Maintained! A popular model from late Sansui. While promoting wider range, the sound that feels the depth and energy unique to the company is compatible with modern speakers. The punching power in the mid to low range that drives a medium bookshelf speaker is truly a word. There is a feeling of use such as dullness and abrasions (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/TONE, loudness, subsonic, processor, input selector, power amplifier direct, source direct, tape, reckout switch disassembly, polishing grease application, output relay replacement, power supply capacitor replacement, solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 90W+90W NEW HYPERα-X balance circuit PHONO (MM/MC) power amplifier with direct function W430 x H162 x D452 mm 18 kg
Speaker with active servo technology A powered speaker with a built-in power amplifier in the woofer (only the woofer part requires a power source to drive). The medium and high frequencies, which are typical of Yamaha, remain the same, and the low frequencies also come out well. It has a good balance and can be used regardless of genre (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual
Main specifications: 4 way, 3 speakers, bookshelf type, W340 x H700 x D337 mm, 30 kg/1
There is no problem with the operation, but it will be handed over as is. Yamaha subwoofer. You can easily enjoy powerful sound. The high-cut filter allows you to listen in the desired range, so the range of uses also expands. The exterior has a slightly raised part on the top plate, and there is a scratch on the back corner (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: A-YST method anti-magnetic amplifier output 250W playback frequency band 20Hz to 160Hz high-cut filter frequency 40Hz to 140Hz continuously variable W340 x H432 x D370 mm 17 kg
Maintained! A high-performance preamp developed by Onkyo in the early 1980s. It is equipped with 3 types of cartridge selectors for 2 Phono inputs, making it a great specification for analog users. The way the dry mids sound is reminiscent of the sounds of the 60s and 70s. There are conspicuous line marks on the top plate and dents on the corners (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/indicator lamp replacement, mode, recoup, input selector, cartridge selector, subsonic switch disassembly, polishing grease application, operational amplifier replacement, solder repair, each volume, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: input LINE3 system PHONO2 (MM/MC) system power consumption 26W dimensions W450 x H990 x D403 mm weight 9.5 kg
The tweeter on one side has been replaced! The successor model to the super popular “IKON Series.” It is equipped with a unit that uses wood fiber cone paper. The mid and low frequencies are rich, and the high frequencies sound smooth. You can feel the depth of the sound clearly (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: original box, jumper plate
Main specifications: 3 way 4 speakers, frequency characteristics, 39 Hz to 30 kHz, crossover 700 Hz, 2.6 kHz, 14 kHz, efficiency 89 dB impedance 6 ohms size W188 x D352 x H1028 mm weight 17.8 kg
※There is no problem with operation, but it is currently sold because it is cheap. It uses a custom-designed S3 servo that specializes in CD rotation speed, makes it possible to read CD data without loss, and is a CD transport that specializes in high-quality sound playback. Enjoy clear, clear sound that is clear, and clear. As for the exterior, there are dirt, small scratches, etc. on the top plate (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: output system S/P DIF · RCA · Toslink x 1 system W430 × H85 × D315 mm 4.7 kg
※Since it is cheap, it will be handed over as is. It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
D/A converter with a built-in “ES9038PRO.” This model has a compact design, is compatible with MQA, high-resolution, and DSD sound sources, and has excellent cost performance. Desktops etc. are the worst. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, AC adapter
Main Specifications: Input: USB/OPTICAL/COAXIAL/BLUETOOTH USB: 44.1 to 768 kHz/DSD64 to 512 OPTICAL/COAXIAL: 32 to 192 khz W100 x H62 x D192 mm Weight 0.58 kg
Denon's premain amplifier combines popularity and performance. The resolution is even higher than the previous model, and the sound quality is high and the SN is smooth, and it is a powerful machine that combines the thickness and sense of energy in the mid to low range. It works flawlessly with all genres of music. As for the exterior, there are scratches on the front and dullness throughout. Serial 031501903 (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cord
Main specifications: output 80W+80W (8Ω) PHONO input (MM/MC) size W434 x H181 x D435 mm weight 24 kg
1650 series SACD/CD player It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cable
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
It's cheap because it's in poor condition! *Currently sold. A horn-shaped tweeter that is familiar to the ear. The appeal is that it's easy to read, but it doesn't hit your ears, so you won't get tired of listening. On the exterior, in addition to a feeling of use such as dullness and small scratches, some terminals are damaged (Asaine Tomoho)
Maintenance information: 2024.5.9 operation confirmed
Accessories: none
Main specifications: horn type tweeter frequency characteristics 2.5 kHz to 22 kHz 8 ohms cutoff frequency 2.3 kHz recommended crossover 3.5 kHz efficiency 105 dB W83 x H83 x D94 mm 1.1 kg
Maintained by Electri. A new generation of performance has been achieved by adopting a powerful new microprocessor and the latest audio-grade parts. All digital inputs are integrated into separate slot-in modules, and modules can be exchanged to support future new formats. You can experience the new era of McKinn sound, which is highly transparent and spacious. The top plate is rubbed and there is a small scratch (Oikawa Tetsuji)
Maintenance information: Maintained on 2024.5.1 Electric (front display assembly replaced. Front switch damage replacement. Update the console firmware program to the latest version. Set to factory default state. Operation confirmation, other inspections)
2024.5.8 Maintained (acrylic removal on meter and display, removal of internal fog)
Accessories: remote control, instruction manual, power cable, original box
Main Specifications: Frequency Characteristics: 10Hz to 100kHz S/N Ratio: Phono (MC) 80dB · Phono (MM) 82dB · High Level 95dB · Power AMP 113dB Analog Input: RCA ✕ 5 System/ XLR ✕ 1 System/ MC/MM ✕ 1 System Each Digital Input: USB (PCM32bit/384kHz, DSD256, DXD384KHz) ✕ 1 system/TOSLINK/coaxial (24 bit/ 192 kHz) ✕ 2 systems each, MCT (CD/SACD) ✕ 1 system W445 × H194 × D476 mm weight 34.1 kg
Maintained, including the creation of a new dust cover. A record player that uses a micro belt drive system. The arm is the company's MA-505X. You can enjoy the goodness of analog with a combination of a turntable, which has a reputation for stability and good sound separation, and an arm with good sensitivity and sound. The metal part has dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.8 Maintained (motor disassembly, brush cleaning, oil application to bearings, platter bearing cleaning, internal bearing ball replacement. Arm disassembly and cleaning, bearing replacement, assembly adjustment. Electrolytic capacitors and semi-fixed resistors were replaced. Disassemble and clean the VOL for speed adjustment. Insulator created. Turntable rotation speed adjustment, arm needle pressure check. Check the sound output. Exterior cleaning, comprehensive operation confirmation inspection, new dust cover creation)
Accessories: copy of instruction manual, EP adapter
Main specifications: belt drive turntable diameter 30.6 cm, 3.2 kg speed fine adjustment range ± 3% W496 × H155 × D400 mm approx. 12 kg
It is a CD player with a nostalgic design typical of Yamaha of yesteryear. The sound is clear and delicate, and the sound field feeling in SACD playback is worth listening to. There is a sense of transparency, and you can enjoy a wide range of sounds. There are no major noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: remote control, instruction manual
Main specifications: Playback media SACD/CD/CD/RW (MP3/WMA playable) output terminal [analog] RCA/XLR [digital] optical/coaxial W435 x H137 x D440 mm 15 kg
※Dust covers are being ordered. Maintained. It is a model equipped with the SME 3009R on the LINN LP12. Compatible with everything from lightweight types to heavyweight cartridges such as SPU. Please enjoy the good balance of the large number of sounds unique to analog, the separation of tones, and the profound thickness. There are scratches and dullness on the exterior (Tamura Eiji)
Maintenance information: 2024.5.8 Maintained (replaced due to power circuit electrolyte condenser fluid leakage and deterioration. I checked the arm operation and sound. (*33 rotations only)
Accessories: There are no accessories.
Main specifications: 3009r/static balance type short type needle pressure 0 to 5g compatible cartridge weight 9.5 to 22 g LP12/W445 x H140 x D356 mm 10.5 kg
Hi-Fi is in stock for the first time! MM cartridge that uses a boron cantilever and a solid oval needle. It is a delicate tone that is well-balanced from high to low frequencies. The degree is good. (FUJISAWA KOSHI)
Maintenance information: 2024.5.8 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: mm cartridge output 3.0 mV frequency characteristics 20 Hz to 20 kHz needle pressure 1.3 to 1.8 g dead weight 6.7 g
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001612044 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001225830 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, square peeling, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
※1 bottle only. Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, dullness, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
The dust cover is out of stock, so it's cheap. The mk4 model is a classic Technics analog player. It is a 78-rotation compatible and cable detachable model, which is rare in the 1200 series, and has strong consumer elements. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: copy of instruction manual
Main specifications: Direct drive, quartz control, rotation speed 33, 45, 78 rpm, tone arm, universal S-shaped static balance gimbal suspension system, needle pressure adjustment range 0 g to 4.0 g, W453 x H162 x D360 mm, 12.5 kg
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. It is dull and has a feeling of use. Serial 646494 (Fujisawa Yukishi)
Maintenance information: 2024.5.7 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
B&W bookshelf sized speakers It is equipped with a Nautilus tube and Kevlar cone unit from the higher series. This size is sufficient for clean mid to high ranges and low frequencies without any habit. It goes well with modern sauces. The jumper plate is dull, and there is a small scratch on the upper corner (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual
Main specifications: 2 way 16.5 cm woofer 8 ohm bi-wiring connection possible W204 x H356 x D244 mm 6.1 kg
The dirt, tobacco smell, and feeling of use are conspicuous, so it is currently sold. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
※The remote control is out of stock, and it is currently sold because it is cheap. Sansui's 14-band split equalizer. It's a playful product with a detachable remote control that fits on the front panel. The band is divided into 14 bands, and left and right adjustments can be made independently or simultaneously (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual
Main specifications: W430 × H111 × D303mm 4.1 kg
※ Because it is cheap, it is currently sold. Switchable tone controller. You can adjust the low and mid high range tones according to the frequency characteristics of the system (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual, power cable
Main specifications: variable frequency low range 30/60/120 Hz, medium and high frequency range 5K/10K/15 kHz
This is an MM cartridge used in Pioneer record players such as the PL-12, PL-12E, and PL-A20. The sound quality is straightforward without any habit, and you can use it easily.
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: mm type output voltage 5 mV needle pressure 2.5 to 3.5 g playback frequency band 15 Hz to 20 kHz dead weight 6.8 g
※Since the phono module has been replaced by an external manufacturer, it is inexpensive. Although it is a replacement module, surprisingly, it is comparable to the original LD2. The most famous Mark Levinson preamp. Mid-spectrum winding volume that demonstrates outstanding sharpness. It has vivid and energetic sound quality. The ability to listen with plenty of dynamism has an appeal that cannot be obtained with current preamps. There is a scratch on the wood cabinet and peeling on the back. Serial 1677/0818 (Sasaki Shota)
Maintenance information: 2022.9.15 Maintained (replacement of all domestic capacitors and deteriorated capacitors in the power supply unit, replacement and re-encapsulation of operational amplifier IC defects in the RCH peak meter module, disassembly cleaning for main volume and input volume, external cleaning, operation inspection of attached cables, specification inspection, inspection of each operation. (PHONO contains an alternative module, but there is no operation problem)
Accessories: power cord, connection cord, 3 sets of Remo pins
Main specifications: Phono MM2 system [main body] W482 x H113 x D354 mm approx. 5.5 kg [power supply unit PLS-150] W102 x H113 x D257 mm approx. 2.5 kg
The price has been drastically reduced. 2024/5/6 sales price 118,000 yen Roon Ready, network player compatible with MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. When used as a USBDAC, DSD 22.5 MHz can also be played. Equipped with volume, it can also be used as a digital preamp (Daiki Goto)
Maintenance information: 2024.5.6 operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
Comes with original box! Currently sold. The urethane inside has deteriorated, so it has been removed. Stax headphone and amplifier set. You can enjoy a very grainy and fresh tone. (Sasaki Shota)
Maintenance information: 2024.5.6 operation confirmed
Accessories: original box
Main specifications: Playback frequency band 30 to 35,000 Hz sensitivity 94 dB SRD-7MK2: W73 ✕ H120 ✕ D215mm weight 1.5 kg
The body is SPU-G, but the needle tip has been replaced with an SPU Classic GE mk2. An SPU that fully conveys the appeal of analog. It is a cartridge that combines the softness of the classic series sound with the strong flavor (Sasaki Shota)
Maintenance information: 2024.5.6 sound output operation confirmed
Accessories: original box (for SPU GE ClassicMK2)
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude Elliptical (elliptical needle) suitable needle pressure 4 g
Convenient digital needle pressure gauge. It is an excellent product that can measure up to 5g with a high accuracy of 0.01 g. (FUJISAWA KOSHI)
Maintenance information: 2024.5.6 operation confirmed
Accessories: No accessories
Main specifications: 5g dead weight
*Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 017958921760022AC, 017958921760021BC (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
* Distortion was confirmed during the sweep check, but since it is at a level where there is no problem with the music signal, it is currently sold. I made my own saran net. A mellow, soft tone that feels good to the ear. The size is also easy to handle and I think it's easy to use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed (distortion occurs during sweep, but this is a level where there is no problem with the music signal)
Accessories: saran net
Main specifications: 2 way 2 speakers, bookshelf type, dumped bass reflex system, playback frequency 32 to 20,000 Hz, impedance 8 ohms, efficiency 88 dB, maximum input, 35 W, W290 x H500 x D250 mm, 9.25 kg
Vintage German speaker with Alnico magnets. A tasteful character that reproduces the good sound quality of a dry texture. If you play it with a vacuum tube amplifier, it seems that you can expect even more sexy and glossy sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: saran net
Main specifications: sealed 2-way full range+ tweeter with Alnico magnet W257 x H470 x D165 mm 5.5 kg (actual measurement)
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
Pair tube, CV25 equivalent tube, VT-4C/211 compatible ball, large triode tube, molybdenum plate (zirconium coating), measured IP value: 45/45 mA (the best reference IP value for this amplifier is 50 mA) with white box ※ sound is checked with a test amplifier, plate current values have been measured, and it has been determined that operation is good (Kojima Yosuke)
Accessories: white box
Vacuum tube graphic equalizer in the ONTOMO MOOK appendix. 5 bands (55, 220, 880, 3.5 k, 14 kHz) can be adjusted by ±8 dB. It comes with an ON/OFF switch for the GEQ function, so you can play easily. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: power cord
Main specifications: input impedance: 500 kΩ output impedance: 330 Ω frequency characteristics: 20 to 100 kHz S/N ratio: 100 dB crosstalk: 80 dB or less W183 x H120 x D88 mm (including knobs and terminals)
Stereo magazine appendix. By plugging it into the USB terminal of a PC or USB-compatible DAC, etc., USB power supply/signal noise is cut and sound quality is improved (Satoshi Yonejima)
Maintenance information: 2024.5.5 operation confirmed
Accessories: No accessories
Main specifications: W20×H12×D59mm 13g
AUTOGRAPH MINI is a masterpiece in the Prestige series. Uses a coaxial unit with a diameter of 10 cm and a baht laminated plywood enclosure. You can experience the small yet well-organized British sound. The exterior is good with little feeling of use due to dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: instruction manual, original box
Main specifications: coaxial 2-way bass reflex bookshelf speaker efficiency 88dB continuous allowable input 50W maximum allowable input 200W input impedance 8Ω crossover frequency 2.3 kHz frequency characteristics 68Hz to 54kHz enclosure material birch laminated plywood enclosure surface finish/solid teak, veneer W210 x H345 x D130 mm 4 kg
Pre-main amplifier with USB-DAC. A jitter-free design that blocks input system jitter for all digital inputs, not just USB. All USB, optical digital, coaxial digital, and analog inputs are upsampled to 192 kHz/24 bit to perform excellent signal processing with high sound quality. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: remote control, power cord
Main specifications: audio format USB: DSD 2.8 MHz/5.6 MHz (DOP method) to 192 kHz/24 bit (linear PCM), OPTICAL/COAXIAL: ~ 192 kHz/24 bit (linear PCM) output 13W+13W (8Ω) digital input USB (Type B), optical, coaxial, LINE (3.5mm stereo mini plug) USB connection environment [Mac] OS9.1/OS X10.1 or later [ Windows] XP/Vista/7/8 W149×D149×H33mm 890g
Maintained! A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. In addition to the exterior, noticeable scuffs on the top plate, scratches on the VOL dial, and stains on the back of the front flap, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.16 Maintained (main volume, balance volume internal contact cleaning, cleaning. All input terminals are polished and cleaned, electrolytic capacitor replaced, PHONO2 impedance changeover switch disassembly, contact polishing, cleaning, and grease is applied. (Check the operation of each input/output)
Accessories: instruction manual (copy)
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg
※6 month warranty Although it is a small size close to ZENSOR PICO, the sound image expression and good response that do not make you feel a sense of size are perfect for current trending sounds. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2 way 6Ω 83dB W140 × H237 × D195 mm 2.6 kg
This model uses a non-feedback amplifier circuit with discrete components at all stages. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. It is attractive for its delicate expressiveness, which is smooth and has a high level of SN, typical of recent models. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: power cable
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
Unused item. Onkyo remote control for MD players. When the operation was confirmed, the light emission was confirmed, but the others were unchecked because there is no corresponding machine (Kobayashi Hitoshi)
Maintenance Information: 2024.4.28 Operation Confirmation (Light Emission Confirmation)
Accessories: original box
※Since there is a lot of deterioration in the exterior, it is inexpensive. Popular DIATONE bookshelf Metallic sounds such as wind instruments and hi-hats on drums resonate comfortably in the crisp high range, and the low frequencies are more powerful than their size. In addition to the exterior, there are many peeling veneers, and a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2-way speaker, bookshelf type, bass reflex, efficiency 89dB, impedance, 6Ω, size, W212 x H349 x D220 mm, weight 7 kg
It is a preamplifier that can obtain more satisfaction than directly connected to a power amplifier in terms of sound image positioning, bass volume, and resolution. The cost performance is tremendous, and it is the best amplifier for serious audio projects in the future. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.4 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: line input RCA x 5 · TAPE x 2 · PHONO x 1 (MM/MC) line output RCA x 2 · TAPE out RCA x 2 size W431 x H99 x D337 mm weight 7.7 kg
*Due to its low cost, it is currently sold. The solid design has an outstanding sense of luxury. At Marantz, the traditional gyro tuning dial felt the same as the Model 2600, the highest-end receiver in the past. It's a stunning tuner that combines a modern design with an analog taste. The exterior has dullness and line scratches. Serial MZMZ019842140048 (Yonejima Satoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: No accessories
Main specifications: AM stereo compatible digital synthesizer tuner HDAM configuration audio circuit gyro touch tuning W458 x H86 x D315 mm 6.8 kg
※Inexpensive because it is in slightly poor condition. Super tweeter with built-in network capable of playback up to 70kHz. You can select where to connect the high frequency range from 3 types of input. You can use it simply by placing it on top of a normal speaker and connecting it as is. The bright, clear high frequencies and carefree tone are the perfect match for JBL speakers. In addition to the exterior, there is a light float on the front baffle joint surface on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: none
Main specifications: 25mm sintered carbon graphite dome tweeter playback frequency band FC to 70kHz crossover 12kHz/16kHz/22kHz impedance 5Ω sound pressure level 90dB dimensions W190 x H130 x D130 mm weight 1.3 kg