Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2024.6.7 sound output confirmed
2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, slip stud installation, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/application of dumping agent, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removes aluminum seals that do not require unit detachment Treatment to prevent idling, re-fix the unfixed coils inside the treatment with silicon ATT contact cleaning. An exchange frequency characteristic measurement check (~ 42 kHz) is performed because the wiring is broken at the base of the resistor, and the original capacitor is continuously used to confirm the input/output waveform and balance for good results, check the sound output)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
Brand new, unopened BOSE TV SPEAKER You can easily improve the sound quality of your TV (Daiki Goto)
Maintenance information: 2024.6.8 operation confirmed
Accessories: original box
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Maintenance information: 2024.6.8 confirmed
Accessories: none
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. It is a beautiful item with little feeling of use (Mizusaki Ryo)
Maintenance information: 2024.6.8 sound output confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
Maintained! Inheriting the technology of the C-2302Vintage, it is a control amplifier with excellent cost performance. It uses a Teflon board, a phono input compatible with 3 positions, and WBT for input/output terminals, etc., making it a structure unique to SANSUI with no gaps in specification materials or circuit configurations. It has a sharp, clear, and powerful sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (INPUT switch, CARTRIDGE switch, MODE switch, other selector switches x 4 disassembly contact polishing. Master volume cleaning. Reinforced power board solder. (General adjustment)
Accessories: copy of the manual
Main specifications: Phonoico built-in control amplifier, MC/MM compatible, 7 input systems, 3 output systems, W460 x H137 x D383 mm, 16.5 kg
A compact and convenient receiver. With a configuration of SACD/CD player+FM/AM radio+PHONO terminal (with MM/MC compatible phono equalizer), you can easily build a compact, and good-sounding system. You can see a feeling of use, such as the exterior, dullness, and noticeable scuffs on the sides (Kobayashi Hitoshi)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control, power cord
Main specifications: rated output 37.5W+37.5W compatible speaker impedance 4Ω to 16Ω frequency characteristics 10Hz to 40kHz W300 x H110 x D341 mm 8 kg
※The vertical stand is missing, and there are many small scratches, so it is cheap, and it is currently sold. Stand is missing. The company's first standalone USB-DAC and headphone amplifier that is also compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. In addition to the exterior and tape marks, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: AC adapter
Main specifications: DSD signal sampling frequency 2.8224, 5.6448 MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
A popular model of electric voice equipped with a 46cm woofer. There are 4 bass reflex ports around the woofer, but that wasn't enough, and the midbass also has 1, creating a low frequency with good clarity. Coupled with a mild mid-range and thick high frequencies, it is a speaker that has the flexibility and richness of European sound while having a dynamic structure. Serial S111556 S112448 (Murakoshi Yoichi)
Maintenance information: 2022.6.23 maintained (exterior cleaning, scratching, dent repair, stain area touch up saran net simple cleaning)
2018.7.6 Maintained (Exterior Cleaning Touch Repair Saran Net Replacement Woofer, Mid and Edge Replacement Driver Magnetic Circuit Slit Cleaning Center Adjustment Diaphragm Cleaning Contact Cleaning Network Input Terminal Rust Removal Cleaning Reinforcement Screw Fastener Application BI-AMP Switching Plug Cleaning ATT (SW Type) Cleaning Input/Output Waveform and Balance Check, Sound Output Check frequency characteristics measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used for good results)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex floor type woofer 46cm cone type scoker 30cm cone tweeter horn type crossover frequency frequency 250 Hz, 1.5 kHz playback frequency band 40 to 20000 Hz 6 Ω 95dB W64.2 x H119.3 x D45.0 cm 63.0 kg
*Currently sold. A speaker that can be easily used for multiple purposes, such as for subsystems and AV. It has a gentle and elegant European taste that is more textured than the price. The exterior has a feeling of use such as dullness, small scratches, and partial tears in the saran net. Serial 4067104884 4067104884 (Asaine Tomoho)
Maintenance information: 2024.6.8 sound output confirmed
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf type output sound pressure level 89dB impedance 6Ω dimensions W190 x H322 x D256 mm weight 5.2 kg
The price has been reduced. 2024/5/24 sales price 35,000 yen Tannoy rectangular yoke type enclosure by Shinkosha, a popular manufacturer of domestic boxes. The construction that sounds good is attractive. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi)
Accessories: none
Main specifications: W597 x H108 x D37 mm weight 30 kg
Refresh yourself with interior and exterior maintenance! A gray-finish model of the king monitor 4343B. The balance between thick, strong mids and responsive bass is perfect. A model that wants to make jazz and rock sound thick, thick, and powerful. It's a lot of exhilarating noises. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.5.27 Maintained (exterior repair/all coated saran frame processing correction repair/net replacement, plate maintenance repair, plate maintenance (edge replacement, cone paper coating, center cap replacement)) midmaintenance (edge replacement, cone paper coating, center cap replacement, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) Tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement, exterior painting) horn painting, diffuser repair/painting, baffle plate cleaning unit detachable network maintenance: frequency characteristic check, ATT cleaning, switching SW/terminal cleaning/screw replacement)
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex crossover 300 Hz/1,250 Hz/9,500 Hz impedance 8 Ω 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/1
The price has been drastically reduced! 2024/6/4 sales price 278,000 yen The tweeter has been replaced with a brand new one at the manufacturer! A masterpiece model of a 2-way bookshelf speaker with excellent clarity and delicate expressiveness. It's a low range that has more volume than it looks, and I'm amazed at the high degree of perfection. There are scratches and scratches on the exterior. Serial 0010357, 0010358 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 manufacturer maintained (both side tweeters replaced with new ones)
Accessories: Jumper cable (general purpose product)
Main specifications: 2-way 2-speaker bass reflex type 88dB 8Ω W238 x H418 x D351 mm 11.5 kg
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound is captivating. The exterior has been beautifully finished due to maintenance. Serial 32547 32298 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 maintenance (exterior repair/cleaning, saran net cleaning, repasting, ATT cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 1,480,000 yen This is a high-end horn system, avant-garde duo. The high efficiency and high speed MID/HI driver is equipped with 2 active woofers. The sound is amazing while keeping the impactful look intact. The beautiful smooth mid-range sound that flows out of a giant trumpet-like horn is particularly wonderful!! Also, although it is a horn system, the smooth connection from bottom to top with no time errors as far as possible is also noteworthy. The exterior is generally good, although there is a slight feeling of use. Serial 09080415 09080416 (Tomoho Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: Saran net power cord, jumper cable x 4
Main specifications: crossover frequency 220 Hz/2,000 Hz 104 dB 8 Ω built-in power amplifier output 250W W670 × H1550 × D680 mm weight 65 kg
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
The price has been reduced! 2024/5/25 sales price 298,000 yen A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
The price has been drastically reduced! 2024/5/31 sales price 128,000 yen Maintained! Hi-Fi is in stock for the first time! Macintosh transistor AM/FM tuner. The reception sensitivity is also good, and you can enjoy deep and warm sound even though it is a transistor. The exterior is scratched and dull. Serial JCR1658 (Jun Tamai)
Maintenance information: 2024.5.31 maintained (varicon cleaning, F cover adjustment, OSC capacity adjustment, windshield peeling correction, each SW and VOL cleaning)
Accessories: none
Main specifications: W405 x H135 x D360 mm weight 8.1 kg
The price has been drastically reduced! 2024/6/3 sales price 148,000 yen Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The exterior has rust, paint peeling, etc. Serial 32769 32799 (Tomonori Asaine)
Maintenance information: 2024.6.3 maintained (diaphragm repair and installation adjustment pad dampener replacement, 18 mounting screws, replacement, distribution terminal, contact part cleaning, terminal cleaning, 8 insulating bushings, replacement, diaphragm cleaning)
Accessories: none
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
The price has been reduced! 2024/6/2 sales price 69,800 yen This is an EV PA speaker. You can enjoy a clean sound with crisp high frequencies and responsive low frequencies. It's made of resin and is lightweight, so it's easy to carry around. It can be used for a wide range of purposes, such as reeds at home and at events. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, 30 cm woofer impedance, 8 ohm, 300 W, 80 to 25,000 Hz, size W430 x H585 x D314 mm (actual measurement), 15.3 kg (actual measurement)
Famous machines from yesteryear have been revived due to the creation of a new Saran Net and internal and external refreshment maintenance! Middle monitor walnut specification. The punchy bass and sharp, smooth mid-range are all very attractive models. In contrast to modern JBL speakers, listening to jazz with a thick mid to low range sound is excellent. Serial 72329/72332 (Murakoshi Yoichi)
Maintenance information: 2024.6.6 maintenance (exterior repair/polishing/oil finish
Front and rear baffle repair/painting, new saran net created. Unit maintenance: woofer cone paper painting/center cap dent repair on one side, mid cone paper coating/center cap dent repair on one side, TW cone paper/frame coating. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: saran net
Main specifications: Way3 speaker front bass reflex type sound pressure level 91 dB impedance 8 ohm crossover frequency 1.5 kHz/6 kHz playback frequency band 45 to 15,000 Hz W362 x H597 x D298 mm 20 kg/book
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound becomes a habit. The exterior is in a beautiful state due to maintenance. Serial 32648 32951 (Yamato Yuki)
Maintenance information: 2024.6.7 operation confirmed
2021.10.15 Maintained (exterior cleaning/repair saran frame painting/net replacement cone paper touchup/tweeter grill dent correction ATT cleaning unit detachable)
2012.1.27 Maintained (ATT replacement, capacitor replacement, input/output waveform and balance check, sound output check, frequency characteristic measurement, front baffle repair (touch-up painting), exterior cleaning, plate attachment (not completely flat because there were already quite a few wrinkles)
Sound output test)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
A new standard model for the SL-1200 series, inheriting the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on both the body and dust cover on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.7 operation confirmed
Accessories: instruction manual, power cord, RCA cable, earth cable, original box, subway, shell
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
DS-E1 is the entry model for optical cartridges. The mechanism captures the movement of the needle as a change in light and outputs it, and reproduces sound quality with excellent separation and high resolution. The exterior is slightly dull on the body*A dedicated equalizer is essential for use (Ryo Mizusaki)
Maintenance information: 2024.6.7 operation confirmed
Accessories: original box, catalog, wrench
Main specifications: DS-E1: aluminum cantilever, machined aluminum body, output voltage of 500 mV or more, needle pressure 1.6 g to 1.8 g, weight 8.1 g
Maintained in March 2024! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. As for the exterior, there is a scratch on the top plate. Serial 611088582 (Tomonori Asane)
Maintenance information: 2024.3.21 maintained (tone and other switches dismantled and polished with grease applied (turnover, subsonic, muting, loudness, processor, input selector, reck-out, power supply direct, source direct, tape, MM/MC changeover switch), power amplifier, power circuit transistor, resistor, adjustment volume, diode replacement, solder repair, each volume, switch Cleaning, output relay, headphone relay replacement, DC, bias adjustment, interior and exterior inspection cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
*There is no problem with operation, but since it is cheap, it is sold as is. A slim, space-saving Bose tall boy speaker. Although it is a slender speaker, it has a very well-balanced sound and is ideal for multi-channel systems, and it is a model that is fully compatible with 2ch playback. There is paint peeling on the base (Oikawa Tetsuji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: none
Main specifications: 2 way 5 speakers, frequency band, 55 Hz to 20 kHz, impedance 8 ohms, maximum allowable input, 60 W, 85 dB, W85 × H1206 × D100 mm, 5.6 kg
DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. Small scratches and threads are scattered on the exterior, lower front, top, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.7 sound output confirmed
Accessories: instruction manual, saran net, spikes, hex wrench
Main specifications: 3 way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The price has been reduced! 2024/5/13 sales price 59,800 yen ※ It is cheap because chips and oxidation are conspicuous in the horn part. A tweeter representing JBL. It gives an expression with a greater sense of depth and expansion than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
The price has been reduced! 2024/4/23 sales price 59,800 yen Manufacturer maintained! The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There is dullness and a feeling of use. Serial 1050502942 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 manufacturer maintained (main volume and selector switch disassembly contact cleaning. (Idle current adjustment, operation inspection implementation)
Accessories: power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible dimensions W434 x H180 x D478 mm weight 22 kg
The price has been drastically reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
The price has been reduced! 2024/6/2 sales price 79,800 yen*Inexpensive because there is unevenness in the display display. A high-resolution USB-DAC, and a DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512). Serial A210J41725016630 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio format AAC · AIF · AIFF · APE · FLAC · M4A (Apple Lossless) ALAC · OGG · WAV · WMA · DSF · DFF maximum sampling frequency PCM192 kHz/24 bit · DSD2.8224 MHz (DSD64) W254 × H76 × D360mm weight 4.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/23 sales price 1,380,000 yen*Woofer saran net is out of stock. Limited edition of 500 units commemorating the 40th anniversary of B&W's founding. Not only are diamond tweeters that reproduce extremely clear, natural high frequencies, but their ability to reproduce low frequencies with a sense of volume is also attractive. The low range is well balanced with the mid to high range, and the localization is clear, and it is expressed with a rich sense of color, especially in classical music. As for the exterior, there is a feeling of use such as a line scratch or dullness on the back. Serial 0002291 0002292 (Asaine Tomoho)
Maintenance information: 2022.12.14 manufacturer maintained (tweeter replacement operation test)
Accessories: spike foot jumper sponge hex wrench
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz 8 ohms crossover frequency 3.8 kHz W230 x H930 x D375 mm 25 kg
The price has been drastically reduced. 2024/6/2 sales price 498,000 yen straight pipes, only lightweight weights are included, and the armrest is an external item, so it's cheap. Maintained! EXCLUSIVE's popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. The exterior is broken in the corner of the dust cover, chipped glass, and finger tips are substitutes, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintenance completed (START, disassembly and cleaning in other buttons, servo circuit electrolytic capacitor replacement, rotation lock position adjustment, arm damping grease cleaning replacement, turntable height adjustment, armrest replacement (structure is different). (Arm operation, voice check)
Accessories: straight pipe, lightweight weight, instruction manual (copy)
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency, 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input, 160 W, W650 x H204 x D314 mm, weight: 14 kg
The price has been reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 79,800 yen ※It is cheap because the color fades due to sunburn on one side. A classic bookshelf speaker with a small yet firm sense of volume and texture that makes a good impression. It reproduces music without choosing a genre. There is a feeling of use on the exterior due to sunburn, small scratches, etc. (Tamai Jun)
Maintenance information: 2024.5.31 sound output confirmed
Accessories: saran net jumper plate
Main specifications: Playback frequency band 45Hz to 50kHz 8Ω W165 × H280 × D260 mm 6.7 kg/1