Pair tube 6SN7 compatible ball smoke made in England lot: 1185 MXA/1185 MXA measured value 64/64 (rejected value 50) with white box*Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube Russian lot: 0202/0107 measured value 36/36 (rejected value 25) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. As for the exterior, the cork around the frame has deteriorated (Mizusaki Ryo)
Maintenance information: 2024.4.28 Maintained (edge holes repaired with rubber adhesive, edge wood chips removed, center cap removed and dustproof net glued, magnetic circuit slit cleaned, rust prevention, coil bobbin center removal)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
Maintained! CELLO mono power amplifiers with low distribution volume. It is driven by Class A operation up to an output of 8W, and Class A operation with almost high texture in actual use. The sound is thick, roomy, and has a lot of information, but it is a quality unique to high-end machines that also has a sense of subtlety and sound field. RF Enterprise regular import model. As for the exterior, there are fine scratches on the top plate. Serial 0151/0152 (Fujisawa Yukishi)
Maintenance information: 2023.9.25 Maintained (replace all deteriorated capacitors. (Spec inspection)
Accessories: power cord (non-genuine), Fisher XLR conversion cable
Main specifications: 230W+230W (8Ω) 400W+400W (4Ω) W480 x H185 x D693 mm 35 kg
Maintained in 2019! AC100V specification This is the 5th generation SL-1 vacuum tube control amplifier, which is highly evaluated overseas. The sound potential of vacuum tubes has been maximized by thorough noise countermeasures, such as making the special coating inside the chassis non-magnetic and separating the power supply. A rotary resistor with a silver contact is used for the volume, so there are no omissions. There is a dull feeling of use throughout the exterior. Serial 005014 (Fujisawa Yukishi)
Maintenance information: 2019.2.23 manufacturer maintained (stepped VR control contact cleaning. Repairing the power transformer attachment. (I can't get the balance gap)
Accessories: instruction manual (English), power cord (non-genuine)
Main specifications: 3 line inputs, phono inputs: 2 MM compatible output systems, external dimensions: main unit W483 x H133 x D340 mm power supply W310 x H115 x D175 mm Weight: 34.8 kg (main unit, power supply)
A power amplifier with a sense of speed and sharpness unique to Threshold. The sense of volume in the mid to low range is also sufficient, and it makes you enjoy music with dense sound throughout the entire range. There are small scratches and dullness on the exterior. H8010186 (Fujisawa Yukishi)
Maintenance information: 2013.10.6 Maintained (electrolytic capacitor volume replacement, circuit protector replacement. Replace the rubber foot and replace the input RCA jack. Bias and offset checks, maximum output checks, interior and exterior cleaning)
Accessories: power cord
Main specifications: 100W+100W (8Ω) W480 × H192 × D342 mm 24 kg
Maintained including the creation of a new dust cover! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
※The felt is attached upside down. Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. Only 1 out of 4 has butyl rubber attached to the inside. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
Maintained in August 2022! A record jacket-sized masterpiece player that went on sale to commemorate the 10th anniversary of Direct Drive. The cartridge comes with the company's EPS-24CS replacement needle. Not only does it have a compact design and a repeat function, but it also has a mute function for a while after the needle falls, automatically detects the size of the board, and can also be used at an angle or upside down, making it a very convenient gem. Serial DA1629M222 (Takasaki Atsushi)
Maintenance information: 2022.8.30 Maintained (grease up motor bearings, linear tracking drives, tone arms and arm lifters. Replacing deteriorated electrolytic capacitors. The internal lighting was changed to a light bulb color LED. Various SW disassembly contact polishes. Create a driving rubber belt. Phono cable cable creation. Check the turntable rotation speed. Check arm needle pressure. Check the sound output. Simple exterior cleaning, comprehensive operation confirmation inspection.)
Accessories: copy of manual, phono cable, power cable, EPS-24CS
Main specifications: quartz lock direct drive MC head amplifier built-in linear tracking fully automatic player W315 x H88 x D315 mm 6.5 kg
A 6cm full range is mounted in an enclosure that reproduces JBL's masterpiece Paragon in a small size. The back road horn and rear leg height can be adjusted, so it's quite elaborate (Murakoshi Yoichi)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: 6cm full range, 8Ω, W527 x H160 x D145 mm, 2.4 kg
A 5-tier rack made of full-body solid natural wood with beautiful Asahi wood processing. We use 30mm thick solid natural wood for the top plate and bottom plate, and 25mm thick for the shelf board. The generous load capacity of 100 kg for the top plate, 50 kg for the middle shelf, and 150 kg for the bottom plate is unique to ADK, which has a sturdy structure. There is a slight scuff on the top plate. (Yamato Yuki)
Accessories: none
Main specifications: load capacity 100 kg, height adjustable with 3 shelves, 3 upper shelves, 5 lower steps (30mm pitch) dimensions W619 x H861 x D520 mm weight 41 kg
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
GE Valirella mono cartridge for SP I made a sound at the store, but the sound is so clear and powerful that I can't even imagine from my age. There is dullness over time and a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
※The cantilever is slightly leaning to the left, so it is inexpensive. The first stereo cartridge in the Empire lineup. The sound is perfect for the 6th to 70s editions where you can feel the core clearly (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
We generously use 3 types of luxurious high-purity materials, starting with the 1.2 m pair of RCA cables, pure silver coated OFC. Designed to go all the way to the tip of the terminal. This is a cable with a high degree of perfection that cannot be enjoyed in this class. There is an appearance, dullness, and a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
*Currently sold, this is DENON's long-selling 390 series 4th generation premain amplifier. Recommended for desktops and those with limited size. A classic model that is small yet thick in the mid-range, and has a steady sound. The exterior has a feeling of use over time, such as yellowing and dullness caused by tar. Serial 3111503497 (Tomonori Asaine)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: instruction manual copy remote control
Main specifications: 50W+50W (8Ω) PHONO (MM) W434 × H121 × D338 mm 7.0 kg
Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
Refresh yourself with internal and external maintenance! A popular model with an eye-catching bright blue baffle. A titanium dome is used for the tweeter, and the sharpness in the high range is excellent. The sounds of rock, jazz, etc. are pleasant, and the sound is sharp and sharp while the bass comes out well (Sasaki Shota)
Maintenance Information: 2024.4.27 Maintained (exterior cleaning/touchup/waxed finish. Saran net cleaning/reattaching Tweeter cleaning woofer cone paper touch up ATT cleaning)
Accessories: none
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 22 kHz crossover 2 kHz/5 kHz sound pressure level 93 dB impedance 6 ohms dimensions W362 x H597 x D299 mm weight 20 kg/bottle
High performance digital premain amplifier! Despite its thin size, it is an amplifier that boasts a 200W output. Although it is a lower brand of NuForce, it has not lost in its high resolution and sense of silence. You can hear the natural texture of the source and a very speedy sound. There are no noticeable scratches. Genuine Fusion Coordination (Shota Sasaki)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: 200W x 2 (8Ω) input terminals: USB Digital, Coaxial Digital S/PDIF, Optical Digital S/PDIF, RCA x 1 system output terminals: Optical (up to 24 bit/192 kHz), Stereo RCA (Line out) USB sampling rate 44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz /192 kHz/352.8 kHz/384 kHz DSD: 2.8 MHz/5.6 MHz/11.2 MHz (MAC OS up to 5.6 MHz) W430 x H50 x D381 mm weight 7.5 kg
Maintained by the manufacturer! A cassette deck that can record and play back sounds that are actually straightforward and have little coloring. It is equipped with a calibration function that demonstrates the performance of the tape. There are footprints on the top plate and scratches on the corner (Sasaki Shota)
Maintenance information: 2024.4.27 manufacturer maintained (each SW, VR contact defect cleaning. Head, roller, guide cleaning, flywheel and flange cleaning lubrication. Recorded again. Tape running adjustment)
Accessories: copy of the manual
Main specifications: 3-head configuration, bias adjustment function, metal tape compatible, 4 tracks, 2 channels, frequency characteristics 20 Hz to 20,000 Hz, W500 x H130 x D350 mm, 8.3 kg
A rare, early-stage pottery model! It is an interesting speaker with a strong element of play, which is very popular as a second system as an interior decoration. The shape changes depending on the generation. There are small scratches over time, but there are no noticeable scars (Sasaki Shota)
Maintenance information: 2024.4.27 sound output operation confirmed
Accessories: nothing
Main specifications: Jordan Watts module, caliber 10 cm, single cone, full range, 8 ohm, W172 x H155 x D65 mm, 9.0 kg/book
※It has a cigarette smell, so it's cheap. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. The exterior has dullness, scratches, etc. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)). (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: remote control, power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
※It's cheap because of the smell of tobacco and the remote control being out of stock. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
A unique structure in which ribbon-shaped conductors using 1.0m pair collet chucks for RCA cables are arranged spirally on the outside of SVPE insulation. As a result, there is no extra cushioning on the positive side and negative side. The resolution is high and the low-frequency expression is excellent. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
Maintained! This is the first AUDIO OF OREGON control amplifier to be in stock in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been reduced! 2024/4/23 sales price 258,000 yen Maintained! Comes with a cabinet. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a scratch on the cabinet and a crack in the mounting plate. Serial JEB7808 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Maintained (panel peeling fix. Polishing grease applied to all push switch disassembly contacts. Rotary switch contact cleaning. Volume contact cleaning. Electrolytic capacitor replacement, panel lamp replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D390 mm 11.8 kg
Speaker system with 2 French Suprabox field type full range 215EX units and 40cm woofers 400-2000EXC. It combines a sense of speed that makes it impossible to return to a permanent magnet, and an audible response. In addition to small holes scattered on the exterior and top plate, a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 sound output confirmed
Accessories: dedicated power supply unit, connection cable, power cable
Key Specifications: 2 way 3 speakers W600 x H1200 x D270 mm
The best model in the BAT series. Cut the area below 15 kHz that can be heard by humans as much as possible, and cut the coverage with the main speaker. It has a natural sense of spaciousness and a firm, strong axle, and a light impression that is easy to remove. Thick wooden cabinets, brass horns, and brass inverted conical spikes are used to ensure rigidity and beautiful form. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: original box
Main specifications: Drive system/bimorph polymer piezoelectric hail type drive (TAT drive) maximum rating/100V (however, test signals at 20kHz or higher are up to 20V) protection circuit operates on excessive input (returns to normal after a few minutes of turning off the power) impedance/infinity ~ 140Ω to 28Ω (DC ~ 20kHz to 100kHz) playback frequency band/ 18 kHz to 150 kHz or more (18 kHz or less with a hail structure and 0.1 μF capacitor (It has been cut steeply) Maximum output sound pressure/100dB/W/m, 5-step switching W110 × H70 × D100 mm 720g
Orthophone mono cartridge. It's a cartridge that allows you to fully enjoy the heavy sound of a mono disc. Serial 022736 (Mizushima Itsuro)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: original box, needle cover
Main specifications: mono MC type cartridge output 3 mV impedance 100 ohms needle pressure 3.5 to 5 g dead weight 31 g
It is a 3-way center speaker tuned to best match the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
Volumio audio file music player transport. Equipped with the latest operating system Volumio 3, which has a unique Manifest interface that allows you to easily manage music content. The simple structure transmits digital signals naturally and cleanly to the DAC (Murakoshi Yoichi)
Main specifications: output USB 2.0 (PCM768kHz/32bit, DSD256), coaxial S/PDIF, AES/EBU (PCM192kHz/24bit), HDMI 2.1/HDCP2.2 (4K maximum 60 fps) connection terminals USB 3.0, 1 USB 2.0 system each, LAN, Wi-Fi, Bluetooth compatible services Airplay via Airport Sync, Spotify & Spotify Connect, TIDAL & TidalConnect, QOBUZ compatible plug-in YouTube, Squeezelite, Radio Paradise, Podcasts, Pandora, FusionDSP, Room Bridge, Soundcloud, Mixcloud W270 x H50 x D150 mm 1.14 kg
※It is inexpensive because the finger is curved. Audio-Technica headshell It is a classic model with stable popularity and high versatility (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
A compact and easy-to-use Orthophone digital needle pressure gauge. The operability is also simple, and it is possible to easily adjust the needle pressure with high accuracy (Mizushima Itsuro)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: instruction manual, original box
Main specifications: Equipped with auto power off function, measurement range 0.1 to 200 g (0.1 g units) W59 x H17 x D120 mm 68 g
A genuine headshell included with the Technics SL-1200mk7, etc. There is a slight chip in the screw hole (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g
A genuine headshell included with the Technics SL-1200mk7, etc. There is a slight chip in the screw hole (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g
Maintained! You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. The exterior has a feeling of use, such as dullness and paint peeling. Serial 10904 10896 (Hiroki Aso)
Maintenance information: 2024.4.27 Maintained (center cap replacement, corn paper coating, edge damping agent applied)
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
Interior and exterior maintenance completed! English studio monitor with TANNOY HPD385 installed. It's deep and you can feel that the scale is wide, and the size is clean, so the room's layout will expand. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.4.27 Maintained (exterior cleaning/repair
Saran net replacement unit maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, fastener polishing) unit detachment network maintenance frequency characteristic check ATT cleaning high range capacitor replacement (3.3 uf, 4.8 uf) 4 pin terminal contact cleaning)
Accessories: none
Main specifications: size W510xH769xD380mm weight 32.2 kg (actual measurement)
※It is cheap because it is in poor condition. Denon's MC cartridge used to be an introduction machine. The sound quality has a sense of transparency that extends smoothly from low to high frequencies without clogging. The famous DL-103 Yuzuri cartridge has a good balance of range, density, and volume. In addition to being dull on the exterior, there is a feeling of use such as the part number plate peeling off. Serial 6984 (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.3 mV internal impedance 40 ohms needle pressure 1.5 to 2.1 g special elliptical needle double structure tapered cantilever dead weight 4.5 g
An early SHURE camemo mark MM type cartridge. The mid-range push is strong and the sound quality is crisp and dry. In addition to being dull on the exterior, the needle tip is slightly to the right (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MM output voltage 5 mV needle pressure 1.5 to 3.0 g dead weight approx. 6 g
It features a bright and tense American sound. This cartridge also has the same resolution as an MC cartridge, and is suitable for JAZZ and ROCK systems. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: needle tip 0.3 x 0.7 mil oval needle pressure 0.75 to 1.5 g
GOLDRING MM Cartridges The output voltage is high, easy to use, and the sound is rich in color and satisfying to listen to. The exterior has a feeling of use, such as dullness on the body (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: original box case
Main specifications: GYGER2 diamond needle model MM type 6.5 mV needle pressure 1.5 to 2.5 g (proper needle pressure 1.75 g) dead weight 6.3 g
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. In addition to the exterior and finger tips being straight, you can also see a feeling of use such as dullness (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g
The company's standard grade cable uses high-purity OFC (oxygen-free copper/4N) as the 1.0 m pair of RCA cables as OAI7 conductors to achieve transparent sound. Recommended for the first step in cable tuning (Tomoho Asae)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. There is a feeling of use such as dullness on the exterior (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none