※It is inexpensive because the condition is poor due to scratches, threads, and partial sheath deformation. Off sale power cable, 1.0 m, has an unprocessed end that combines performance and safety at an astonishing level. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: No accessories
USB cable 1.2 m, aiming for a high level of sound quality, the cable structure has a 3-layer shield structure that thoroughly blocks noise and reduces signal loss, uses silver-plated α-OCC as the conductor, and a 24K gold-plated plug for the connector (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: none
*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
※There is no problem with operation, but it is currently sold because it is cheap. A small 2-way speaker made by ONKYO. The bass reflex system allows you to enjoy low frequency playback with a compact appearance yet a sense of volume. There is slight stickiness on the front (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: 2-way bass reflex type rated impedance 4 ohms maximum input 120 W rated sensitivity level 82 dB W156 x H249 x D221 mm 4.1 kg
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
The price has been reduced! 2024/4/23 sales price 45,000 yen*Saran net is out of stock. A smash hit by ALR JORDAN. The sound quality is outstanding at this size. The impression is that the volume does not change from low volume to quite high volume, and the sound is on a large scale not typical of a small speaker. There are small scratches and dullness. Serial 25230149, 25230149 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: No accessories
Main Specifications: 2 Way 2 Speaker Sealed Usage Unit 11.5cm Metal Cone Woofer/25mm Soft Dome Tweeter Rated Input 90W Frequency Characteristics 70 to 30,000 Hz Impedance 8 Ω Output Sound Pressure Level 86 dB (2.83 V/m) Recommended Amplifier Output 25 to 150 W Crossover Frequency 2,800 Hz Enclosure Natural Alloder Material Finish (with Screw Holes for Brackets) Dimensions W137 × H220×D190mm weight 3.0 kg
※The veneer is peeling, the top plate is undulating, and the grill is indented, so it is inexpensive. This high CP model was released in the 49th year of Diatone's founding. It has a very well-balanced, rounded, and gentle tone. I can do everything from jazz and rock to classical and pop music as an all-rounder (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers, 6.3 ohms, sound pressure level, 90 dB, W380 x H680 x D295 mm, weight 25 kg
A digital premain with a neutral, clear tone and spatial expressiveness. While saving power with a power consumption of 42W, it demonstrates outstanding speaker driving power, making it ideal for listening at low volume levels. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: spike, spike holder, 2 spare knobs, instruction manual, power cord
Main specifications: rated output 60 W x 2 (8 Ω) S/N ratio 100 dB frequency characteristics 5 Hz to 100,000 Hz input sensitivity 500 mV/10 kΩ input RCA analog 3 systems/1 front mini stereo jack system W420 x H98 x D243 mm 6.0 kg
Denon premium headphones. The resolution is high, the sound is natural and soft, and makes you feel the high level of musicality. Even though it is sealed, it has excellent S/N, and the sound does not collapse even when the volume is raised. The exterior is slightly oxidized. Serial 1041802012 (Yonejima Satoshi)
Maintenance information: 2024.4.24 sweep test good
Accessories: instruction manual
Main specifications: sealed headphones, dynamic aperture 50 mm driver unit, 25 ohms, 108 dB, 5 to 45,000 Hz, 370 g
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Although it is a standard model, you can perform SACD playback that is not inferior to higher-level models, and you can clearly experience glossy sound in the mid and low frequencies typical of Denon. Dullness can be seen throughout, but there are no noticeable scratches. Serial 8051508325 (Fujisawa Yukishi)
Maintenance information: 2024.3.31 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: CD/SACD compatible AL24 Processing playback frequency band 2Hz to 100kHz (SACD) 2Hz to 20kHz (CD) SNR 104dB (SACD) 110dB (CD) W434 × H135 × D331mm 7.6 kg
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke)
Accessories: original box
Good level! Caster specification! ADK 4-tier rack. Natural wood and essential aluminum materials are used, and the design is also high. The main body frame and inner plate are prevented from vibrating with special material spacers. (FUJISAWA KOSHI)
Main specifications: 180mm, 180mm, 230mm from the top of the 4-tier rack post, W600 x H775 x D450 mm, approx. 16 kg
Maintained by the manufacturer! This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. There are multiple scratches on the top plate. The LCD is slightly dark (Sasaki Shota)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test)
Accessories: remote control, copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
The price has been reduced. 201/11/9 sales price 75,000 yen Maintained! This is a cross 1200 Hz/2 way network. The bass is also extruded well, and since the high frequency adjustment range can be taken widely with 2 types of HF/MF attenuators, this model is easy to match with the desired sound quality. There are brown spots on the exterior (Wang Zhan)
Maintenance information: 2016.11.7 Maintained (terminal polishing, cleaning. ATT cleaning. Common line enhancements. Check the input/output waveform and balance, and check the sound output. The frequency characteristics were measured and there were no problems, so the capacitors were used as they were.)
Accessories: No accessories
Main specifications: Crossover frequency 1.2 kHz 8 Ω level control is continuously variable in the middle range up to -8 dB at 2 kHz, high range continuously variable up to -6 dB at 10 kHz W114 × H190 × D228 mm 1.8 kg
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
The price has been drastically reduced! 2024/4/3 sales price 79,800 yen CASTLE's small studio monitor is in stock for the first time at Hi-Fi. A special version of the model that has received high praise since its inception. Even though it is crowned with a monitor, you can feel the high level of texture unique to being made in England that is easy to listen to. You won't get tired of listening to the supple sounds of vocals and strings. The exterior is a saran net, and there are small scratches on the main body. Serial BJH0009 (Yonejima Satoshi)
Maintenance information: 2024.4.3 sweep test is good
Accessories: saran net
Main specifications: 2-way rear bass reflex type frequency characteristics 60Hz-20kHz output sound pressure level 88dB rated impedance 8Ω W165 x H280 x D235 mm 5.1 kg
※ There are crack repair marks and chips on the remote control. Maintained! An improved model of the CDP-X555ES. Equipped with a pulse DAC developed in-house, it is the core model of the ES series and uses a sapphire bearing motor and a copper-plated FB chassis. The sound quality is soft and smooth even though it has a core in the mid to high frequencies. You can enjoy not only vocal sound sources, but also rich classical music and jazz. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 Maintained (partial pickup dismantling, mechanical system and optical system adjustments on cleaning and polishing. Mechanism drive belt replacement. After disassembling the SPDL motor, wipe off the cured grease and reapply. Level volume wash)
Accessories: remote control, instruction manual, original box
Main specifications: PICKUP/KSS-272A D/A converter/CXD2562 digital filter/CXD2560 digital output: optical frequency characteristics 2Hz to 20kHz W470 x H125 x D375 mm 13 kg
Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law)
Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
The price has been drastically reduced! 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8000 Hz maximum input 40 W 8 Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
The price has been drastically reduced! 2024/4/23 sales price 99,800 yen genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The 3rd generation model of the S10 series. Equipped with analog waveform reproduction technology AL24 Processing. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Hiroki Aso)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations; if it breaks down in the future, pickups cannot be obtained loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
The price has been drastically reduced. 2024/4/27 sales price 148,000 yen The current studio monitor 4309 equipped with the latest sound technology has arrived. A ring radiator type compression driver similar to the higher-level model is used for the medium to high range unit. It is also highly capable as a desktop monitor. There are repair marks on the exterior and top plate, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper, manual, original box
Main specifications: 2-way bass reflex type nominal impedance 4 ohms output sound pressure level 87 dB frequency characteristics 42 Hz to 30 kHz crossover frequency 1.6 kHz W260 ✕ H419 ✕ D227mm 11 kg
The price has been drastically reduced! 2024/4/18 sales price 178,000 yen 2024/1 maintenance completed! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.1.12 Maintained (exterior repair stain tinted front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
The price has been drastically reduced! 2024/4/27 sales price 178,000 yen rare item. Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 Inspection operation confirmed (when MC is input at 1 GΩ, ① knock down dip switch No. 2 No. 5 to the front side. It can be used by ② tilting the DIP Switch No. 1 and 6 to the front side ③ and inserting the short pin into the MM terminal). (MC input setting for current 330 ohm load) Operation was tested with each function for internal inspection of the main unit and power supply unit.)
Accessories: power supply unit, copy of instruction manual
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
※The tweeter is cheap because it has dents. A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals (Murakoshi Yoichi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: spikes, saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, anti-magnetic design, frequency characteristics, 35 Hz to 20 kHz, impedance, 4 ohms, output, sound pressure level, 90 dB, W237 x H1080 x D310 mm, 25 kg/book
Maintained by the manufacturer! It is the origin of Sun Valley and is the most popular 845 single power amplifier kit model. Sister level 211 can also be used. Please enjoy the original appeal of hand-wired tube amplifiers (Murakoshi Yoichi)
Maintenance information: 2024.4.26 manufacturer maintenance (vacuum tube replacement L/R gain adjustment, high pressure wiring glass tube processing, solder part check, re-soldering, wiring routing correction, screw fastening confirmation, tightening, output, gain noise, etc.)
Accessories: instruction manual, power cord
Main specifications: 845/211 single 16W+16W or more (211 is 7.5W+7.5W or more) impedance 8Ω W410 x H240 x D275 mm 15 kg
The price has been drastically reduced. 2024/4/24 sales price 248,000 yen with dedicated stand DK-205! A masterpiece of Diatone. The DS-205, which makes you feel the design of yesteryear, has arrived! The small aperture woofer is played in a large capacity enclosure, and the deep sound, which also has a soft, puffy texture, is attractive. It is a gem that is highly appreciated by music fans. Compared to the R305, etc., it is one size smaller and easier to handle. There are repair marks on the side molding, front of the stand, etc., and dents and abrasions are scattered (Kanai Hidetsugu)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: dedicated stand, saran net, jumper cable (replacement)
Main specifications: 2-way 2-speaker bass reflex output sound pressure level 88dB impedance 4Ω anti-magnetic design size W482 x H700 x D362 mm weight 26 kg stand H450 x H230 x D351 mm weight 9 kg
Refresh yourself with internal and external maintenance! A popular model with an eye-catching bright blue baffle. A titanium dome is used for the tweeter, and the sharpness in the high range is excellent. The sounds of rock, jazz, etc. are pleasant, and the sound is sharp and sharp while the bass comes out well (Sasaki Shota)
Maintenance Information: 2024.4.27 Maintained (exterior cleaning/touchup/waxed finish. Saran net cleaning/reattaching Tweeter cleaning woofer cone paper touch up ATT cleaning)
Accessories: none
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 22 kHz crossover 2 kHz/5 kHz sound pressure level 93 dB impedance 6 ohms dimensions W362 x H597 x D299 mm weight 20 kg/bottle
The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. As for the exterior, the cork around the frame has deteriorated (Mizusaki Ryo)
Maintenance information: 2024.4.28 Maintained (edge holes repaired with rubber adhesive, edge wood chips removed, center cap removed and dustproof net glued, magnetic circuit slit cleaned, rust prevention, coil bobbin center removal)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
The original appeal of Arden, where a simple, beautiful design and deep sound coexist with full internal and external maintenance utilizing original capacitors, has been revived. This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. The sense of scale of the orchestra and the smooth playback of stringed instruments are satisfying enough to listen to. There are repair marks on the edge of the cone paper on one side and the top surface on one side. The exterior has been beautifully finished due to exterior maintenance. Serial 0016190/0005927 (Murakoshi Yoichi)
Maintenance information: 2024.4.3 maintenance (exterior repair) 2022.5.30 maintained (output terminal contact cleaning. Chassis screw replacement. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (low range side: edge replacement, magnetic circuit rust removal/gap cleaning/center adjustment, high range side: magnetic circuit rust removal/gap cleaning/center adjustment. Exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement. (Detachable unit)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
The price has been drastically reduced! 2024/4/26 sales price 498,000 yen It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
Full maintenance from each unit to the network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. There is a scuff on the diffuser (Kobayashi Hitoshi)
Maintenance information: 2024.4.27 maintained (exterior repair, saran net replacement/frame repair, woofer maintenance: edge replacement/cone paper coating, mid maintenance: edge replacement/cone paper coating, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning, tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning, Network maintenance: frequency characteristics check, ATT cleaning, terminal cleaning, unit detaching/diffuser repair)
Accessories: saran net, diffuser
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg