XLR cable 1.3 m pair No. 3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 0.6m pair #3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An XLR cable 0.6m pair, a Yanagida audio cable with a neutral character. The spread and sound image will improve. The cable is stiff, so be careful when handling it. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital BNC cable 0.6m Yanagida audio cable with a neutral, unmistakable character. Let me ask how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Center speaker stand from unknown manufacturer. It is a type that is easy to handle, with wooden casters. There are threads on the exterior. (MIURA Kimiya)
Accessories: none
Main specifications: W570 ✕ H225 ✕ D440mm 4kg
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
A new dust cover has been created and maintained! A record player with high cost performance by inheriting technology obtained with the GT-2000. It conveys all the goodness of analog discs where power and subtlety coexist and you can enjoy rich overtones. There are scratches and bumps on the exterior. Serial 01638 (Fujisawa Yukishi)
Maintenance information: 2024.2.16 Maintained (new dust cover created. Motor bearing grease up, O-ring replacement. Arm lifter grease up. Arm disassembly cleaning and pivot adjustment. Electrolytic capacitor replacement. Check turntable rotation speed and check arm needle pressure. Check the sound output. (Simple exterior cleaning, comprehensive operation confirmation inspection)
Accessories: instruction manual, EP adapter
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W532 x H220 x D388 mm 22 kg
*Currently sold. Yamaha superwoofer equipped with a 20 cm x 2 double woofer. Equipped with active servo technology and a 150W high-power amplifier, it plays bass that is small yet full of volume. There is dirt, dirt and dullness on the exterior, and some floating on the bottom. Serial Z117079QS (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: No accessories
Main specifications: used unit 20 cm cone type x 2 rated output 150 W (5 ohms) playback frequency band 20 Hz to 160 Hz high cut filter 40 Hz to 140 Hz, continuously variable W235 x H602 x D463 mm 20 kg
※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep check OK
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
Interior and exterior maintenance has been completed, including all exterior paint! One of Japan's leading monitor speakers, which continued to be made over a long period of 23 years from 1974 to 1997. The clear sound image of the Beryllium tweeter+scoker is an straightforward woofer that attractively reproduces the detailed expressions of even the latest recording discs. It is no exaggeration to say that this model is a timeless masterpiece. Serial 48037L 48037R (Hiura Katsuji)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
Maintained. A masterpiece CD player boasting one of the most popular WADIA history. Genuine AXISS Combining elements that contradict the strength of the low frequency core and the richness of the sense of volume, the expressive power full of dynamism is of the highest quality for a single body type. The strong sense of energy that fully brings out the strengths of the VRDS mecha is a must-listen for jazz and rock fans. There is overall dullness and small scratches. It received a spike and is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.3.19 Maintained (The drive belts for the clamp mechanism part and the loading mechanism part have been replaced.
(CD playback RF level 1.0 Vp-p was ensured by adjusting the pickup's electrical system and mechanical system, and CD and CD-R playback tests are excellent)
Accessories: remote control, power cable
Main specifications: VRDS mechanism digital output/AES/EBU x 1, BNC x 1, ST x 1 analog output/XLR x 1, RCA x 1 W350 x H155 x D408 mm 15 kg
Maintained. model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. The exterior has dullness, scratches, etc. Serial 0850701830 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (loading gear and slider gear replaced due to cracked loading belt, cleaning for sticky tray paint, pick-up relay board connector contact cleaning, lens cleaning, inspection of various operations)
Accessories: remote control, instruction manual, power cord, spike, spike holder
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/8 sales price 59,800 yen ※Saran net is out of stock. This is an attractive Victor powered subwoofer with a focus on accurate bass reproduction. The crossover can also be controlled from 40 to 120 Hz, and it is also possible to adjust the optimal sound to suit your preferences. There are thin threads on the exterior. Serial 094W0070 (Fujisawa Yukishi)
Maintenance information: 2024.3.8 operation confirmed
Accessories: power cord
Main specifications: sealed 30cm cone 88dB playback band 16 to 250 Hz maximum output 600 W W390 x H390 x D445 mm 25 kg
The price has been reduced. 2024/3/15 sales price 69,800 yen Maintained! 50Hz specification * Rotation is slightly fast, but this is the current situation due to product limitations (this is a level you can't understand when playing music) A rare vintage turntable that uses a belt drive system. An ultra-low speed 16-pole hysteresis synchronous motor is mounted as the drive motor, and a TP-13 is mounted on the tone arm. In addition to the tasteful design, you can enjoy the supple and mild sound typical of Torrens. There are scratches and line marks on the exterior. Serial 09070 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (belt replaced. Power cord and phono cable replacement Clean the motor and lubricate all parts. Arm elevation cylinder cleaning grease application. (Since there is no rotation synchronous motor adjustment, it flows slightly)
Accessories: instruction manual, genuine headshell
Main specifications: 16-pole hysteresis synchronous motor External dimensions: W394 x H125 x D325 mm Weight approx. 6.7 kg
※Since it is for business use, it will be handed over as is. This unit has 4 built-in circuits for converting unbalanced output to balanced output, and 4 circuits for converting balanced input to unbalanced input. In addition, it also functions as an audio distributor that can separate one unbalanced input into multiple balanced outputs using an INPUT LINK switch equipped between each channel. Serial 790070 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: No accessories
Main specifications: UNBALANCED TO BALANCED input RCA pin jack ✕ 4 output XLR type connector ✕ 4 BALANCED TO UNBALANCED input XLR type connector ✕ 4 output RCA pin jack ✕ 4 size W482 ✕ H48 ✕ D196mm weight 2.8 kg
A heavy TARGET AUDIO stand. It is a manufacturer with many expensive products, but it is a relatively reasonable model. It's 71 cm tall, so if you're looking for a small bookshelf, take this opportunity. (Miura Kimiya)
Accessories: No accessories
Main specifications: height 710 mm top plate W187 x D157 mm base plate W250 x D 305 mm weight 6.8 kg
※It is inexpensive because it is in poor condition, such as rust. Set of 4 high-carbon cast iron stands with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has rust spots, dirt, etc. (Tamura Eiji)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
Set of 2 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. There are scratches, dullness, etc. on the exterior. There is no felt (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
Everything from unit and network overhauls to exterior maintenance has been completely refreshed! This is a Lancaster equipped with a 12 inch monitor GOLD. The small feel of the high-efficiency 12-inch unit and the hole tone that sounds throughout the box are unique to this model. It sounds one size smaller than RECTANGLAR, and is compatible with tube amplifiers. There are some repair marks left, but the finish is beautiful. (FUJISAWA KOSHI)
Maintenance information: 2024.3.28 maintained (exterior repair/polishing/clear finish, rear baffle repair/painting, saran net cleaning/repasting, sound-absorbing material detachable, unit maintenance: magnetic circuit gap cleaning/center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, ATT cleaning, terminal mounting processing)
Accessories: No accessories
Main specifications: 2 way, 1 speaker, bass reflex system, floor type, 12inch coaxial 2-way (MONITOR GOLD) frequency band 25 to 20,000 Hz minimum resonance frequency 20 Hz maximum input 30 W output sound pressure level 90.5 dB 8 Ω W535 × H840 × D320 mm 28.45 kg
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
※Since it is for business use, it will be handed over as is. 192 kHz/24 bit compatible D/A, A/D converter. Sound output up to 192 kHz has been confirmed with all 8 channels of digital inputs. Other analog inputs confirmed digital conversion to 44.1/48/88.2/96/176.4/192 kHz for all 8 channels. Clock input is also supported. The sound was detailed and plump, and the sound quality was close to Apogee Digital. As for the exterior, there is a scratch on the top plate (Tamura Eiji)
Maintenance information: 2024.3.8 operation confirmed
Accessories: power cable
Main specifications: sampling rate 44.1 to 192 khz, W490 x H90 x D300 mm, weight 5.5 kg
The price has been drastically reduced! 2024/3/8 sales price 99,800 yen Maintained! AC120V specification. The low frequency response is good, there is plenty of room above the housing, and I definitely want to listen closely to the mid to high frequencies. It is a power amplifier with an output stage configured using the TL (transconductance linearization) circuit system, which is patented by the company using MOS-FET. BTL connection is possible, and it can be used as a 400W monaural amplifier. The exterior has bumps, scratches, etc. Serial 3200716 (Fujisawa Yukishi)
Maintenance information: 2024.3.8 Maintained (all internal checks. C, R, TR, FET, etc. are OK. Operation test)
Accessories: power cable
Main Specifications: 120W+120W (8Ω) 200W+200W (4Ω) Input Impedance: 47kΩ Damping Factor: 500 W480 x H140 x D300 mm 14.0 kg
The price has been reduced! 2024/3/7 sales price 79,800 yen Maintained! 120V specification SUMO control amplifier hosted by amplifier design genius James Bongiorno. Compared to amplifiers from the GAS era, the sound is cleaner, but the elastic low frequency bounce method is still alive and well. It is one that uses toroidal transformers and high quality parts, and makes you feel that they are particular about it. On the exterior, abrasions and line scratches are conspicuous on the top plate. Serial H (Yonejima Satoshi)
Maintenance information: 2024.3.25 Maintained (Earth float re-fixed. (*Since AC120 is specified, a hum may occur at 100V.)
2024.3.7 Maintained (internal inspection check, PHONO changeover SW, INPUT/TAPE changeover SW cleaning. Transistors, resistors, and capacitors can be checked. Operation check)
Accessories: No accessories
Main specifications: 6 inputs, 2 PRE OUT terminals, W480 x H40 x D220 mm, weight 8.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/22 sales price 168,000 yen Maintained! UK Spendall bookshelf speakers. It has a fresh and cohesive expression, and has an elegant sound typical of being made in England. It's a natural, well-balanced sound that you can't imagine from this size. There are no noticeable scratches on the exterior. Serial 223E11345, 223E11346 (Sato Wataru)
Maintenance information: 2024.3.22 Maintained (separate and disassemble the magnetic circuit and vibration system of the single-sided woofer. Removes iron powder etc. from magnetic circuit slits and prevents corrosion. Cone adhesive peeling repair, coil deformation, round out A vibration system is incorporated into the magnetic circuit to adjust centering. (Enter a sine wave and check that there is no vibration or distortion)
Accessories: saran net, jumper plate
Main specifications: bass reflex input 80W sound pressure 88dB impedance 8Ω crossover frequency 4kHz frequency characteristics 60-20kHz W220 x H400 x D280 mm weight 9.5 kg
This model is specialized for 3009S2 light needle pressure and has narrowed down applications. The sharpened, sharp followability is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. Serial 182902 (Fujisawa Yukishi)
Maintenance information: 2024.3.1 continuity confirmed
Accessories: phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g
The price has been drastically reduced! 2024/3/22 sales price 248,000 yen The initial main weight split type has been revived with genuine maintenance by Rizaye! It is a popular model with a full range of cartridges that can be used. In addition to the glossy, smooth tone due to the metal knife edge, it is a famous machine that boasts deep chiseled sound quality. An earth cable is not attached, but it is an original specification that diverts the ground with Rch-. The main weight is a large type
Maintenance information: 2023.5.17 maintenance (main unit disassembly check and cleaning, bed plate grommets x 4 replacement, inspection and adjustment of each part, and operation check)
Accessories: instruction manual (copy), dedicated cable
Main specifications: statically balanced needle pressure 0 to 5 g, cartridge weight 1.5 to 26 g
※Since the screw fixing part is missing, it is inexpensive. The needle tip is JICO/VN45HE. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The stylus is moving slightly to the left (Tamura Eiji)
Maintenance information: 2023.12.26 operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
The price has been drastically reduced. 2024/3/14 sales price 99,800 yen SENNHEISER's first balanced headphone amplifier. It is equipped with a high-quality D/A converter and a convenient function that can easily adjust input gain, contributing to accurate sound transmission unique to high-end machines. There are no noticeable scratches on the exterior. Serial 1085105159 (Tamura Eiji)
Maintenance information: 2024.3.14 Maintained (4 volume removal, disassembly, cleaning, and reassembly. Voice check for each input and output is OK. (The balanced headphone output is ① L-HOT ② L-COLD ③ R-HOT ④ R-COLD)
Accessories: instruction manual, original box
Main specifications: frequency characteristics 10 Hz to 100 kHz dynamic range 115 dB digital input: 4 systems (USB, coaxial, AES/EBU, S/PDIF optical) analog input: 2 systems (unbalanced) analog output: 1 system (balanced) headphone output: 4 systems (XLR-4:2 systems, 6.3 mm standard: 2 systems) compatible impedance 16 to 600 ohms W224 x H44 x D306 mm body weight approx. 2250 g
The price has been reduced! 2024/3/20 sales price 59,800 yen has been maintained! This is a Sansui CD player with impressive audible sound that is both sound and resolution. The D/A conversion unit is equipped with NEWL.D.C.S, a 1-bit D/A conversion system based on crystal oscillation. The board with the side panel is broken, and there are other small scratches and a feeling of use. Serial 609080871 (Fujisawa Yukishi)
Maintenance information: 2024.3.20 Maintained (repair of the mechanical part of the traverse mechanism Assy. Create connection cable connectors. (Replace all front panel operation switches)
Accessories: No accessories
Main specifications: frequency characteristics DC to 20 kHz SNR 105 dB or more W466 x H127 x D397 mm 11 kg
Maintained! Following the technology at the time of development of the advanced C-2302, a balanced configuration was adopted for the advanced α-X circuit and power supply unit. The sense of strength and driving power of the highest class as a premain is attractive. The exterior has a feeling of use over time, with dullness and small scratches scattered around. ※The side panel has been repaired with veneer, but there are floats and cracks. Serial 622093718 (Yonejima Satoshi)
Maintenance information: 2024.3.24 Maintained (Mayi amplifier circuit transistor, diode replacement. Adjust volume, replace output relay. Hendphone relay replacement. Power supply transistor replacement. Disassemble the input selector and other switches and apply polishing grease (turnover, tone, muting, loudness, subsonic, processor, MM/MC switching, power amplifier direct, source direct, reck-out, tape). Solder repair. Each volume, switch cleaning. Internal inspection and cleaning. Mounting screw rust remover. Bias, DC adjustment, operation confirmation. Decorative panel repair. (Adhesive repair with bond G17)
Accessories: copy of instruction manual
Main specifications: 160W+160W (8Ω) 190W+190W (6Ω) phono equipped with advanced α-x balance circuit (MM/MC switching) dimensions W460 x H161 x D446 mm weight 33 kg
Maintained. The 707 series plays a central role in Sansui. The PHONO2 system is compatible with MM/MC on both sides, and since it is compatible with all MC cartridges, it is a great product that can switch between 2 levels of impedance: low and high. This is an amplifier I definitely want you to listen to records to your heart's content. The exterior has dullness, scratches, and dirt. Serial 823050972 (Tamura Eiji)
Maintenance information: 2024.3.10 maintained (input selector, reck-out, tone switch disassembly, polishing grease application, master volume replacement, output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, power supply floating resistor replacement, solder repair, each volume, switch cleaning, pin jack polishing, interior and exterior inspection and cleaning, offset, bias (Adjust, check operation)
Accessories: No accessories
Main specifications: 110W+110W size W460 x H160 x D404 mm weight 15 kg
The 1.0m pair of XLR cable terminals is an inexpensive yet cost-effective cable made by Neutrik. It's a powerful linear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0 m BNC to RCA specification high quality eco-friendly material sheath is used for the digital cable, and OFC is used as the conductor. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Exclusive resonance with fine-tuned tuning for the 1.0m Z-DTC01W digital RCA cable
Chip Connect is standard equipment. Highly fresh sound can be obtained by virtual direct connection of contacts. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
※Since it is cheap, it will be handed over as is. 1 bottle only 25cm full range speaker made by RCA in the USA. The Alnico magnet responds well and the sound is easy to remove. There are repair marks on the edge (Tamura Eiji)
Maintenance information: 2024.3.22 sweep test good
Accessories: No accessories
Key Specifications: Unit Diameter 25cm 8Ω Fixed Edge
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Yonejima Satoshi)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
The disposal price has been reduced! (Member prices are not applicable) 2024/3/1 sales price 448,000 yen Internal overhauls such as capacitor replacement have been completed! 220V Quad vintage pre-power system with 100-220V step-up transformer The thickness, luster, and tension of the sound are all emotionally composed, and perfectly express the sound of the instrument. Anyway, it has thick, firm mid-bass, and the tasteful sound unique to vacuum tubes is impressive. The exterior has dullness, stains, scratches, etc. Serial 45808/26904/25186 (Tamura Eiji)
Maintenance information: 2023.12.27 Maintained (power transformer rewound repair. Common resistance: 3 W and 1 W deterioration replacements x 2 QUAD22 switch cover added and 2 deteriorated replacements. Replace 3 block capacitors with 22 μF electrolytic capacitors. Replace 2 Mylar capacitors with 5600 pF deterioration. Balance volume exchange. 6 1W resistors and 1/2W deterioration replacements CD input countermeasure → 4 additional 1/2W resistors for Radio1 only. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 220V (measured at rated output 25W SP: 8Ω)
Accessories: copy of instruction manual, power cable, 220V step-up transformer
Main specifications: [QUAD22] EF86 × 2 ECC83 × 2 input PHONO, RADIO, TAPE W267 × H89 × D148 mm 3.2 kg [QUAD2] KT66 × 4 EF86 × 2 GZ32 15W+15W W321 × H162 × D119 mm 8.2 kg/unit
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 62226 (Yonejima Satoshi)
Maintenance Information: 2024.3.25 Maintained (INPUT DIN 4P replacement, internal Tr, C, R all checks. DIN4P-RCA female cable created. Operation check, pattern solder processing)
Accessories: power cable, connection cable
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
We've reduced the price! 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. Internal all-check, Lch power stage Tr x 3 large leak DC cut C, gain setting C off → replace. (No AC line fuse, installation, operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji)
Maintenance information: 2024.3.6 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! (Member prices do not apply) 2024/1/29 sales price 79,800 yen Maintained in 2023! A tube control amplifier using a CR non-feedback type equalizer section by PROFACT in Hokkaido. You can enjoy straight, realistic sound with a simple circuit configuration that omits tone control. There is a thick line scratch on the bottom of the front panel (Fujisawa Yukishi)
Maintenance information: 2023.4.13 maintenance (selector switch, TAPE monitor switch, disassembly contact polishing grease application. Volume check. (Check the operation of each input/output)
Accessories: power cord
Main specifications: use vacuum tube E88CC x 3 input PHONO2 system, LINE 2 system W480 x H105 x D300 mm 8.0 kg
※1 bottle only. Currently sold. A full range of 8cm high grade glass cloth cones. It has a light, unobtrusive sound and is recommended for pop music and female vocals. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.2.17 sweep test good
Accessories: No accessories
Main specifications: 6Ω 84dB 20W 0.54 kg