for the first time in about 4 years. Genuine Zephan product. Can be used up to 800W. AC noise reduction, sound energy, wide sound field, good sound quality of each one, and improvements in speed can be expected. There are dirt and scratches on the exterior. *One side outputs 100V and the other side outputs 110V. Serial 21103915 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: No accessories
Main specifications: capacity 800 W external dimensions W150 x H55 x D 208 mm 3.22 kg
The price has been drastically reduced! 2024/4/13 sales price 348,000 yen ※ It is cheap because it is in poor condition such as deposits, scratches, tobacco smell, etc. A power amplifier that enables overwhelming spatial expression with a second-generation ultra-high speed switching power supply. First of all, I was surprised by the smooth, cored sound. The driving power is also excellent, and it has the ability to easily drive high-class speakers. The exterior is dull all over, and there are abrasions on the top plate and front (Yonejima Satoshi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: connection cord, power cable
Main specifications: 150W+150W (8Ω) input/unbalance (RCA) 1 system/balanced (XLR) 1 system SP terminal/1 system main unit W445 x H97 x D335 mm power supply unit W445 x H97 x D319 mm body 13.5 kg power supply 13.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/11 sales price 148,000 yen ※It is cheap because the condition is poor due to noticeable bumps and frayed saran nets. JBL 60th anniversary model. A tall boy who embodies a wide range of modern JBL sounds. It has a smooth, smooth tone, and is compatible with various genres without difficulty. Of course, you can also enjoy a sense of energy with a punch in the mid to low range. The exterior has blows, scratches, and fissures on Saran (Tamura Eiji)
Maintenance information: 2024.4.11 sweep test good
Accessories: saran net, spikes
Main specifications: 3 way 4 speakers 6Ω 90dB crossover frequency 2.5kHz, 8kHz W260 × H1,130 × D430 mm 35.6 kg
Every detail from exterior to interior has been maintained! The JBL Studio Monitor 4355 with dedicated channel divider 5235 is in stock for the first time in a long time! The final model of the JBL studio monitor, double woofer. The enclosure volume is the same as 4350, but since the thickness of the top plate etc. is different, the outer dimensions are one size larger, and the presence has increased even more! The front attenuator also has separate MID/TW, making it easy to control. The sense of range and overall sound connection are also excellent, and the sense of volume in the low frequencies is amazing, with only a double woofer. Serial 10136/10186 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (exterior repair/polishing/oil finish, front and rear baffle/hakama repair/paint, saran net replacement/frame repair, woofer maintenance: edge replacement, cone paper coating, mid-cone paper coating, driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter maintenance: magnetic circuit gap cleaning, sound absorbing material Reupholstery, terminal cleaning/screw replacement, network maintenance: frequency characteristic check, ATT disassembly and cleaning, terminal cleaning/screw replacement, unit detaching/diffuser repair)
Accessories: saran net, diffuser, channel divider 5235
Main specifications: used unit woofer 2235H, midbass 2202H, driver 2241, tweeter 2405H frequency characteristics 31.5 Hz to 18 kHz efficiency 96 dB impedance 290 Hz is 4 ohms, 290 Hz or more is 8 ohms, W1223 x H901 x D510 mm 120 kg
It took plenty of time and money to finish everything from overhauling each unit to reupholstering the saran net to full exterior maintenance. This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. Serial 16119, 16349 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (exterior repair/polishing/oil finish, front and rear baffle repair/painting, saran net reupholstery, frame repair, woofer maintenance: edge replacement, cone paper coating, midmaintenance: driver maintenance: magnetic circuit rust removal/in-gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter maintenance: magnetic circuit rust removal/in-gap cleaning, terminal Cleaning screw replacement, network maintenance: frequency characteristic check, ATT disassembly cleaning, switching SW contact cleaning, terminal cleaning/screw replacement, unit detachable diffuser repair)
Accessories: saran net, diffuser
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/book
The price has been drastically reduced! 2024/4/5 sales price 398,000 yen ※Saran net is out of stock. Network maintenance was applied to the tweeter, and an oil finish was applied to exterior maintenance to give it a clean refresh! This model is a rare combination with the 075. A floor-type speaker system that can be grounded vertically or horizontally according to room preferences. It features a well-balanced sound style that you won't get tired of, and the enclosure has plenty of capacity, so you can feel the power of the bass and the depth of the sound. There are repair marks on the exterior. Serial 10927, 10938 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (tweeter maintenance: horn polishing, magnetic circuit gap cleaning, terminal cleaning/screw replacement, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, exterior repair/polishing/oil finish, front and rear baffle repair/painting)
Accessories: No accessories
Main specifications: D130/075/N2400, 8 ohms, allowable input, 60 W, crossover frequency, 2.5 kHz, measured size W550 x H750 x D390 mm, 46.7 kg
*The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. Scratches and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
The price has been drastically reduced! 2024/3/17 sales price 69,800 yen JBL professional tweeter. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. The exterior has dullness and small scratches due to aging. Serial 81380/52416 (Yonejima Satoshi)
Maintenance information: 2024.3.17 sweep test good
Accessories: No accessories
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 278,000 yen The lively sound has been revived through careful maintenance utilizing original capacitors. JBL's rare 36cm coaxial 2-way unit LE14C is mounted on the S-99 Athena enclosure made by Utopia Equipment. The high frequencies are also connected to a cone-shaped unit, and you can enjoy a variety of music sources with smooth, natural sound. There are repair marks on the top plate and right corner. Serial 98300, 98311 (Fujisawa Yukishi)
Maintenance information: 2023.4.18 maintained (exterior maintenance (exterior cleaning/touch repair, top plate polishing/oil finish, lattice back fabric repair), unit maintenance (low frequency side: edge replacement, damper replacement, cone paper repair/coating, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning, high range side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning), Network maintenance (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~42 khz) was performed, and the original capacitor was continued to be used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf type unit 35.5 cm coaxial 2-way (LE14C) network LX2-1 crossover 2,000 Hz impedance 8 ohms W450 x H610 x D346 mm
The price has been reduced! 2024/4/10 sales price 89,800 yen The latest JBL sound with a moderate low range and a clean, clear high range, and delicate and wide range. It is a versatile speaker regardless of genre, with a good balance from low volume to high volume. The exterior has small scratches and creases on the veneer sticker on the top plate (Fujisawa Yukishi)
Maintenance information: 2024.4.10 operation confirmed
Accessories: instruction manual, spike, spike base
Main specifications: compression driver with 25mm HDI horn frequency characteristics 38 Hz to 40 kHz output sound pressure level 88 dB impedance 6 ohms crossover frequency 600 Hz/1.8 kHz W230 x D300 x H100 mm weight 22.6 kg
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1