Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
Manufacture:audio-technica
Price: JPY 455
- description
- An audio selector that allows you to easily switch between a total of 3 devices. Comes with a front input terminal. Compatible with φ3.5 stereo mini You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi) Accessories: none Main specifications: 3 input terminals (φ3.5 mm stereo mini, audio L/R), 1 output terminal (φ3.5 mm stereo mini, audio L/R) W190 x D85 x H32 mm approx. 210 g
Manufacture:JVC
Price: JPY 455
- description
- JVC AV selector. Devices such as 4 systems of players can be connected. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.23 Continuity confirmed Accessories: none Main specifications: 4 systems (input 1 to 4 video/audio L/R) output terminal 1 system (video/audio L/R) video frequency band 10 MHz W170 x H40 x D78 mm approx. 187 g
Manufacture:自作
Price: JPY 2,727(pair)
- description
- Unspecified pair of black granite boards. There are slits in the front and back that seem to be for tuning purposes. If you're looking for this size, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Accessories: none Main specifications: W245 x H15 x D245 mm 2.8 kg
- description
- Maintained. with cabinet! A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. There are chips and scratches on the exterior and cabinet, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi) Maintenance information: 2024.4.3 maintenance completed (electrolytic capacitor (using a used product of the same type as a large capacity capacitor), resistor, lamp replacement, missing screw and ring, panel paint solder correction pattern correction VR, SW, connector cleaning screw loosening, tightening bias and offset check output sound check) Accessories: copy of instruction manual Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
- description
- *Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.25 Operation confirmed Accessories: saran net Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
Manufacture:不明
Price: JPY 727
- description
- Cover is missing. Unspecified digital needle pressure gauge. It is a digital needle pressure gauge that can measure up to 5g in 0.01 g increments. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.23 Operation confirmed Accessories: none
Manufacture:不明
Price: JPY 1,091
- description
- Unspecified head shell. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Accessories: none Main specifications: dead weight 11g
Manufacture:SANSUI
Price: JPY 2,545
- description
- SANSUI headshell Model number and details are unknown. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Accessories: none Main specifications: dead weight 9g
- description
- ※It is inexpensive because there are many abrasions, stains, etc., and there is a feeling of use. A classic disc stabilizer. Moderate weight gives a sense of stability to record playback (Kobayashi Hitoshi) Accessories: none
- description
- It is a set of a directional velvet brush with high cleaning performance and a cleaning liquid that suppresses static electricity, but there is no liquid left. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Accessories: none Key Specifications: Cleaning Kit Wide Type
- description
- This is a wet cleaner for cords. A wide type that can wipe down the surface of an LP record. In addition to the appearance and yellowing, dullness and a feeling of use can be seen (Kobayashi Hitoshi) Accessories: none
Manufacture:DENON
Price: JPY 545
- description
- A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Accessories: none
Manufacture:DAITO VOICE
Price: JPY 2,727(pair)
- description
- *Currently sold. DAITO Voice 16cm full range unit. If you were looking for it, please go ahead (Kobayashi Hitoshi) Maintenance information: 2024.5.27 Operation confirmed Accessories: original box Main specifications: 8Ω 10W maximum 15W 16cm full range
Manufacture:DAITO VOICE
Price: JPY 3,636(pair)
- description
- *Currently sold. DAITO Voice 10cm full range unit. If you were looking for it, please go ahead (Kobayashi Hitoshi) Maintenance information: 2024.5.22 Operation confirmed Accessories: original box Key Specifications: 4Ω 15W 10cm full range
- description
- From exterior painting to driver gap cleaning, it has been refreshed and maintained with attention to detail! 4343 original unit, 4343GY by All Alnico! A famous machine that clearly expresses a rich low-frequency sound and a sense of depth, and continues to be popular even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-mic recordings regardless of age or genre. Serial 14004/14414 (Takasaki Atsushi) Maintenance information: 2023.4.17 Maintained (exterior repair/gray paint, Front and rear baffle repair/coating, saran net replacement, frame repair, woofer maintenance (edge replacement, cone paper coating), mid maintenance (edge replacement, cone paper coating), driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning), tweeter maintenance (horn disassembly cleaning, magnetic circuit rust removal/gap cleaning, terminal contact cleaning), Network maintenance (damaged terminal (x1) replaced from stock parts. Terminal rust removal, pickling, insulation bush & mounting screw replacement. There is evidence that the ATT was replaced by the user, but the round ATT was replaced with a new one with a square ATT with high power, the large ATT was disassembled and cleaned, contact grease was applied, and the wiring was re-soldered. INT/EXT switch-over SW contact cleaning A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output), detach the unit) Accessories: saran net, diffuser Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
- description
- From exterior painting to gap cleaning, it has been refreshed and maintained with attention to detail! This is a 612C monitor speaker with a refined masterpiece 612A system. The unit is an early model 604-8G. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also precisely determined, it is a practical and easy-to-use speaker (Takasaki Atsushi) Maintenance information: 2024.2.8 Maintained (exterior repair/polishing/full painting, network mounting hole processing, saran net replacement. Unit maintenance (gasket replacement, input terminal contact cleaning, high frequency side disconnection repair/magnetic circuit rust removal/gap cleaning/center adjustment) network maintenance (frequency characteristic check, panel float bonding, ATT disassembly cleaning, input terminal contact cleaning) terminal cleaning) Accessories: saran net Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz W648 × H749 × D509 mm 54.5 kg
- description
- ELAC's current speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi) Maintenance information: 2024.5.25 sound output confirmed Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken) Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg
- description
- The price has been reduced. 2024/5/26 sales price 228,000 yen 2023/10 manufacturer maintenance completed! The flagship stereo power amplifier model with a KT120 push-pull configuration by Sun Valley. An output transformer with a bifiler-wound custom-made by Hashimoto Electric is used. It achieves both a wide range of sound that is pleasant to listen to. This is a powerful power amplifier that can make even vintage speakers sound with modern speakers. The exterior is dull (Hiura Katsuji) Maintenance information: 2023.10.20 manufacturer maintenance (PT replacement with a brand new product, carrying out energization after returning the remodeled point to a normal state, measurement of voltage of each part and measurement of various characteristics, music playback test) Accessories: power cable Main specifications: used vacuum tube KT120 push-pull 55W+55W KT120 x 4 (TUNG-SOL), 12BH7A x 4 (ELECTRO HARMONICS), CV4003 x 2 W400 x H380 x D220 mm 32 kg
- description
- 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji) Maintenance information: 2024.5.26 sound output confirmed Accessories: instruction manual, power cable, original box Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
- description
- 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji) Maintenance information: 2024.5.26 sound output confirmed Accessories: instruction manual, power cable, original box Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
- description
- A speaker system incorporating the Fostex 16cm full-range unit FE167E into a self-made enclosure. Includes 2 types of saran nets. It's also a good idea to try painting it in your favorite color (Murakoshi Yoichi) Maintenance information: 2024.5.22 sound output confirmed Accessories: Saran net (2 types) Main specifications: FE167E: impedance 8 ohms minimum resonance frequency 50 Hz playback frequency band to 22 kHz output sound pressure level 94 dB input 65 w effective vibration radius 6.5 cm magnet weight 362 g weight 1.32 kg system external dimensions W350 x H490 x D256 mm 8.4 kg
Manufacture:knosti
Price: JPY 5,455
- description
- What an analog cleaning type LP cleaner that is cleaned by manually rotating the disc in a circle. A brush is attached to the inside of the main unit to scrape out dirt from the grooves. There are hardships, such as being hard to spin, getting your hands dirty, etc., but it seems to be a fun cleaning job. The drying stand is missing. We cannot guarantee the quality of the included cleaning solution (Murakoshi Yoichi) Accessories: special cleaning solution, label protect cover, filter funnel, original box, instruction manual (German) Main specifications: W336 x H182 x D84 mm 2.2 kg
- description
- *Currently sold. The output has been changed to an RCA female terminal. FR MC boost transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching the impedance of 10 to 30 ohms, there is also a bypass position, so it is compatible with various cartridges without taking up much space. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.21 Operation confirmed Accessories: copy of instruction manual, connection cable Main specifications: impedance 10 ohm/30 ohm/PASS playback frequency band 20 Hz to 30 kHz W64 x H64 x D105 mm approx. 455 g
- description
- Maintained! MC boost transformer optimized for SPU. The sound creation that is only slightly distorted with a small transformer embodies superb music playback by connecting the SPU. There are scratches, dirt, and tape marks on the exterior (Hiura Katsuji) Maintenance information: 2024.5.22 maintenance (terminal adhesive fixed wiring repair, voice check) Accessories: original box Main specifications: input impedance 2 ohms to 3 ohms boost ratio 60 times weight 70 g
Manufacture:McIntosh
Price: JPY 543,636
- description
- Carefully maintained, including replacing glass panels with new ones! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The legs are alternative rubber feet (adhesive). You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.25 maintained (vacuum tube cover, replacement, front panel replacement, 0.01 μF, etc., replacement, 6 electrolytic capacitors, 40 μF replacement, resistance, 1 W and 1/2 W replacement, 8 switching noise improvement measures, 1/4 W, 6 additional resistors, vacuum tube socket and RCA jack, re-caulking repair, etc. Operation checked with AC 100 to 117 V (if you are concerned about sound leakage when volume is minimal, on the top Please narrow down OUT LEVEL)) Accessories: copy of instruction manual Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
- description
- Maintained by the manufacturer! Yamaha's pre-main amplifier equipped with a floating and balanced amplification power amplifier using a MOS FET. A screw fastening system is used for the connection, and thorough consideration has been given to low impedance. Equipped with a phono equalizer with MC head amplifier. The smoothness and strength of the sound are perfectly balanced, and no source is selected from records to high-resolution sound sources. The appearance is good, with a slight dullness. There are a lot of scratches on the remote control (Kobayashi Hitoshi) Maintenance information: 2024.5.21 Maintained (replacement of power supply related resistors, etc. in the main board and INPUT board. Operation check confirmation) Accessories: remote control, instruction manual, power cord Main specifications: output 90W+90W (8Ω) 150W+150W (4Ω) input 7 systems (phono MM/MC) dimensions W435 x H157 x D463 mm weight 23.4 kg
Manufacture:JBL
Price: JPY 661,818(pair)
- description
- Full maintenance on every detail, from exterior to unit maintenance and terminal cleaning! 16 ohm specification! An old JBL status model equipped with 075 and D130. The American sound, which boasts outstanding sharpness, has been restored to the present day. A vintage with very well-defined parameters, which can also be seen from the size of the enclosure. It makes me think that excellent is a word for this product (Kobayashi Hitoshi) Maintenance information: 2024.5.25 Maintained (exterior repair/polishing/clear finish Front and rear baffle repair, paint saran net cleaning, foot polishing (Woofer maintenance: terminal cleaning/screw replacement tweeter maintenance: horn polishing, terminal cleaning network maintenance: frequency characteristic check, ATT cleaning, terminal/vise cleaning) Accessories: none Main specifications: tweeter+full range configuration unit 075 (16 ohms) +D130 (16 ohms) +N2600 W600 x H640 x D400 mm (legs included)
- description
- Maintained. With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi) Maintenance information: 2024.5.25 maintained (terminal replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 7000 Hz check OK) Accessories: none Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- ※Since it is a commercial device, there is no problem with the as-is operation, but since there is no guarantee, it is inexpensive. The sound quality is clean, fresh, and light, and the sound is firm and crisp. The sound development is such that the image that comes to mind when using the word YAMAHA for commercial use fits perfectly. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.21 Operation confirmed Accessories: copy of instruction manual, power cord Main specifications: stereo output 105W+105W (4Ω) 100W+100W (8Ω) bridge output 210W (8Ω) frequency characteristics 20Hz-50kHz damping factor 200 input terminal XLR, phone, output terminal 5WAY binding post power consumption 150W W480 x H880 x D456mm 12 kg
- description
- Victor's AV selector 4 inputs 1 output The exterior has a feeling of use such as dirt, scratches, and smudges (Kanai Hidetsugu) Maintenance information: 2024.5.23 continuity confirmed Accessories: none Main specifications: W169 x H40 x D78 mm 200 g (actual measurement)
Manufacture:HyuGer
Price: JPY 36,182
- description
- This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.22 continuity confirmed Accessories: instruction manual, connection cord Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
- description
- ※It is inexpensive because it has a lot of feeling of use. A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. The exterior has a feeling of use such as fading due to aging (Kanai Hidetsugu) Accessories: none Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
- description
- A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources. There is a feeling of use on the exterior, such as minor corrosion and dullness (Kanai Hidetsugu) Maintenance information: 2024.5.21 continuity confirmed Accessories: none Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Manufacture:不明
Price: JPY 5,455(pair)
- description
- Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. There is a feeling of use, such as line scratches scattered on the top plate (Kanai Hidetsugu) Accessories: none Main specifications: main body W400 x H220 x D350 mm 5.8 kg (actual measurement) top plate W360 x D320 mm (actual measurement)
- description
- Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. There are no visible scratches on the exterior, etc., and it is good with a slight dullness from the age (Kobayashi Hitoshi) Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK) Accessories: copy of instruction manual Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
- description
- Comes with a 2447 special horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.24 Operation confirmed Accessories: stand Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
- description
- The price has been drastically reduced. 2024/5/25 sales price 248,000 yen It now uses Alnico, which can be called premium, and the tuning that emphasizes musicality that is comfortable to listen to throughout the entire area makes a good impression. The visuals are also compact and elegant, and have a sense of luxury. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.25 Operation confirmed Accessories: saran net, jumper cable Main specifications: 2WAY sealed 35mm pure silk ring diaphragm tweeter 170mm Kurt Mueller cone woofer rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover 3,500 Hz playback band 40 to 50,000 Hz W224 x H380 x D319 mm 10.8 kg
- description
- Maintained! Although it is a transistor amplifier, it has a warm sound like a vacuum tube with a faint scent. While it is glossy, it is also strong, so you can use it with any speaker. Exterior, dullness, scuff marks, rust, corrosion, etc. can be seen (Kobayashi Hitoshi) Maintenance information: 2024.5.25 Maintained (main amplifier circuit fault repair fuse replacement. Switch and volume affinity correction) Accessories: none Main specifications: 80W+80W (8Ω) W466 x H181 x D378 mm 15 kg
- description
- *Remote control is out of stock. Maintained! Onkyo's unique supercurrent amplifier configuration is used for the power section, and the smooth sound is impressive with a circuit that combines a MOS FET and a bipolar transistor. The sense of power in the low frequencies and the extension in the high frequencies play a slightly different sound from the others. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.25 Maintenance completed (switch disassembly, contact polishing, contact cleaner application. Soldering correction for each circuit board) Accessories: instruction manual Main specifications: 80W+80W (8Ω) W455 × H170 × D430 mm 17 kg
- description
- 8000 Hz network for high range It can also be used in combination with JBL 077 or when combining a full range with a tweeter. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi) Maintenance information: 2024.5.25 maintained (terminal terminal deterioration replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 8000 Hz check OK) Accessories: none Key Specifications: 2 Way Variable Level Control Crossover Frequency 8kHz 8Ω Weight 0.9 kg
Manufacture:Rega
Price: JPY 27,091 Sold Out
- description
- The fact that it is compatible with various cartridges with a counterweight setting, such as being mounted on a Michell Engineering analog player, seems useful. The general counterweight is 85 106 131 grams. The cost performance is high. You can see a feeling of use such as appearance, dullness, abrasions, rust, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.25 continuity confirmed Accessories: instruction manual, original box Main specifications: Cartridge weight 2.5 to 15.5 g (including cartridge mounting screws)
- description
- ※The output has been changed to an RCA terminal. 15th anniversary limited edition model of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5,21 operation confirmed Accessories: Connection cable (external product) Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
Manufacture:GRADO
Price: JPY 40,909 Sold Out
- description
- Maintained! Grad's rare wooden tonearm, which received rave reviews in stereo sound magazines, is now in stock. The beautiful curves and sleek design of the gunstock type walnut are excellent, and it is an arm that is the cornerstone of the Fifty's Sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.25 maintenance completed (arm side lead wire shell terminal solder repair output terminal 5P connector RCA terminal replacement cartridge installation simple check conductivity check) Accessories: none Main specifications: Dynamic balance type 0.5 kg (actual measurement)
Manufacture:ALTEC
Price: JPY 27,091(pair)
- description
- ※There is slight distortion, but I don't mind playing music. Altec's 10cm full range unit is rarely in stock. An ALTEC unit with an orthodox design suitable for bass reflex. Please enjoy the speedy sound unique to ALTEC. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.21 operation confirmed (slight distortion, no problem with music playback) Accessories: instruction manual, gasket Main specifications: inch screw pitch, 120 mm, playback frequency characteristics, 130 to 14,000 Hz, efficiency: 94 dB, impedance: 7 ohms, weight: 0.8 kg
- description
- DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. ※The dowels on the saran net are tight and difficult to remove, but this is the current situation. There are small scratches, saran net marks, and some stains on the base. Serial 9541340/9541340 (Takasaki Atsushi) Maintenance information: 2024.5.23 sound output confirmed Accessories: saran net, jumper, spike, spike holder Main specifications: 3-way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
Manufacture:TAOC
Price: JPY 81,636
- description
- Set of 4. Popular TAOC speaker base This stand is the best match for those using large speakers such as 4343. Uses high-carbon cast iron. There is no logo, there are scratches and stains (Takasaki Atsushi) Accessories: none Main specifications: W120×D400×H200mm 14kg/bottle
Manufacture:進工舎
Price: JPY 31,818(pair)
- description
- Tannoy rectangular yoke type enclosure by Shinkosha, a popular domestic box manufacturer. It is attractive because it is made to sound good. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi) Accessories: none Main specifications: W597 x H108 x D37 mm weight 30 kg
- description
- The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi) Maintenance information: 2024.5.24 sound output confirmed Accessories: none Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
