The 1.5m power cable has a high attenuation rate of weak vibrations, and the sense of distortion is minimal due to the high rigidity, so the impression is that the sound quality is precise and accurate. Try it with a sound source with a large number of instruments, such as classical symphonies. In addition to the exterior and a lot of friction, you can also see a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed
Accessories: none
Main specifications: blade beryllium copper (mirror polish) plating, thick silver plating (1.5 μm) + rhodium plating (0.3 μm) finish, chassis, high rigidity PBT (with 30% glass fiber), cover, high rigidity polycarbonate, completely non-magnetic, 125V/15A specification, PSE certified
Maintained! The 306 series was supported as a pure audio entry model. It has plenty of phono circuits, is MM/MC compatible, and impedance can be adjusted. Clear, high quality sound quality with W super servo system. I feel that the sound quality, which has a slight core, is good in this era. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.22 maintenance completed (mode, recout, input, subsonic, cartridge, phono selector switch disassembly, polishing grease application, replacement of all indicator lamps, solder repair, pin jack polishing, internal inspection and cleaning, each volume, switch cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: PHONO (MM/MC) 2 system frequency characteristics 0.8 Hz to 170 kHz dimensions W480 x H100 x D403 mm weight 10.5 kg
Maintained! This is a 907 series higher class premain amplifier. Not only is the sound thick and wide range, but it is also a deep and majestic sound with a sense of weight. The XR series during this period has particularly horsepower in the mid to low range, and it sounds briskly ROCK and JAZZ. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 maintenance (main amplifier circuit transistor, adjustment volume exchange, output relay, headphone relay replacement, power supply circuit transistor replacement, input selector, etc., and application of polishing grease (power amplifier direct, source direct, reck-out, tape, loudness, subsonic, muting, processor switch), various volume cleaning, soldering (Repair, DC, bias adjustment, internal inspection and cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Equipped with HYPERα-X balance circuit, effective output 190 w+190 w dimensions W466 x H163 x D452 mm, weight 33 kg
Maintained! A system equipped with DENON's highest-model phono motor DP-80 at the time and DA-401 tonearm mounted on a genuine cabinet DK-300. You can enjoy music slowly with stable operation by combining the DP-80, which incorporates plenty of advanced technology from the time, such as a dual-structure turntable and AC servo motors, and the DA-401, which prevents the needle from being violently touched by the influence of record boards by reducing weight. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 118435 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (TR replacement normal/variable SW repair power capacitor replacement speed adjustment sound output test)
Accessories: copy of the dedicated shell instruction manual
Main specifications: DP-80 quartz lock direct drive outer rotor 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, DK300 dimensions W550 x H190 x D470 mm, DA401 static balance type, effective length 244 mm, needle pressure range 0 to 2 g, total weight approx. 24 kg
The 3rd generation model of the S10 series. Equipped with analog waveform reproduction technology AL24 Processing. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Hiroki Aso)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations; if it breaks down in the future, pickups cannot be obtained loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
Air-tight KT88 push-pull The modern sound, which combines the soft texture unique to vacuum tubes and the high resolution, is attractive. There are 2 inputs at the front and rear, and the front input can be directly connected to the first stage tube without going through a shielded wire. The front panel is equipped with a meter that can check the optimal operating point of the output tube. There are many scratches on the bottom plate, and there are paint chips, threads, and bumps on the transformer (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: used vacuum tube KT88 x 4, ECC83 x 2, 5814A x 2, 12BH7A x 2, 12BH7A x 2, 80W+80W 8Ω, W415 x H223 x D380 mm, 32 kg
※ It can be used without problems, but since future repairs are not possible, it is sold as is without warranty. 100V specification Reference power supply. This is a high quality AC generator that produces a clean, low distortion power supply. The 5 zones are isolated, and since mutual interference does not occur between each zone, the interference of each device can be completely shut out. By switching modes, you can check the voltage/distortion rate during input and voltage/distortion rate during output in real time. Stains and stains are conspicuous on the top plate. Serial 8L0159 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (English characters), power cord, mounting hardware
Main specifications: output 1500 VA output outlet, 5 zones, 10 ports, size W425 x H104 x D413 mm, weight 15.9 kg
Comes with original box A CD player limited to 250 units sold as a memorial model for the 10th anniversary of the establishment of SOULNOTE. Equipped with a dual TI stereo DAC “PCM1792A,” L/R are completely separated. This model achieves a delicate and majestic dynamic range by configuring a perfectly symmetrical balance circuit. The exterior is also good with no particularly large conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual, power cable, spike, original box
Main specifications: Dynamic range 96 dB total harmonic distortion ratio 0.0022% channel separation 98 dB digital filter 24 bit 8 times oversampling analog filter 3rd order passive type W430 x H109 x D393 mm (when spikes are attached) weight 9.0 kg
The price has been drastically reduced. 2024/4/18 sales price 118,000 yen This MC boost transformer is ideal for SPUs using the JS transformer TYPE0.32M No. 6600. The sharp high frequencies and the tenacious sound in the mid and low frequencies make the SPU sound even more energetic. There is rust on the exterior due to paint peeling (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: none
Main specifications: boost ratio 31 times with bypass function, primary impedance 1.5 ohm/secondary impedance 1.5 kΩ dimensions W90 x H68 x D88 mm weight 420 g
Maintained! An improved version of the BC-1 standard monitor broadcast by the British BBC, a model that plays British sound in an attractive way. The brilliance and elegant expression of the classical sound source strings and vocal music are workmanship that can be said to be the prototype of the beautiful sound of European models. Serial 6429 6430 (Hiroki Aso)
Maintenance information: 2024.4.2 Maintained (exterior repair/stain coloring
Front Baffle Paint Rear Baffle Cleaning Saran Net Replacement/ Internal Urethane Replace/ Dowel Adjustment Woofer Single Side Edge Reinstall Center Adjustment Super Tweeter Cleaning Terminal Brand New Replacement Unit Detachable)
Accessories: saran net
Main specifications: 3-way bass reflex type 8Ω 50W W305 x H635 x D298 mm 14 kg
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move to the desired position and perform without touching the tone arm are convenient, so you can easily enjoy analog. The exterior has small scratches, dullness, and a feeling of use (Hiura Katsuji)
Maintenance information: 2020.9.7 maintenance completed (full arm disassembly, rewiring, arm bearing outer race cleaning, bearing ball replacement, oil lubrication, motor shaft oil lubrication, semi-fixed VR replacement for rotation adjustment, rotation adjustment implementation, needle pressure adjustment VR and operation SW disassembly, cleaning, auto sensor position adjustment, operation confirmation of each function, sound output check)
Accessories: M44G
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
The price has been reduced! 2023/4/16 sales price 668,000 yen pure A grade stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. Not only is the sense of power and powerful bass, but the contoured, stretchy mid-to-high range is still appealing. There are scratches and scratches on the exterior. Serial F4Y151 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord (general purpose)
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
Maintenance such as replacing capacitors and replacing deteriorated parts was completed in 2015/11. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. There is a feeling of use such as scratches and lettering disappearing on the chassis (Mizushima Itsuro)
Maintenance information: 2015.11.19 maintained (EL.C12μF1 exchange/EL.C100μF 2 replacement, R2W 4 replacement, R1/2W 4, AC cord exchange/RCA jack caulking and polish repair/VT socket caulking repair*Other parts check (OIL.C has been unified to orange drop))
Accessories: Copy of instruction manual (English)
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
The price has been drastically reduced. 2024/4/19 sales price 398,000 yen A full-range speaker that uses a Satsuma Shimadzu 6cm DSS diaphragm. It is intended for low volume playback, so you can enjoy realistic sound that transcends size. The beautiful solid cherry wood enclosure is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: instruction manual, unit protector, cable hook, screws, + screwdriver, cross
Main specifications: 6cm full range 80dB 4Ω input resistance 15W main unit W150 x H260 x D210 mm, stand height 650 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570 Hz, 3.5 kHz impedance 8 ohms allowable input 200 W efficiency 90 dB size W185 ✕ H1,000 ✕ D300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
The price has been drastically reduced. 2024/4/20 sales price 248,000 yen Genuine AC is out of stock. An esoteric isolation transformer. Stress-free 6N copper wire is used as the coil wire. We are pursuing the ultimate clean power supply environment by using the same extra thick 6N copper single wire for internal wiring. In addition to scratches on the exterior and top plate, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmation (power can be turned on)
Accessories: instruction manual
Main specifications: maximum rated power 1,500 W, number of outlets 6 external dimensions W246 x H219 x D422 mm, mass 31 kg
The 1.0 m digital coaxial cable has a 2.5% silver coating and is a mid-range model that balances every element at a high level. Comes with original box (Sasaki Shota)
Maintenance information: 2024.4.21 operation confirmed
Accessories: original box
Video digital cable, 1.0m, RCA terminal, SP-LGC conductor, entry model for the company's digital cable. There is a big difference in sound just by replacing it with a general-purpose digital cable (Kojima Yosuke)
Accessories: original box
Video digital cable, 1.0m, RCA terminal, SP-LGC conductor, entry model for the company's digital cable. There is a big difference in sound just by replacing it with a general-purpose digital cable (Kojima Yosuke)
Accessories: original box
Pair tube ambient heat beam tube made in America, measured value 42/40 (rejection value 25) with original box (the claws on one side of the box are missing) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Maintained! John Carl's slim-design “flat preamp” is the first control amplifier equipped with an original module developed in-house. Thorough simplification and a straight, coined tone with carefully selected high quality parts are the model that became the basis for later Mark Levinson preamps. Serial 1306 (Murakoshi Yoichi)
Maintenance information: 2024.4.20 maintenance (new power supply made inside the original power supply, Lch gain changeover switch replacement, volume gang error correction, function switch contact cleaning, specification inspection, various operation inspections) 2024.3.3.13 maintenance (various inspections, aging) 2023.10.27 maintenance (RCA terminal replacement, inspection adjustment)
Main specifications: 5 module phono (MM) compatible RCA input/output body size W482 x H60 x D195 mm (actual measurement) 4.2 kg (actual measurement)
A masterpiece tuner equipped with an 8-channel vari-controller. It was introduced to the world as the first pulse-counting unit developed by Trio ahead of the rest of the world, and it is a model with a reputation for sound quality. You can get a sense of satisfaction just by turning the heavy tuning knob. Serial 530245 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: copy of instruction manual
Main specifications: FM dedicated tuner, equipped with 8 vari-controllers, W440 x H154 x D393 mm, 11.5 kg
*Only a simple 2ch test has been carried out, and since no other checks are possible, it will be sold as is. Digital AV preamp compatible with Dolby Atmos and DTS X. High-precision computation processing using 64 bits is possible for equalizing processing of all bands. Equipped with a viewing environment optimization system “YPAO” (Yamaha Parametric Room Acoustic Optimizer) specially designed for this unit. This is a next-generation AV amplifier with a focus on digital sound processing. Serial Y032095UW (Fujisawa Yukishi)
Maintenance information: 2024.4.21 Operation confirmed (2ch simple test only. (Detailed checks have not been confirmed)
Accessories: remote control, instruction manual, FM antenna, microphone, original box, microphone base
Main specifications: 65W W350 x H192 x D474 mm 13.5 kg
When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced. There are scratches on the exterior. Serial 00753, 00754 (Fujisawa Yukishi)
Accessories: instruction manual, original box
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
Genuine Electri Active subwoofer powered by a digital amplifier. Presets that match the music or scene can be called up with the buttons on the remote control, so it's easy to use. There are scratches on the exterior. There are buttons on the remote control that respond slightly poorly. Serial 711491090 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: remote control, instruction manual (English characters), power cord, original box
Main specifications: W380 x H39 x D410 mm 22 kg
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. It's very slightly to the right. Serial 718026 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
Black, the highest peak in the 2M series, is now in stock. The stylus tip is equipped with the same high-grade solid diamond shibata needle as the famous MC Jubilee. Pure silver-plated high-purity copper wire is used for the power generation coil. The amount of information on 2M's highest peak is truly one word (Hiura Katsuji)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: original instruction manual box
Main specifications: output voltage 5 mV frequency characteristics 20 to 31,000 Hz internal resistance 47 ohms suitable needle pressure 1.5 g dead weight 7.2 g
TANNOI Fusion series bookshelf speakers. The bus unit uses a paper cone mixed with several types of fibers, and the response and texture to low frequency output are further improved, and natural and powerful bass reproduction is realized. Furthermore, we have obtained medium and high frequencies with an excellent sense of depth with a 16 mm thick particle board with high rigidity and excellent acoustic characteristics. There is a feeling of use on the exterior, such as scratches and peeling veneer (Tamai Jun)
Maintenance information: 2024.4.21 sweep checked
Accessories: Saran net jumper bass reflex sponge
Main specifications: size W204mmH380mm×D27mm Weight 6.4 kg Frequency characteristics 48-20kHz
Genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
The price has been reduced! 2024/4/18 sales price 6,000 yen*Currently sold. A long-selling model of phono equalizer for MM type cartridges. You can feel the thickness of the sound for the price, probably because of the good old design. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: none
Main specifications: rated input 2.5 mV (1 kHz) rated output 150 mV (1 kHz) power consumption 0.6 W W73 × H62 × D162 mm weight 640 g
The price has been reduced! 2024/4/18 sales price 7,500 yen RCA cable, 1.5 m pair, rhodium plated plug, accuphase, genuine OFC series cable, cable with excellent corrosion resistance, looks like a high-purity OFC Ritz wire, and it sounds supple at the same time as extrusion in the mid to low range. The exterior has a feeling of use such as rubbing, dirt, and bending habits on the sheath (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Maintained by Denon! This is DENON's mid-range model, and is a staple machine with an excellent sense of stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There are small scratches on the exterior. Serial 8061507480 (Tamura Eiji)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 79,800 yen Hi-Fi Hall first arrival! A compact and elegant DALI tall boy speaker with sharp low frequencies and clear midrange, and an airy treble range. The exterior has a scratch on the stand, a scratch on the side of the main unit, and a small scratch on the top plate. Serial 6255811 (Sato Wataru)
Maintenance information: 2024.4.2 sweep test is good
Accessories: instruction manual, spike, saran net
Main Specifications: Frequency Characteristics: 39~26kHz 88dB Impedance 4Ω Tweeter 29mm Soft Dome Midrange/Woofer 130mm/SMC Wood Fiber Cone Driver ✕ 2 Dimensions W162 ✕ D283 ✕ H830mm Weight 10.8 kg
The price has been reduced! 2024/4/11 sales price 45,000 yen Woofer edge softening treatment was completed in March 2021! The sharp mid-high range, which is typical of a diamond tone, is characteristic. The low frequency thickness unique to 30 cm is also attractive, so you can enjoy it in all genres. There are some dents on the exterior. Serial 16747/16900 (Yonejima Satoshi)
Maintenance information: 2021.3.6 Maintained (softened)
Accessories: saran net
Main specifications: 3 way 3 speaker sealed impedance 6 Ω playback frequency band 35 Hz-35 kHz crossover 500 Hz/4 kHz maximum input 230 W sound pressure 91 dB W380 x H680 x D325 mm 27 kg
Line transformer using TANGO's input transformer, NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70 H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced. 2024/4/5 sales price 99,800 yen Maintained! It is an impressive British Rogers compact speaker with a crisp grain and a sense of density. I was impressed by the fact that this speaker values analog flavor in a range with a sense of moderation without daring to be greedy, such as a sense of volume or scale in the low range. Serial 1247 (Asaine Tomoho)
Maintenance information: 2024.4.5 maintained (exterior cleaning/repair saran frame painting/net replacement woofer maintenance (edge softening treatment, center misalignment adjustment on one side))
(Detachable unit)
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 2 speakers sealed bookshelf type 45W W190 x H302 x D162 mm 5.0 kg
Refreshed and maintained with attention to detail, such as replacing deteriorated parts! It's a beautiful item with a wooden case! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The wood case is made with a pan lock for replicas. Serial 53A03 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (front lamp wiring re-soldering procedure, AC cord, 1W and 1/2W replacement, TREBLE switching noise reduction measures → 1/4 W resistance added, RCA jack and vacuum tube socket re-caulking repair. Operation check with AC 100 to 117 V) 2016.2.5 maintenance completed (main volume disassembly and cleaning repair, EL.c40μf, EL.c100μf replacement, 2 additional diodes, RCA jack and VT socket caulking repair, parts check including Block.C OIL.C)
Accessories: none
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
This is a model with PAD cryo treatment applied to the TOSHIBA 3P/2P conversion adapter. There are some cracks, but they are glued together (Oikawa Tetsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
※1 bottle only. TOA large metal radial horn. In terms of sound quality, it has a narrower impression than Altec's sectional horn 311, but it has a bright sound with a sense of overhang unique to radial horns. *The diameter of the mounting hole seems to be slightly smaller than ALTEC, so there is a possibility that ALTEC's 1.5-inch drivers will not fit depending on individual differences. Overall, there are wounds, dullness, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: cross 500 Hz or more, horizontal 90 degrees, vertical 40 degrees, throat diameter 35.5 mm, compatible driver HFD-651, width 720 mm, height 220 mm, depth 580 mm, 10.9 kg
Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. The exterior has dents in the upper right corner of the front, light line scratches in the lower left corner, and dullness throughout (Kanai Hidetsugu)
Maintenance information: 2024.4/18 manufacturer maintenance (disassembling the switch, polishing the contact, grease coating, idling adjustment, operation test)
Accessories: instruction manual, power cord
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
※It is cheap because it is in poor condition. Speaking of Grace, the F-8 is famous, and this was developed as a higher-level model. You can enjoy a powerful yet delicate sound. The condition is that there is a feeling of use such as dullness over time. The exterior has a feeling of use such as dullness, etc., and the needle tip is bent to the left (Asaine Tomoho)
Maintenance information: 2024.4.16 sound output confirmed
Main specifications: frequency range 10 to 40,000 Hz, output voltage approx. 5.5 mV, standard needle pressure 1.2 g, dead weight approx. 6 g
Speaker cable, 2.9 m pair, pure silver coated, 5N oxygen-free copper, flat cable with 12 cores arranged in a row. Since it has a structure that can be split into 4 parts, it can also be used by wire. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/4/16 sales price 138,000 yen genuine Rin Japan product. The Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are no noticeable scratches on the exterior. Serial 1324171 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord, original box
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The price has been drastically reduced! 2024/4/3 sales price 79,800 yen CASTLE's small studio monitor is in stock for the first time at Hi-Fi. A special version of the model that has received high praise since its inception. Even though it is crowned with a monitor, you can feel the high level of texture unique to being made in England that is easy to listen to. You won't get tired of listening to the supple sounds of vocals and strings. The exterior is a saran net, and there are small scratches on the main body. Serial BJH0009 (Yonejima Satoshi)
Maintenance information: 2024.4.3 sweep test is good
Accessories: saran net
Main specifications: 2-way rear bass reflex type frequency characteristics 60Hz-20kHz output sound pressure level 88dB rated impedance 8Ω W165 x H280 x D235 mm 5.1 kg