Center speaker stand from unknown manufacturer. It is a type that is easy to handle, with wooden casters. There are threads on the exterior. (MIURA Kimiya)
Accessories: none
Main specifications: W570 ✕ H225 ✕ D440mm 4kg
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
Exclusive resonance with fine-tuned tuning for the 1.0m Z-DTC01W digital RCA cable
Chip Connect is standard equipment. Highly fresh sound can be obtained by virtual direct connection of contacts. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0 m BNC to RCA specification high quality eco-friendly material sheath is used for the digital cable, and OFC is used as the conductor. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep check OK
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
*Currently sold. Yamaha superwoofer equipped with a 20 cm x 2 double woofer. Equipped with active servo technology and a 150W high-power amplifier, it plays bass that is small yet full of volume. There is dirt, dirt and dullness on the exterior, and some floating on the bottom. Serial Z117079QS (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: No accessories
Main specifications: used unit 20 cm cone type x 2 rated output 150 W (5 ohms) playback frequency band 20 Hz to 160 Hz high cut filter 40 Hz to 140 Hz, continuously variable W235 x H602 x D463 mm 20 kg
The price has been drastically reduced! 2024/3/24 sale price 350,000 yen genuine Noah product. Dr. Ficult's armless turntable and 2 woodpeckers, which will be the first to arrive at Hi-Fi Hall, are now in stock! A simple structure with a belt drive for a 4.5 kg platter. It also supports 78 rotations and is compatible with SME 9 to 12 inch arms. Please enjoy the high sound quality of the advanced model Yuzuri. There are some scratches on the exterior. Serial 0247 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 rotation operation confirmed
Accessories: instruction manual, AC adapter, stabilizer, protractor
Main specifications: belt drive 33, 45, 78 rotations W480 × H150 × D380 mm 17.5 kg
Maintained. A masterpiece CD player boasting one of the most popular WADIA history. Genuine AXISS Combining elements that contradict the strength of the low frequency core and the richness of the sense of volume, the expressive power full of dynamism is of the highest quality for a single body type. The strong sense of energy that fully brings out the strengths of the VRDS mecha is a must-listen for jazz and rock fans. There is overall dullness and small scratches. It received a spike and is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.3.19 Maintained (The drive belts for the clamp mechanism part and the loading mechanism part have been replaced.
(CD playback RF level 1.0 Vp-p was ensured by adjusting the pickup's electrical system and mechanical system, and CD and CD-R playback tests are excellent)
Accessories: remote control, power cable
Main specifications: VRDS mechanism digital output/AES/EBU x 1, BNC x 1, ST x 1 analog output/XLR x 1, RCA x 1 W350 x H155 x D408 mm 15 kg
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
※1 bottle only. A vertical stand dedicated to the company's 33WER/33WER-S. If you've been looking for one, don't miss this opportunity. (YONEJIMA Satoshi)
Accessories: instruction manual, original box
Main specifications: actual measurement approx. W202 x H65 x D202 mm weight 950 g/unit
Digital RCA cable 1.0m uses pure silver conductors at a reasonable price. Not to mention the sound quality, the high amount of information and accurate reproduction without coloring is possible (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/3/21 sales price 228,000 yen This amplifier was planned to commemorate the 35th anniversary of Aura Design. This anniversary model, which bears the VA40 of the first model, is a model that faithfully reproduces the circuit design at that time. The MOSFET single push-pull reproduces fresh sound. This model will be a domestically manufactured model. The exterior is beautiful with no noticeable scratches. Serial ARI0018 (Tamura Eiji)
Maintenance information: 2024.3.21 operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 50W+50W (8Ω) W430 x H76 x D350 mm weight 7.2 kg
※Since the screw fixing part is missing, it is inexpensive. The needle tip is JICO/VN45HE. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The stylus is moving slightly to the left (Tamura Eiji)
Maintenance information: 2023.12.26 operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
This item converts unbalanced input to balanced output. It has a loop through function. The exterior has scratches and paint bald spots (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: instruction manual
Main specifications: 4 unbalanced inputs, 4 balanced outputs, W210 x H44 x D230 mm, 2.3 kg
※The hood is missing. TVA-1 is a famous British vacuum tube power amplifier. Equipped with a sturdy, heavy transformer, this is reflected in sound quality. The sound quality is thick and has good extrusion, and the driving power is off par. You can enjoy the attractive vacuum tube sound with the tenacity of the mid-range and the bright mid-high range. ※Since glass fragments are mixed into one bottle of KT88, it makes a rattling sound, but there is no effect on performance. On the exterior, dullness and oxidation can be seen on the chassis (Yonejima Satoshi)
Maintenance information: 2022.7.28 Maintained (power plug replacement. 2 vacuum tube KT88 replacements (electro-harmonix). 2 12AX7 vacuum tube replacements (SOVTEK etc.) 6 5W and 3W resistors Power toggle switch replacement. Vacuum tube socket and RCA jack caulk repair. Other operation has been checked (measured at 78W SP:8Ω with rated output AC100V) *Please use this model at AC100V. Also, do not move the vacuum tube as much as possible. (Noise levels, etc. have been optimized)
Accessories: No accessories
Main specifications: 2 phono systems (MM), 5 input systems, 2 output systems, dimensions W480 x H90 x D360 mm, weight 7.4 kg
Compact belt drive CD player. The D/A converter section is a dual mono configuration equipped with 2 units of the latest Barbrown PCM1792 (192 kHz/24 bit) independently on the left and right. The drive method unique to CEC contributes to the smoothness of the sound. The exterior is dull and dirty. Also, the buttons on the remote control have changed color and the rubber part has deteriorated. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: analog output: 1 unbalanced and balanced system, digital output: TOS, 1 coaxial, AES/EBU system each W217.5 x D448 x H111 mm approx. 7.2 kg
The price has been reduced. 2024/3/15 sales price 69,800 yen Maintained! 50Hz specification * Rotation is slightly fast, but this is the current situation due to product limitations (this is a level you can't understand when playing music) A rare vintage turntable that uses a belt drive system. An ultra-low speed 16-pole hysteresis synchronous motor is mounted as the drive motor, and a TP-13 is mounted on the tone arm. In addition to the tasteful design, you can enjoy the supple and mild sound typical of Torrens. There are scratches and line marks on the exterior. Serial 09070 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (belt replaced. Power cord and phono cable replacement Clean the motor and lubricate all parts. Arm elevation cylinder cleaning grease application. (Since there is no rotation synchronous motor adjustment, it flows slightly)
Accessories: instruction manual, genuine headshell
Main specifications: 16-pole hysteresis synchronous motor External dimensions: W394 x H125 x D325 mm Weight approx. 6.7 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/8 sales price 59,800 yen ※Saran net is out of stock. This is an attractive Victor powered subwoofer with a focus on accurate bass reproduction. The crossover can also be controlled from 40 to 120 Hz, and it is also possible to adjust the optimal sound to suit your preferences. There are thin threads on the exterior. Serial 094W0070 (Fujisawa Yukishi)
Maintenance information: 2024.3.8 operation confirmed
Accessories: power cord
Main specifications: sealed 30cm cone 88dB playback band 16 to 250 Hz maximum output 600 W W390 x H390 x D445 mm 25 kg
Maintained. Vacuum tube stereo power amplifier. A bright, fresh sound typical of DYNACO. The middle range is thick and has a sense of temperature, and it sounds more powerful than I expected. This is an amplifier I want to play in combination with JBL, Altec, etc. The exterior has oxidation, rust, and line damage (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Maintained (Electrolytic capacitors and AC cords replaced each due to deterioration. Rubber foot replacement. Solder correction. Vacuum tube pin cleaning. Remove foreign objects. Wiring restyling. Bias check. I checked the output sound. (Although it is AC117V specification, it can operate at AC100V.)
Accessories: No accessories
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
Air bow stabilizer. Can be used with all AIRBOW belt drive CD transporter players and CEC TL3, TL3N, TL5100, TL51 Series, etc. (Tamura Eiji)
Accessories: original box, manual
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
The price has been reduced! 2024/1/18 sales price 19,800 yen ※Currently sold. A compact bookshelf speaker with DALI's traditional wood fiber cone. The natural tone and high cost performance are attractive. The exterior is dull. Serial 7105075L 7105057R (Yonejima Satoshi)
Maintenance information: 2024.1.18 sweep test good
Accessories: saran net
Main specifications: 2 way 83 dB 6 ohm bass reflex type W140 x H237 x D195 mm 2.6 kg
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji)
Maintenance information: 2024.3.6 continuity confirmed
Accessories: No accessories
An XLR cable 0.6m pair, a Yanagida audio cable with a neutral character. The spread and sound image will improve. The cable is stiff, so be careful when handling it. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
A speaker stand with a firm and stable feel. The size is just right for medium speakers such as the NS-1000M. By changing the direction of the middle plate, the width can be changed from about 320 mm to 360 mm. The exterior has dirt and some carpet on it (Tamura Eiji)
Accessories: none
Main specifications: Speaker stand W350 x D300 x H247 mm approx. 6 kg/book
The disposal price has been reduced! (Member prices are not applicable) 2024/3/2 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yonejima Satoshi)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: No accessories
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
A sound quality improvement accessory that applies remastering technology performed in recording studios, etc. An analog input audio signal is internally converted into a digital signal, and after performing unique processing, it is converted back to analog audio and output. In terms of sound quality, expressiveness is improved, and smoothness comes out. The exterior is dull and has thin threads. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: W190 x H56 x D220 mm 0.9 kg
※There is no problem with the operation, but since there is no manufacturer, it will be handed over as is. CSE isolation regulator. It is recommended for those who live in the Kanto area and have a 60Hz player or the like. The exterior has some dullness and scratches. Serial 710716 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main Specifications: Isolation Regulator Input Voltage 90-110V Rated Output Voltage 100V Rated Output Power 30W W214 x H85 x D163 mm 4 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2022/5/18 sales price 2,000 yen When used between an S-terminal AV noise filter device and a display, unnecessary noise is removed without deteriorating the amount of information or high frequency characteristics of the video signal at all, and the video signal is organized. The exterior is dull and dirty, and there are floating marks on the label. (TAMURA Eiji)
Maintenance Information: 2022.5.18 Continuity Confirmed
Accessories: There are no accessories
The tone is bright and intense, and it comfortably plays delicate tones with a smooth connection. It has a smooth tone throughout the entire area and can be used for a wide range of applications. One terminal jumper is missing. The exterior is dull and has small scratches. Serial 1321681G/1321813G (Yonejima Satoshi)
Maintenance information: 2024.3.20 sweep test good
Accessories: jumper plate (1 missing)
Main specifications: 39 Hz to 27 kHz 8Ω 91 dB/w/m W240 × H880 × D320 mm 14.5 kg
The 1.0m pair of XLR cable terminals is an inexpensive yet cost-effective cable made by Neutrik. It's a powerful linear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Maintained! A control amplifier with a thorough review of the equalizer amplifier, which is important for record playback. It's perfect for those who want to make analog sounds moist. The retro look is also GOOD. The exterior has a feeling of use such as dullness and small scratches. Serial 111076 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 maintained (rec function, tape monitor, gain, tape monitor, LOW HIGH filter, mode switch disassembly, polishing grease application, other volumes, switch cleaning, solder repair, power cord replacement, capacitor replacement, pin jack cleaning, operation check. (*The front pin jack input is fixed with rivets, so there is a lag ※When switching the impedance of the phono, the resistance value changes and the operation is normal, but there is not much change)
Accessories: none
Main specifications: phono circuit: MM2 system Phono 1:2.5 mV/50 kΩ Phono 2:2.5 mV/30 kΩ, 50 kΩ, 100 kΩ W410 × H170 × D270 mm 7 kg
The price has been drastically reduced! 2024/3/8 sales price 99,800 yen Maintained! AC120V specification. The low frequency response is good, there is plenty of room above the housing, and I definitely want to listen closely to the mid to high frequencies. It is a power amplifier with an output stage configured using the TL (transconductance linearization) circuit system, which is patented by the company using MOS-FET. BTL connection is possible, and it can be used as a 400W monaural amplifier. The exterior has bumps, scratches, etc. Serial 3200716 (Fujisawa Yukishi)
Maintenance information: 2024.3.8 Maintained (all internal checks. C, R, TR, FET, etc. are OK. Operation test)
Accessories: power cable
Main Specifications: 120W+120W (8Ω) 200W+200W (4Ω) Input Impedance: 47kΩ Damping Factor: 500 W480 x H140 x D300 mm 14.0 kg
*The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it remains the same)
Accessories: none
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
※The remote control is missing, and there is noticeable discoloration on the side, so it's cheap. Marantz's premain amplifier with an attractive, thin, and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers are also a good match, so you can choose any music genre. The exterior has stains, line scratches, and paint bald spots on the sides. Serial MZ00984231004 (Sato Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
Phono cable 0.7 m 5 pin → XLR uses PC-Triplec, a new dream conductor using a forging method developed as the world's first dedicated audio conductor. It doesn't make you feel the distortion, noise, or incidental sound, which are the advantages of single wires (Tamura Eiji)
Maintenance information: 2024.3.24 continuity confirmed
Accessories: none
※It is inexpensive because the condition is poor due to scratches, threads, and partial sheath deformation. Off sale power cable, 1.0 m, has an unprocessed end that combines performance and safety at an astonishing level. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: No accessories
Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: diameter 35 mm x 3 mm (thickness)
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Yonejima Satoshi)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole