*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
*Fully auto player with built-in phono equalizer from Denon currently sold. It is recommended for those who want to enjoy records casually without worrying about the location or for beginners. There are scratches on the exterior. Serial 0063373998 (Tamura Eiji)
Maintenance information: 2023.12.8 operation confirmed
Accessories: none
Main Specifications: Fully Auto Player Belt Drive Appropriate Needle Pressure 3.5g W360 ✕ H ✕ D370mm Weight 2.9 kg
※1 bottle only. Currently sold. A full range of 8cm high grade glass cloth cones. It has a light, unobtrusive sound and is recommended for pop music and female vocals. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.2.17 sweep test good
Accessories: No accessories
Main specifications: 6Ω 84dB 20W 0.54 kg
D/A converter equipped with a variety of input terminals in a compact body. It can only be used as a headphone amplifier when using USB. Although it is reasonably priced, it is easy to use and makes you feel that the cost performance is high. The exterior has corner fittings. Serial D53061.6027010 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: Compatible with digital signals USB 48 kHz, optical 96 kHz, and coaxial/balance up to 192 kHz, equipped with Barbrown PCM1796 x 2, W217 x H57 x D257 mm, 1.8 kg
※6 month warranty Denon USB-DAC headphone amplifier. Equipped with a full digital processing headphone amplifier using “DDFA” and a DSD 11.2 MHz and PCM384 kHz/32 bit compatible USB-DAC. It realizes delicate depiction without distortion, accurate sound localization, rich low frequencies, and reproduction that is faithful to the original sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: instruction manual, connection cord, AC adapter, original box
Main specifications: “DSD” channel/2 channels Playback frequency range 2 Hz to 100 kHz Playback frequency characteristics 2 Hz to 50 kHz (-3 dB) S/N ratio 112 dB (audible band) Dynamic range 105 dB (audible band)
“PCM” channel 2 channel playback frequency range 2 Hz to 96 kHz playback frequency characteristics 2 Hz to 96 kHz S/N ratio 112 dB dynamic range 105 dB analog audio output terminal/headphone output (stereo standard jack) x 1, unbalanced output x 1 digital audio input terminal/USB-B input x 1, optical digital input x 2, coaxial digital input x 1 W180 x H71 x D197mm (when placed horizontally) 1.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/10/21 sales price 89,800 yen ※It is cheap because there is a dent in the center cap. 38cm cone type full range unit for late model JBL. Unlike modern heavy bass, it reproduces bright and light low frequencies. This is a standard unit that can perform many types of sound makeup depending on the driver and tweeter, which is sharp and adapts well. The exterior has stains and dents on the center cap. Also, there are some repair marks on the corn paper. Serial 111548, 112952 (Miura Kimiya)
Maintenance information: 2023.10.19 Maintained (drilling repair, terminal tightening, center cap cleaning)
Accessories: No accessories
Main specifications: 38cm cone type full range unit Alnico 8Ω (measured 6.0Ω/6.6Ω) 103dB recommended enclosure internal volume 114 to 338L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
The price has been reduced. 2024/2/29 sales price 19,800 yen ※Since it is cheap, it will be handed over as is. Medium bookshelf speaker It is a car with a wood grain finish design that seems to match the interior. Recommended for those who want clear and casual fun. There is a thread on the exterior. Serial D457525/D457526 (Tamura Eiji)
Maintenance information: 2024.2.29 sweep check OK
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type playback frequency band 30 Hz to 20 kHz output sound pressure level 92 dB load impedance 8 ohms W279 x H508 x D254 mm weight 11 kg
Digital RCA cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
Digital BNC cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
XLR cable 1.3 m pair No. 3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 0.6m pair #3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital BNC cable 0.6m Yanagida audio cable with a neutral, unmistakable character. Let me ask how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An RCA cable uses 1.0 m pair of silver-plated copper wires to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. Characters disappear and there is stickiness on the plug (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: case
Mini plug to stereo standard plug conversion cable It is a model using OFC as a wire rod. (Eiji Tamura)
Maintenance information: 2022.1.5 continuity confirmed
Accessories: original box
The disposal price has been reduced! (Member prices are not applicable) 2024/3/15 sales price 248,000 yen The successor model S2 to the hit CM9 is now in stock in piano black. The three-dimensional sound field and transparent tone are of advanced witty quality. It is a versatile machine that also has a tight low frequency. There are abrasions and line marks on the exterior. Serial 0016485, 0016486 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: rubber feet, jumper plate*spikes missing
Main specifications: 3-way speaker, 8 ohms, playback frequency band, 30 Hz to 50 kHz, output sound pressure level, 89db, W320 x H1025 x D370 mm, 26.6 kg
The disposal price has been reduced! (Member prices do not apply) 2024/1/29 sales price 79,800 yen Maintained in 2023! A tube control amplifier using a CR non-feedback type equalizer section by PROFACT in Hokkaido. You can enjoy straight, realistic sound with a simple circuit configuration that omits tone control. There is a thick line scratch on the bottom of the front panel (Fujisawa Yukishi)
Maintenance information: 2023.4.13 maintenance (selector switch, TAPE monitor switch, disassembly contact polishing grease application. Volume check. (Check the operation of each input/output)
Accessories: power cord
Main specifications: use vacuum tube E88CC x 3 input PHONO2 system, LINE 2 system W480 x H105 x D300 mm 8.0 kg
The price has been reduced! 2024/3/20 sales price 59,800 yen has been maintained! This is a Sansui CD player with impressive audible sound that is both sound and resolution. The D/A conversion unit is equipped with NEWL.D.C.S, a 1-bit D/A conversion system based on crystal oscillation. The board with the side panel is broken, and there are other small scratches and a feeling of use. Serial 609080871 (Fujisawa Yukishi)
Maintenance information: 2024.3.20 Maintained (repair of the mechanical part of the traverse mechanism Assy. Create connection cable connectors. (Replace all front panel operation switches)
Accessories: No accessories
Main specifications: frequency characteristics DC to 20 kHz SNR 105 dB or more W466 x H127 x D397 mm 11 kg
The introductory model of the current model 2022 Marantz CD player is equipped with a 32-bit stereo D/A converter equipped with a digital filter switching function, and you can switch between filter 1 (slow roll off) and filter 2 (sharp roll off) according to the music to be played and your preferences. There are no particularly noticeable scratches on the exterior. Serial MBDJ112274378 (Fujisawa Yukishi)
Maintenance information: 2024.2.24 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: audio output terminal/analog unbalance x 1, coaxial digital x 1, headphone x 1, other input/output terminals, USB (front) x 1, Marantz remote bus (RC-5) input/output x 1, W440 x H105 x D341 mm 6.5 kg
A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
The 1.5m silver conductor digital RCA cable is bright, light, and has a clear outline that looks like it's made of silver. On the exterior, there are brown spots (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
Maintained! Following the technology at the time of development of the advanced C-2302, a balanced configuration was adopted for the advanced α-X circuit and power supply unit. The sense of strength and driving power of the highest class as a premain is attractive. The exterior has a feeling of use over time, with dullness and small scratches scattered around. ※The side panel has been repaired with veneer, but there are floats and cracks. Serial 622093718 (Yonejima Satoshi)
Maintenance information: 2024.3.24 Maintained (Mayi amplifier circuit transistor, diode replacement. Adjust volume, replace output relay. Hendphone relay replacement. Power supply transistor replacement. Disassemble the input selector and other switches and apply polishing grease (turnover, tone, muting, loudness, subsonic, processor, MM/MC switching, power amplifier direct, source direct, reck-out, tape). Solder repair. Each volume, switch cleaning. Internal inspection and cleaning. Mounting screw rust remover. Bias, DC adjustment, operation confirmation. Decorative panel repair. (Adhesive repair with bond G17)
Accessories: copy of instruction manual
Main specifications: 160W+160W (8Ω) 190W+190W (6Ω) phono equipped with advanced α-x balance circuit (MM/MC switching) dimensions W460 x H161 x D446 mm weight 33 kg
Maintained. The 707 series plays a central role in Sansui. The PHONO2 system is compatible with MM/MC on both sides, and since it is compatible with all MC cartridges, it is a great product that can switch between 2 levels of impedance: low and high. This is an amplifier I definitely want you to listen to records to your heart's content. The exterior has dullness, scratches, and dirt. Serial 823050972 (Tamura Eiji)
Maintenance information: 2024.3.10 maintained (input selector, reck-out, tone switch disassembly, polishing grease application, master volume replacement, output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, power supply floating resistor replacement, solder repair, each volume, switch cleaning, pin jack polishing, interior and exterior inspection and cleaning, offset, bias (Adjust, check operation)
Accessories: No accessories
Main specifications: 110W+110W size W460 x H160 x D404 mm weight 15 kg
This is a rare Audio-Technica sampling rate converter. The output can be changed to 32/44.1/48khz. It's an item that you can enjoy in a variety of ways, such as recording and playback. Externally, there is a scratch on the top plate. Serial 644035 (Tamura Eiji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: input (32/44.1/48 kHz) 3 systems: optical/coaxial output (32/44.1/48 kHz) 1 system: optical/coaxial
※There is no problem with operation, but since it is cheap, it will be handed over as is. A compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier that does not have a phono input. Perfect as an introductory machine (Fujisawa Yukishi)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: AC adapter
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating applied to both the connector and plug. There is dullness and small scratches (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The price has been reduced! 2024/3/7 sales price 79,800 yen Maintained! 120V specification SUMO control amplifier hosted by amplifier design genius James Bongiorno. Compared to amplifiers from the GAS era, the sound is cleaner, but the elastic low frequency bounce method is still alive and well. It is one that uses toroidal transformers and high quality parts, and makes you feel that they are particular about it. On the exterior, abrasions and line scratches are conspicuous on the top plate. Serial H (Yonejima Satoshi)
Maintenance information: 2024.3.25 Maintained (Earth float re-fixed. (*Since AC120 is specified, a hum may occur at 100V.)
2024.3.7 Maintained (internal inspection check, PHONO changeover SW, INPUT/TAPE changeover SW cleaning. Transistors, resistors, and capacitors can be checked. Operation check)
Accessories: No accessories
Main specifications: 6 inputs, 2 PRE OUT terminals, W480 x H40 x D220 mm, weight 8.0 kg
Uses a damping aluminum ring and a large diameter driver. Open-type full-scale headphones with a wider sound field. There is no habit, and it is a great car even for beginners. (FUJISAWA KOSHI)
Maintenance information: 2024.2.25 Sound output operation confirmed
Accessories: instruction manual, original box
Main specifications: open air dynamic type, φ53mm, output sound pressure level, 96 dB, playback frequency band, 15 to 27,000 Hz, maximum input, 700 mW, impedance: 35 ohms, mass: 275 g
A high-precision level gauge that is essential for leveling players. This is a long-selling model with an aluminum body (Tamura Eiji)
Accessories: none
Dry record cleaner made with premium velvet. The easy-to-hold shape allows you to clean records effectively. There is dullness and a feeling of use (Tamura Eiji)
Accessories: none
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
A very rare Lux noise cutting transformer. It cuts harmful noise from the power supply and enables high-quality music playback. What is the exterior. There are threads and dullness. Serial 21030124 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: instruction manual
Main specifications: W231 x H137 x H207 mm 6.9 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/7/31 Sales price 15,000 yen*Currently sold. It is a 2.1 channel speaker system that perfectly matches Bose's unique compact, high-performance speaker technology with bass reproduction technology. You can easily enjoy simple 2.1 channels. As for the exterior, there are cracks in the woofer cabinet, overall dullness, and small scratches. Serial 990701 (Yonejima Satoshi)
Maintenance information: 2023.7.31 Operation confirmed
Accessories: no accessories
Main Specifications: Rated Input 100W Impedance 6Ω Satellite Speaker 6.0 cm Driver x 2, Antimagnetic Type, W78 x H157 x D104 mm, 1.1 kg, Subwoofer, 13 cm, 2 Drivers, W485 x H358 x D192 mm, 9.1 kg
Maintained. model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. The exterior has dullness, scratches, etc. Serial 0850701830 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (loading gear and slider gear replaced due to cracked loading belt, cleaning for sticky tray paint, pick-up relay board connector contact cleaning, lens cleaning, inspection of various operations)
Accessories: remote control, instruction manual, power cord, spike, spike holder
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
The disposal price has been reduced! Member prices are not applicable. 2024/3/16 sales price 498,000 yen Maintained! This is a rare black baffle-type combination of the Mantalay Horn 604-8H+ enclosure. It has a coaxial-like set of sounds, and it's an exhilarating sound with a crisp, easy-to-pop sound. Perfect for enjoying ALTEC sound for home use. As for the exterior, there is a small scratch on the top plate. Serial 016310/016309 (Yonejima Satoshi)
Maintenance information: 2024.3.16 Maintained (network maintenance: frequency characteristic check, ATT cleaning)
Accessories: saran net
Main Specifications: Alnico Magnet 604-8H Frequency Characteristics: 20Hz to 22kHz Allowed Inputs: 45W Impedance: 8Ω Output Sound Pressure Level: 103dB W660 x H1,020 x D460 mm 68.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/10/6 sales price 44,000 yen ※It is cheap because the front is in poor condition, such as stickiness on the front. A new-generation model of the DM600 series. The tweeter is a Nautilus tweeter, which is also used in the high-end series, and the woofer uses a unique refined woven Kevlar cone. The sound is clear and delicate, and responds well to rock, fusion, classical chamber music, etc. from low to medium to high frequencies. As for the exterior, there is stickiness on the front baffle and edge due to urethane deterioration. Serial 0126179, 0126180 (Yonejima Satoshi)
Maintenance information: 2023.10.6 sweep test good
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex playback frequency band 42Hz to 50kHz 88dB 8Ω W198 x H340 x D331 mm 7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg