Maintained. with cabinet! A power amplifier representing the McKinn Golden Age. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Exterior features include chips and bumps on the cabinet. Serial JCT 4858 (Murakoshi Yoichi)
Maintenance information: 2024.4.3 Maintained (electrolytic capacitors (large capacity capacitors use used products of the same type)), resistors, lamps, etc. have been replaced. Missing screws and rings added. panel paint. Solder correction. Pattern correction. Clean VR and SW connectors. Loosen the screws and tighten them. Bias and offset checks. Output audio check)
Accessories: instruction manual (copy)
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
Denon's pre-main amplifier. They generously introduced special custom capacitors, and I can only say that 4 years of development were spent, so it's pretty good. The sound is well grained, and the sound comes out comfortably over the entire area. The exterior is good with no conspicuous scratches. Serial BMM15220700235 (Hiura Katsuji)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: 50W+50W (8Ω) 100W+100W (4Ω) PHONO (MM/MC) balance input x 1, unbalanced input x 5, PHONO (MM) input x 1, PHONO (MC) input x 1, EXT. PRE×1 analog audio output terminal unbalanced output (RECORDER) ×1 frequency characteristics 5 Hz to 100 kHz W434 × H181 × D504 mm 29.5 kg
A classic MC boost transformer. With 2 input systems, impedance can be switched to 3.40 ohms, and comes with a PASS line, you can freely enjoy various cartridges and tone arms (Takasaki Atsushi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Balance cable 1.0m pair Glen optimized copper+polymer coating features a rich three-dimensional, high-contrast expression. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
Speaker stand for YAMAHA NS-05 and NS-1 Perfect for other companies' small speakers (Takasaki Atsushi)
Accessories: none
Main Specifications: Speaker Stand External Dimensions W250 ✕ H385 ✕ D330 mm Weight 4.0 kg
RCA cable, 1.0 m pair, antistatic, transparent polymer, compression, twisted, 8N copper conductor, SVPE insulation, draws a clean and clear sound image. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box, seal
Balance cable 1.0m pair Glen optimized copper+polymer coating features a rich three-dimensional, high-contrast expression. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
RCA cable, 1.5 m pair, antistatic, transparent polymer coating, compression stranded, 8N copper conductor, SVPE insulation, draws a clean and clear sound image. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box, seal
Power cable 2.0m POWER MAX series high CP cable PCOCC-A conductor is used with a 3.5 scare copper foil shield, tourmaline sheath, carbon CSF tube, etc. and are built without compromise (Hiura Katsuji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
※6 month warranty. A PIONEER tall boy speaker with clean sound quality and good balance. It is a model developed for AV use, but it also sounds in a wide range as pure audio regardless of genre. It is a model with high cost performance even as an introductory machine. There are large tape marks on the exterior and back, and a feeling of use such as dullness and bruises can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose)
Main specifications: woofer 16 cm cone type x 2 mid tweeter coaxial 13 cm cone type, 3 cm dome type ribbon type super tweeter 6Ω 89dB W274 x H1075 x D366 mm 37 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/15 sales price 59,800 yen ※The exterior is in poor condition, so it's cheap. Equipped with a unit that uses wood fiber cone paper. The polished front baffle and rounded edges not only look great, but also reduce distortion during playback. The tone is detailed and transparent like DALI, and you can feel the expanse of space, and it goes particularly well with classical music. You can see the exterior, leg oxidation, rust, scratches on the top plate, torn corners on the saran net, etc. (Takasaki Atsushi)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: saran net
Main specifications: Unit configuration/mid and low range 180 mm cones x 2, treble range 25 mm soft dome frequency characteristics 40 Hz to 26.5 kHz crossover 2.4 kHz 90 dB 6 Ω recommended amplifier output 40 to 150 W W257 x H994 x D320 mm (including base) 14.9 kg/book
The price has been reduced. 2024/4/26 sales price 99,800 yen*Tweeter soft dome has dents on the rim, so it's cheap. Compact Excite series speakers. There is a sense of power in the sound unique to unit development manufacturers, and the sense of scale in the low range in particular is so majestic that the compact size is unbelievably large. As the sound progresses, the transparency of the sound increases, so the fact that you can keep listening is also attractive. There is a slight feeling of use such as small scratches. Serial 03573940/03573941 (Takasaki Atsushi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: saran net
Main specifications: 2-way bass reflex type 180mm woofer 27mm tweeter 4Ω 87dB frequency band 40Hz to 23kHz W205 x H350 x D290 mm 9.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/4 sales price 198,000 yen SACD player equipped with a discrete DAC. Equipped with a high-performance USB-DAC, it is compatible with a wide range of issues up to 384 kHz/DSD 11.2 MHz. The response is much better than the previous game due to the excellent FPGA. The sound quality, which has an excellent sense of subtlety, is suitable for long-term auditions, and it is an attractive player with a sense of quality with fine sound particles in the air. Serial AQE15200201004 (Mizushima Itsuro)
Maintenance information: 2024.4.4 operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable, original box
Main specifications: Playback frequency characteristics 2 Hz to 50 kHz (SACD), 2 Hz-20 kHz (CD) playback compatible sampling frequency (USB) PCM44.1 kHz to 384 kHz, DSD 2.8 to 11.2 MHz, (COAX) PCM44.1 to 192 kHz W440 × H123 × D419 mm 16.4 kg
A digital premain with a neutral, clear tone and spatial expressiveness. While saving power with a power consumption of 42W, it demonstrates outstanding speaker driving power, making it ideal for listening at low volume levels. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: spike, spike holder, 2 spare knobs, instruction manual, power cord
Main specifications: rated output 60 W x 2 (8 Ω) S/N ratio 100 dB frequency characteristics 5 Hz to 100,000 Hz input sensitivity 500 mV/10 kΩ input RCA analog 3 systems/1 front mini stereo jack system W420 x H98 x D243 mm 6.0 kg
A new-generation cartridge with the perfect setting for cord vinyl and powerful output. Compatible with hard environments such as DJ play, scratches, and vibrations (Kanai Hidetsugu)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: original box, instruction manual (English), needle cover
Main specifications: MM 10mV 20 to 18,000 Hz, proper needle pressure, 4 g dead weight, 18.5 g