Everything from unit and network overhauls to exterior maintenance has been completely refreshed! This is a Lancaster equipped with a 12 inch monitor GOLD. The small feel of the high-efficiency 12-inch unit and the hole tone that sounds throughout the box are unique to this model. It sounds one size smaller than RECTANGLAR, and is compatible with tube amplifiers. There are some repair marks left, but the finish is beautiful. (FUJISAWA KOSHI)
Maintenance information: 2024.3.28 maintained (exterior repair/polishing/clear finish, rear baffle repair/painting, saran net cleaning/repasting, sound-absorbing material detachable, unit maintenance: magnetic circuit gap cleaning/center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, ATT cleaning, terminal mounting processing)
Accessories: No accessories
Main specifications: 2 way, 1 speaker, bass reflex system, floor type, 12inch coaxial 2-way (MONITOR GOLD) frequency band 25 to 20,000 Hz minimum resonance frequency 20 Hz maximum input 30 W output sound pressure level 90.5 dB 8 Ω W535 × H840 × D320 mm 28.45 kg
Maintained. Vacuum tube stereo power amplifier. A bright, fresh sound typical of DYNACO. The middle range is thick and has a sense of temperature, and it sounds more powerful than I expected. This is an amplifier I want to play in combination with JBL, Altec, etc. The exterior has oxidation, rust, and line damage (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Maintained (Electrolytic capacitors and AC cords replaced each due to deterioration. Rubber foot replacement. Solder correction. Vacuum tube pin cleaning. Remove foreign objects. Wiring restyling. Bias check. I checked the output sound. (Although it is AC117V specification, it can operate at AC100V.)
Accessories: No accessories
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
Maintained by Electri, including replacing the windshield panel with a new one! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 manufacturer maintained (windshield panel replacement. Replace the Oring to fix the switch bezel. Due to a problem with the operational amplifier, characteristics were poor, and the voltage was unstable, so a lot of pop noise was generated when the front volume display was off. IC exchange. Capacitors were replaced at various other locations. Replaced due to filter capacitor deterioration. Other relays, transistors, etc. have been replaced just in case, but please be aware that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement. There is a difference in meter runout when the volume is low, but when the output is raised about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments have been made so that they fit at a position of approximately half a meter. Same confirmation and other inspections.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
Maintained! A control amplifier with a thorough review of the equalizer amplifier, which is important for record playback. It's perfect for those who want to make analog sounds moist. The retro look is also GOOD. The exterior has a feeling of use such as dullness and small scratches. Serial 111076 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 maintained (rec function, tape monitor, gain, tape monitor, LOW HIGH filter, mode switch disassembly, polishing grease application, other volumes, switch cleaning, solder repair, power cord replacement, capacitor replacement, pin jack cleaning, operation check. (*The front pin jack input is fixed with rivets, so there is a lag ※When switching the impedance of the phono, the resistance value changes and the operation is normal, but there is not much change)
Accessories: none
Main specifications: phono circuit: MM2 system Phono 1:2.5 mV/50 kΩ Phono 2:2.5 mV/30 kΩ, 50 kΩ, 100 kΩ W410 × H170 × D270 mm 7 kg
*The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it remains the same)
Accessories: none
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
A passive controller with minimal functionality packed tightly and compactly. You can level, mute, and monossum stereo sources. Serial S211100256C9RGU (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input XLR/standard phone jack complex 1 system, mini phone jack 1 system output XLR/standard phone jack complex 1 system, 1 mini phone jack system W145 x H69 x D85 mm 0.4 kg
※Since it is for business use, it will be handed over as is. This unit has 4 built-in circuits for converting unbalanced output to balanced output, and 4 circuits for converting balanced input to unbalanced input. In addition, it also functions as an audio distributor that can separate one unbalanced input into multiple balanced outputs using an INPUT LINK switch equipped between each channel. Serial 790070 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: No accessories
Main specifications: UNBALANCED TO BALANCED input RCA pin jack ✕ 4 output XLR type connector ✕ 4 BALANCED TO UNBALANCED input XLR type connector ✕ 4 output RCA pin jack ✕ 4 size W482 ✕ H48 ✕ D196mm weight 2.8 kg
A custom-made line selector manufactured by A.Y. Electronics/L Sound. It is possible to switch between 3 channels.
There is dullness and dirt. (FUJISAWA KOSHI)
Maintenance information: 2024.3.28 continuity confirmed
Main specifications: W160 x H81 x D133 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/3/15 sales price 248,000 yen The successor model S2 to the hit CM9 is now in stock in piano black. The three-dimensional sound field and transparent tone are of advanced witty quality. It is a versatile machine that also has a tight low frequency. There are abrasions and line marks on the exterior. Serial 0016485, 0016486 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: rubber feet, jumper plate*spikes missing
Main specifications: 3-way speaker, 8 ohms, playback frequency band, 30 Hz to 50 kHz, output sound pressure level, 89db, W320 x H1025 x D370 mm, 26.6 kg
The price has been drastically reduced! 2024/3/22 sales price 248,000 yen The initial main weight split type has been revived with genuine maintenance by Rizaye! It is a popular model with a full range of cartridges that can be used. In addition to the glossy, smooth tone due to the metal knife edge, it is a famous machine that boasts deep chiseled sound quality. An earth cable is not attached, but it is an original specification that diverts the ground with Rch-. The main weight is a large type
Maintenance information: 2023.5.17 maintenance (main unit disassembly check and cleaning, bed plate grommets x 4 replacement, inspection and adjustment of each part, and operation check)
Accessories: instruction manual (copy), dedicated cable
Main specifications: statically balanced needle pressure 0 to 5 g, cartridge weight 1.5 to 26 g
The disposal price has been reduced! Member prices are not applicable. 2024/3/22 sales price 168,000 yen Maintained! UK Spendall bookshelf speakers. It has a fresh and cohesive expression, and has an elegant sound typical of being made in England. It's a natural, well-balanced sound that you can't imagine from this size. There are no noticeable scratches on the exterior. Serial 223E11345, 223E11346 (Sato Wataru)
Maintenance information: 2024.3.22 Maintained (separate and disassemble the magnetic circuit and vibration system of the single-sided woofer. Removes iron powder etc. from magnetic circuit slits and prevents corrosion. Cone adhesive peeling repair, coil deformation, round out A vibration system is incorporated into the magnetic circuit to adjust centering. Enter a sine wave and check that there is no vibration or distortion)
Accessories: saran net, jumper plate
Main specifications: bass reflex input 80W sound pressure 88dB impedance 8Ω crossover frequency 4kHz frequency characteristics 60-20kHz W220 x H400 x D280 mm weight 9.5 kg
The price has been drastically reduced! 2024/3/24 sales price 998,000 yen*Upgraded product from KLIMAX DS. A DS/3 model equipped with KATALYST and finally compatible with DSD. A reference model for Lin's network player. This time, a significant upgrade has been achieved by reviewing not only the chip but also the audio circuit. There are some scratches on the exterior. Serial 1322666 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 Operation confirmed (Software: 4.104.518)
Accessories: remote control, power cord
Main specifications: maximum compatible sampling frequency 382 kHz/24 bit DSD11.Line output: XLR balance x 1, RCA unbalance x 1 W350 ✕ H60 ✕ D344 mm weight 10.0 kg
The disposal price has been reduced! Member prices are not applicable. 2024/3/24 sales price 298,000 yen This model was created through an upgrade service performed for users of the first KLIMAX DS. It is packed in a compact housing, and operation buttons, display, remote control, etc. are omitted, but you can enjoy “KLIMAX” quality sound quality, which sets it apart from AKURATE. There are some scratches on the exterior. Serial 1385848 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 Operation confirmed (Software: 4.104.518)
Accessories: power cord
Main specifications: Compatible file formats FLAC/WAV/MP3/AIFF compatible sampling frequency 44.1k/48k/88.2k/96k/176.4k/192 kHz compatible bits 16 to 24 bits output RCA1 system/XLR1 system size approx. W322 x D265 x H50 mm weight approx. 2 kg
The price has been drastically reduced! 2024/3/26 sales price 158,000 yen Maintained by Luxman Service in 2022/10! Line-specific control amplifiers. It's a control amplifier that can be called Luxman's turning point. The volume is well built, and the sound quality is mild and makes you feel thick from low volume. It's soft and supple like a lux, so you can relax and listen for a long time. The exterior has abrasions, scratches, and line marks. Serial A10310255 (Sato Wataru)
Maintenance information: 2022.10.10 Maintained by the manufacturer (each stage phase correction capacitor has been replaced due to deterioration, each part has been inspected, and readjusted. Operation test OK) 2020.10.2 manufacturer maintenance completed (ATT, VR, SW contact cleaning, base solder correction, pilot lamp replacement, operation check of each part)
Accessories: none
Main specifications: 1 CD input system (RCA/XLR switching), line input, 5 systems, frequency characteristics, 5 Hz to 100,000 Hz, SNR ratio, 110 dB or more, line phase sensor dimensions W444 x H120 x D414 mm weight 11 kg
The price has been drastically reduced. 2024/3/15 sales price 398,000 yen Maintained! It is a vacuum tube amplifier that is the younger brother of the Meiki MC275. The moderate stickiness and rich sound are good hues unique to vintage McKinn. It is less rough than the MC275, and you can feel the high level of relaxed musicality. The exterior has oxidation and rust, and there are dents and scratches on the transformer (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (choke transformer rewound repair. Vacuum tube 12BH7 deterioration replacement. Block capacitor 35/80/15 μF defective replacement. 150 μF block capacitors made in Japan → replace 2 with CE ones. Replace 4 0.047 μF film capacitors for defects and deterioration. Replace 3 100 μF electrolytic capacitors and other deterioration. 2 1W resistors and 1/2W deterioration replacements Vacuum tube socket and RCA jack caulk repair. *There is a part of the SP terminal missing. (AC cord has been replaced with Hitachi by another company)
Accessories: No accessories
Main specifications: 25W+25W vacuum tube 7591 (output tube), 12BH7, 12AU7, 12AX7 W232 x H178 x D368 mm 15.4 kg
We've reduced the price! 2024/3/27 sales price 148,000 yen Maintained. Vacuum tube stereo power amplifier. A bright, fresh sound typical of DYNACO. The middle range is thick and has a sense of temperature, and it sounds more powerful than I expected. This is an amplifier I want to play in combination with JBL, Altec, etc. There are scratches and oxidation on the exterior (Tamura Eiji)
Maintenance Information: 2024.3.27 Maintained (Electrolytic Capacitors, Fuse Holders, and AC Cords due to faulty and deteriorated AC cords, additional screws, solder correction, vacuum tube pin cleaning. Bias check output audio check. (Can be operated at AC100V)
Accessories: No accessories
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
We've reduced the price! 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. Internal all-check, Lch power stage Tr x 3 large leak DC cut C, gain setting C off → replace. (No AC line fuse, installation, operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Interior and exterior maintenance has been completed, including all exterior paint! One of Japan's leading monitor speakers, which continued to be made over a long period of 23 years from 1974 to 1997. The clear sound image of the Beryllium tweeter+scoker is an straightforward woofer that attractively reproduces the detailed expressions of even the latest recording discs. It is no exaggeration to say that this model is a timeless masterpiece. Serial 48037L 48037R (Hiura Katsuji)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Digital BNC cable 0.6m Yanagida audio cable with a neutral, unmistakable character. Let me ask how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 1.3 m pair No. 3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 0.6m pair #3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An XLR cable 0.6m pair, a Yanagida audio cable with a neutral character. The spread and sound image will improve. The cable is stiff, so be careful when handling it. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0m pair of XLR cable terminals is an inexpensive yet cost-effective cable made by Neutrik. It's a powerful linear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0 m BNC to RCA specification high quality eco-friendly material sheath is used for the digital cable, and OFC is used as the conductor. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Exclusive resonance with fine-tuned tuning for the 1.0m Z-DTC01W digital RCA cable
Chip Connect is standard equipment. Highly fresh sound can be obtained by virtual direct connection of contacts. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital RCA cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
Digital BNC cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
Maintained. model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. The exterior has dullness, scratches, etc. Serial 0850701830 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (loading gear and slider gear replaced due to cracked loading belt, cleaning for sticky tray paint, pick-up relay board connector contact cleaning, lens cleaning, inspection of various operations)
Accessories: remote control, instruction manual, power cord, spike, spike holder
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
This item converts unbalanced input to balanced output. It has a loop through function. The exterior has scratches and paint bald spots (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: instruction manual
Main specifications: 4 unbalanced inputs, 4 balanced outputs, W210 x H44 x D230 mm, 2.3 kg
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
※There is no problem with the operation, but since there is no manufacturer, it will be handed over as is. CSE isolation regulator. It is recommended for those who live in the Kanto area and have a 60Hz player or the like. The exterior has some dullness and scratches. Serial 710716 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main Specifications: Isolation Regulator Input Voltage 90-110V Rated Output Voltage 100V Rated Output Power 30W W214 x H85 x D163 mm 4 kg
Digital RCA cable 1.0m uses pure silver conductors at a reasonable price. Not to mention the sound quality, the high amount of information and accurate reproduction without coloring is possible (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.5m silver conductor digital RCA cable is bright, light, and has a clear outline that looks like it's made of silver. On the exterior, there are brown spots (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An RCA cable uses 1.0 m pair of silver-plated copper wires to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. Characters disappear and there is stickiness on the plug (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: case
PC-Triple C is used as the 1.0 m pair conductor of the RCA cable, and RCA rhodium-plated small terminals are used. It clearly expresses even the smallest details with a clear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
RCA cable 1.0 m pair The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has a high resolution and is an exciting sound that comes out quickly. There is some discoloration on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating applied to both the connector and plug. There is dullness and small scratches (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m BNC specification Belden digital cable and video cable for audio. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Compact belt drive CD player. The D/A converter section is a dual mono configuration equipped with 2 units of the latest Barbrown PCM1792 (192 kHz/24 bit) independently on the left and right. The drive method unique to CEC contributes to the smoothness of the sound. The exterior is dull and dirty. Also, the buttons on the remote control have changed color and the rubber part has deteriorated. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: analog output: 1 unbalanced and balanced system, digital output: TOS, 1 coaxial, AES/EBU system each W217.5 x D448 x H111 mm approx. 7.2 kg
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
※It is inexpensive because it is in poor condition, such as rust. Set of 4 high-carbon cast iron stands with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has rust spots, dirt, etc. (Tamura Eiji)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
An ultra-compact variable frequency channel divider. This is a product that allows you to easily enjoy multiple amps, and it is a must-see for those who want to try out multiple amps in the future. There are small scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: AC adapter
Main specifications: crossover frequency 1 kHz to 6 kHz continuously variable W109 x H28 x D60 mm approx. 240 g
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product There is dirt on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
A sound quality improvement accessory that applies remastering technology performed in recording studios, etc. An analog input audio signal is internally converted into a digital signal, and after performing unique processing, it is converted back to analog audio and output. In terms of sound quality, expressiveness is improved, and smoothness comes out. The exterior is dull and has thin threads. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: W190 x H56 x D220 mm 0.9 kg