*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior and scratches on the back (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Based on the CS-1000, it is a model that promotes high sound quality and weight reduction. The duralumin machined body and Diamond Like Carbon treatment achieve both a sense of luxury and rigidity (Daiki Goto)
Maintenance information: 2024.6.5 continuity confirmed
Accessories: original box, instruction manual, screws
Main specifications: dead weight 13.7 g
SAEC ceramic shell A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. There is a cloudy part (Daiki Goto)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A model that inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. There is a light thread on the top of the exterior. Serial 13466 13432 (Murakoshi Yoichi)
Maintenance information: 2024.6.6 sound output confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
Maintained! The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Comes with an easy to handle 5-band equalizer. An easy-to-use preamp that can be combined with speakers and power amplifiers of all ages. There is a slight feeling of use such as scratches on the top plate. Serial AY3749 (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 maintenance (TR in the EX Pander board, Tr replacement in the headphone board, operation check, connector caulking cleaning, solder processing) maintained (flat cable replacement, each SW and 2023.3.30 and VOL cleaning, RCA cleaning ※ internal capacitor, lamp, cable replacement (made by another company) IC replacement operation check gap cannot be completely removed) 2022.9.29 Maintained (switch, volume contact cleaning, flat cable replacement, electrolytic capacitor replacement, panel lamp replacement, power circuit tap change, 100V specification change, each input/output operation check)
Accessories: instruction manual (copy)
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
Maintained by the manufacturer! Accuphase CD player. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. There are many line marks, other small scratches, and a feeling of use on the top surface. Serial D0Y305 (Murakoshi Yoichi)
Maintenance information: 2024.6.4 manufacturer maintenance (tray opening/closing belt set and buffer spacer, operation switch, phase and capacitor replacement. Disassembly and cleaning of the loading mechanism. Operation, characteristic tests, aging tests, readjustment of parts, interior and exterior cleaning, insulation, and safety tests)
Accessories: remote control, instruction manual (copy)
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
Maintained by the manufacturer! This mono power amplifier was developed as the first full-scale high-output power amplifier for consumer use. The sound quality is unique to Accuphase, which has high power and is full of subtlety. Equipped with a digital meter that instantaneously calculates real power. By switching between modes, it is easy to drive even ultra-low impedance speakers. There is a feeling of wear on the exterior such as scratches. E1X029 E1X030 (Jun Tamai)
Maintenance information: 2024.6.6 Accuphase maintained (relay contacts replaced due to deterioration, all switches, volume, reworked due to contact cleaning, parts replaced due to stress deterioration, safety confirmation, pressure resistance test, operation characteristics check, each readjusted cleaning pair, similar treatment for matching characteristics)
Accessories: original box
Main specifications: 800W+800W (8Ω) W481 x H239 x D489 mm 47.2 kg
Full maintenance was carried out to replace all deteriorated parts such as capacitors and vacuum tubes! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has a beautiful finish due to exterior maintenance, but rust etc. on the back remain. Serial 101 20007 (Tomoho Asaine)
Maintenance information: 2024.6.6 maintained (parts replacement, input/output waveform check, load test (1kHz sine wave, 8Ω load: 30W+30W, OK), sound output test) 2020.4.2 maintained (vacuum tube (50CA10), electrolytic capacitor, block electrolytic capacitor, coupling capacitor, vacuum tube socket, headphone jack, micro switch, rectifier diode, semi-fixed resistor, fuse replacement. Complete disassembly of SW/VOL contacts, polish, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 30W+30W), distortion adjustment (maximum output: 0.2%), sound output test)
Accessories: manual copy power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tonearm. Dust coverless specification. The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
It is a grace shell characterized by a fin shape. Lightweight yet hard, highly rigid shell (Asaine Tomoho)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber dead weight 10.7g
High output type. You can easily enjoy the delicate sound of MC cartridges without a step-up transformer. The thick mid-range, and the instantaneous, and light sound is attractive. Serial 4875 (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box
Main specifications: high output MC type, output voltage 1.6 mV, needle pressure 1.5 to 2.1 g, playback frequency band 20 to 45,000 Hz, load resistance 47 kΩ or more, internal impedance 160 Ω, needle tip 0.1 x 0.2 mm square solid, special elliptical needle, dead weight 4.8 g
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
Maintained! An FM masterpiece arm made in Japan made with a high level of stainless steel and workmanship accuracy. The clear, thick tone that doesn't make you feel incidental sounds is excellent, and the breadth and ease of settings, and the excellent firm and excellent tracing ability in the dynamic balance type are excellent (Oikawa Tetsuji)
Maintenance information: 2024.6.5 Maintained (We will disassemble the arm needle pressure application mechanism part and clean it. The arm lifter skate rubber was replaced due to deterioration. Operation tests with cartridge mounting were also good)
Accessories: phono cable, instruction manual
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
※Since it is cheap, it will be handed over as is. The design is reminiscent of the Technics SL-1200 series, but I recommend this model for those who want to enjoy functionality and a little bit of fun on their own. It can be used by a wide range of people, from beginners to DJs. The exterior is dull and there are small scratches on the dust cover. Serial C410000041 (Kimiya Yonejima)
Maintenance information: 2024.6.5 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: quartz lock brushless servo motor, rotation speed 33, 45, 78 rpm, arm weight 12 g to 17 g (including headshell) size W450 x H157 x D352 mm weight 11.3 kg
※Since it is cheap, it will be handed over as is. Comes with a remote control. AM/FM stereo tuner with dual-gate MOS FET on the front end. The tone is bright and natural. There are dirt scratches and threads on the exterior. Serial MZ009520050055 (Tamura Eiji)
Maintenance information: 2024.6.5 operation confirmed
Accessories: remote control, instruction manual, AM antenna
Main specifications: AM/FM stereo synthesizer tuner dimensions W428 x H86 x D295 mm weight 3.2 kg
2024.4 Maintained! Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a higher frequency extension than the A730, and the overall balance from bass to treble is good, and the sound has a solid sense of sound pressure. There is dullness and small scratches all over the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 Maintained (CD mechanical pickup is movable by checking, dismantling, check assembly → reading OK. All other internal parts of the NG part have been replaced. CD disc plate replacement ~ aging test 6 days ~)
Accessories: power cord, instruction manual (copy)
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
The 1.2m pair of unprocessed speaker cable has excellent balance from low to high frequencies, and has an energetic and warm tone. There are threads and disappearing characters on the exterior (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: No accessories
※The power supply has been converted to a glasses inlet. Maintained! Head amplifier for Luxman MC cartridges. This head amplifier has no corners and is characterized by a smooth, sit-down sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (GAIN switch disassembly contact polishing, contact grease application after eyelet correction. Transistor replacement for each circuit (DC amplifier, MUTING, power supply). (Running test)
Accessories: power cable
Main specifications: MC type cartridge head amplifier with PASS input impedance/100Ω 20dB/30dB switching W138 x H78 x D305 mm 2.7 kg
The price has been reduced! 2023/5/5 sales price 29800 yen*Currently sold. Woofer edge softening treatment. A model developed with an eye on the digital age. The natural spread of sound is suitable not only for vocals, but also for classical music, etc. This is a volume-input high CP model unique to the bubble period. The exterior has a saran net hole, and the emblem is missing on one side and the other side is missing. Also, the veneer is torn. Serial 2609/12502 (Yonejima Satoshi)
Maintenance information: 2024.5.5 maintained (woofer edge softening treatment, good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed, 32 cm for the low range, 10 cm, cone type/2.5 cm for the high range, dome type frequency band 35 Hz to 30 kHz crossover 600 Hz/5 kHz sound pressure level 91 dB impedance 6 Ω dimensions W370 x H680 x D330 mm weight 21 kg/book
Maintained by the manufacturer! Remote control is missing. The highest-end model of Denon's integrated CD player. The relaxed low range makes you feel analog sound quality. The operation of loading a stabilizer with a strong sense of weight is unique to top loading. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 6031501867 (Hiroki Aso)
Maintenance information: 2024.6.4 maintained (tray opening/closing SW disassembly, contact cleaning laser pickup RF level check (however, repairs will not be possible if sound skips in the future or failure such as not reading TOC due to the disc), inspection of each part, operation test)
Accessories: instruction manual stabilizer original box
Main specifications: 2 analog outputs, 3 digital outputs, 2 digital inputs, W434 x H164.5 x D395 mm, 20 kg
Set of 24 Amazon Basic banana plug It can be connected, making it convenient when adding tweeters, etc. If you've been looking for one, go ahead. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
This is PLATANUS MC type phono cartridge. The connection from deep bass to high frequencies is good, and the playback ability is delicate and has a sense of density. You can honestly feel the vivid, dynamic sounds, and even the performer's emotions, and the records you've listened to over and over again until now will play richer and more beautiful music. Magnetic circuits are precision machined and integrated from large chunks of pure iron to enhance rigidity so that vibration energy from the needle tip to the power generation coil is not damaged. The printing has disappeared, and there are small scratches on the body, but the needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual
Main specifications: Playback frequency 10 to 50,000 Hz impedance 2.5 ohms dead weight 16 g
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: none
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
※It is inexpensive because it leaves cracks in the VOL. A headphone amplifier that allows you to enjoy the sound of 2 systems: a vacuum tube and a transistor. It has a built-in USB DAC compatible with 24 bit 96 kHz, and it is a blissful item that allows you to immerse yourself in both digital and analog worlds to your heart's content. Scratches on the transformer area are slightly noticeable. Serial 12060066 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed (sound output OK, gaps remain in VOL)
Accessories: instruction manual, power cord
Main specifications: Vacuum tube using a class single headphone amplifier 6BM8 x 2 vacuum tube output 20Ω to 600Ω (45mW to 135mW) transistor output 12Ω to 300Ω (40mW to 135mW) frequency characteristics 10Hz to 50,000 Hz SNR 89dB power consumption 30W size W190 x H150 x D250 mm mass 4.7 kg
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
Active speakers in the “Formation Suite” series of wireless audio compatible with high-resolution transmission. One unit is powered by a 125W digital amplifier. It features a high-quality sound that casually expresses a sense of dynamism when the sound starts up. It is a system that is likely to become a new listening style in the future, as it can also support network playback using Roon without using a separate amplifier (Kojima Yosuke)
Main specifications: 2-way active speaker output 125W x 2 Wi-Fi, AirPlay 2, Spotify Connect, Roon Ready compatible Bluetooth version: 4.1 Bluetooth compatible codecs: SBC, AAC, aptX HD W197 x H395 x D305 mm 10.6 kg/unit
The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. There are threads and small scratches (Daiki Goto)
Maintenance information: 2024.6.2 maintained (maintenance contents/TONE and other subsonic, loudness, processor, muting, source direct, power amplifier direct, input selector, tape switch disassembly, polishing grease application, output relay replacement, protector capacitor replacement, each volume, switch cleaning, pin jack polishing, internal inspection and cleaning, running test.)
Accessories: copy of the manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
Beautiful item with original box! An introductory model of an MC cartridge equipped with an oval needle bonded to an aluminum cantilever. It features delicate, clear, and highly transparent expressions. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: Playback frequency range 20 to 30,000 Hz output voltage 0.32 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 ohms recommended load resistance 100 ohms or more (when connected to a head amplifier) stylus joint oval needle aluminum pipe cantilever mass 7.6 g
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
Beautiful item with original box! The MK2 CLUB from the Concorde series with an integrated headshell, is a staple of DJ play, and is now in stock for the first time at Hi-Fi. It is clear and stands out for its wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main Specifications: Output voltage: 8mV Channel separation: 25dB (@1kHz) Frequency band (at -3dB): 20-20,000 Hz Stylus: Special Elliptical Appropriate Needle Pressure: 3g Dead Weight: 18.5g
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg