Mount an SME Series V to a Michell Engineering belt drive analog player. First of all, I'm drawn to this visual! Even though it's progressive, the design feels somewhat calm. The mechanism uses a floating 3-point support suspension and high-precision ball bearings that enable pinpoint contact to prevent vibration. In terms of sound quality, the precision that comes from SeriesV's tracing skills are well combined with a stable sound field expression with a good sense of connection. In addition to white rust on the exterior and arms, you can also see a feeling of use such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: instruction manual, original box, SeriesV instruction manual, original box
Main specifications: SME SerirSV: tapered magnesium arm, dynamic balance type, effective length 233.2 mm, needle pressure range 0 to 3 g, gyrodec: belt drive, 33/45 rotation compatible, W535 x H185 x D410 mm, 15.5 kg
Maintained! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to a thick, analog-like sound quality that comes out well. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 21120262 (Jun Tamai)
Maintenance information: 2024.5.19 Maintained (motor bearing oil replacement deteriorated parts (electrolytic capacitor semi-fixed resistance rectifier diode) replacement tone arm disassembly/shaft bearing replacement lifter disassembly/grease up speed switching SW rotation fine adjustment volume disassembly/contact polish since the insulator has deteriorated, replaced with a replacement product turntable rotation speed confirmation arm operation needle pressure confirmation exterior cleaning sound output test (Other operation confirmation dust cover newly created)
Accessories: instruction manual overhang gauge
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
Digital RCA Cable 1.0m is a high quality coaxial cable compatible with HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Maintained in September 2020! The highest-grade cassette deck equipped with dbx. The power supply unit and amplifier section have been thoroughly strengthened, and the sound quality as a cassette deck has been further enhanced. The impression is that the sound is clean without exaggerating too much. The exterior is dull and has a feeling of use. Serial 20415-07903 (Tomonori Asaine)
Maintenance information: 2020.9.28 maintenance implementation (capstan belt replacement and tape speed check, head base drive belt replacement, pinch roller detachment inspection cleaning and tape running check, operation key tact switch replacement x11, tape selector switch contact cleaning procedure, pattern correction and replacement due to C48/47 electrolytic capacitor installation failure, power cord replacement, playback level adjustment are high (Since it is folded, it is readjusted to a normal value and the recording level is adjusted, the recording test using the music source is good, Dolby recording, and the DBX recording and playback operation is good)
*Reference value: W&F (WTD) for self-recording and playback: 0.05% is good, but depends on the tape used.
*You may hear a slight squeaking sound from near the panel of this unit. Please note that this is a driving sound caused by pulses for lighting generated from the display tube (FL tube), but it cannot be removed.
Accessories: none
Main specifications: 3 head frequency characteristics 20Hz to 21kHz W475 x H112 x D353 mm 7.3 kg
Maintained by the manufacturer! It is inexpensive because it has 230V specifications. Please use the included step-up transformer. The sound with a firm outline and no hesitation is unique to VRDS. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained by the manufacturer (The function switch has been replaced. Gears and belts have been replaced. Each part has been inspected and adjusted)
Accessories: remote control, manual, power cable, original box, step-up transformer, insulator
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
The price has been reduced! 2023/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
Maintained by the manufacturer! The second generation model in the popular S10 series. It uses traditional ALPHA processing and the company's own Lambda S.L.C. A CD-only model that is still popular today for its vivid mid-high range and rich low range. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 7061502031 (Yamato Yuki)
Maintenance information: 2024.5.17 Maintained (tray washing loading belt, tray opening/closing SW replacement)
Accessories: instruction manual remote control
Main specifications: ALPHA processor, 20-bit current addition type DAC with digital input/output, W434 x H135 x D350 mm, 14 kg
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches, line marks, etc. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
Digital cable, 1.0 m, 110 ohm, AES/EBU standard, a combination of reliable Belden and Neutrik. The high cost performance is outstanding. (FUJISAWA KOSHI)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: No accessories
The 0.5m digital RCA cable terminal is a high quality coaxial cable compatible with REAN (NEUTRIK) HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Maintained! A mid-tier ES series player at the time. It is a CD player with clear sound quality with well-defined outlines typical of Sony. The sound is natural and calm with a sense of stability, so you can enjoy highly flexible sound quality that can be incorporated into various systems. (GOTO Daiki)
Maintenance information: 2024.2.13 Maintained (The belt for opening and closing the tray was replaced after mechanical disassembly due to deformation and deterioration. We cleaned servo mechanisms that were stuck with deteriorated grease and oil, refilled oil, cleaned optical lenses, etc. Output VR organic solvent cleaning and olefin oil coating treatment were performed.)
Accessories: none
Main specifications: CD player equipped with a high-density linear converter system, frequency characteristics 2 Hz to 20 kHz, W470 x H125 x D375 mm, 12.5 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Maintained by the manufacturer! The 3rd generation model of the S10 series. Equipped with AL24 Processing, an analog waveform reproduction technology. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Yamato Yuki)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations, but if it breaks down in the future, pickups cannot be obtained. Loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
Maintained including the creation of a new dust cover! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
The price has been reduced! 2024/3/4 sales price 59,800 yen ※The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. Scratch marks and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
The 2.1 m pair end of the speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. The exterior is dirty and dull, and you can see the feeling of use such as magic writing (Tamai Jun)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.6 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.5 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.4 meter pairs of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 0.95m pair end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with an unprocessed speaker cable with an 0.8 meter pair end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with an unprocessed speaker cable with an 0.8 meter pair end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable is a standard cable that has become synonymous with an unprocessed speaker cable with only one 1.4 meter end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.3 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.3 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
※This is the successor model to the MK2, which uses a unique design that combines several untreated stranded wires at the 4.9m end to form a single wire with only 1 speaker cable. Another feature is that the cable is flexible and easy to handle. There is stickiness and dirt on the sheath due to aging (Tamai Jun)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/5/5 sales price 9,800 yen. ※1 bottle only. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. There is a feeling of use such as peeling and scratching on the label (Mizushima Itsuro)
Maintenance information: 2023.5.5 operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
Speaker cable A standard cable that has become synonymous with 1.0 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.3.30 Continuity confirmed
Accessories: none
※1 bottle only. Speaker cable 2.0m is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and features a tight sound (Murakoshi Yoichi)
Maintenance information: 2024.3.29 continuity confirmed
Accessories: none
※A standard cable with only 1 speaker cable that has become synonymous with 2.0m end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (The mechanical fixing parts were manufactured and replaced in 1 pair. The clamper and loading belt have been replaced. The velocity coil has been repaired and corrected. (The tact switch on the operation panel has been replaced)
Accessories: remote control
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
Maintained! Even though it was an entry-class CD player at the time, I felt that it was well-made. You can enjoy clear, tight low range and high frequency sound with good visibility. Many abrasions can be seen on the exterior and sides, and there are also small scratches, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.10.30 Maintenance completed (servo mechanical disassembly, rail, pickup oilless metal rust removal polishing. Tray drive belt replacement. Optical lens cleaning (Output VR cleaning)
Accessories: remote control, copy of instruction manual
Main specifications: center mechanical mount system D/A conversion method advanced H.D.L.C advanced pulse D/A converter score digital filter W430 x H125 x D375 mm 12 kg
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi)
Accessories: screws
※Shipping service. Special Feature: Jazz 50s/50s New York Staying Diary/50s Jazz Vocals' True Playback of 50s/50s Original Mono Reproductions /50s Label Activity Catalog
※Shipping service. Special Feature: Enjoy jazz 100 times/What is a true record belt/Are the Japanese liner notes poor? /Is the original edition really great
※Shipping service. Special Feature: Jazz 50s/50s New York Staying Diary/50s Jazz Vocals' 50s/50s Original Mono Reproductions; 50s Label Activity Catalogue; S61.6.20 Published.
Output transparent pair for push-pull output 40W primary: 8kΩ secondary: 4-8-16 ohms W83 x H104 x D78 mm 2.3 kg/piece with original box (no label on one side) There are scuffs and line scratches in places (Kojima Yosuke)
Accessories: original box
The price has been reduced. 2023/9/6 sales price 1,000 yen. J1 Project hybrid spike base. Only 1 of the 3-piece set is unopened (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: label
Main specifications: hybrid spike base polymer composite FAR561+ stainless steel saucer diameter 35 mm x height 15 mm maximum load weight 174 kg