※The remote control is missing, and there is noticeable discoloration on the side, so it's cheap. Marantz's premain amplifier with an attractive, thin, and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers are also a good match, so you can choose any music genre. On the exterior, there are stains, line scratches, paint peeling on the sides, and white marks on the power cable (Oikawa Tetsuji)
Maintenance information: 2024.5.16 manufacturer maintained (SP relay replaced. Soldering correction. (Inspection of each part and implementation of operation tests)
Accessories: power cable, copy of instruction manual
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
Maintained in December 2020! DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. There is discoloration and dullness on both channel bottom plates (Sasaki Shota)
Maintenance information: 2020.12.25 maintenance (6AN8 replacement on one side. Common block capacitor 30/20/20 μF replacement. Replace 1 x 2 film capacitors with 0.1 μF or other oil capacitors. Replace 3 x 2 Mylar capacitors with 390pF. 1 x 2 Vacuum Tube Socket and RCA Jack Caulking Repair (Other rated output: 36 to 55 W at AC 100 to 117 V, measured at SP: 8 Ω, operation check)
Accessories: none
Main specifications: tubular mono power amplifier using vacuum tube 6550/5AR4/6AN8A output 60W/140W W229 x H190 x D229 mm 11.5 kg/unit
*Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Phono cable, 1.25m, RCA-RCA type, record a wild and powerful sound! The sense of scale is conveyed in classical music, and the heat of the sound field is conveyed in jazz. The exterior is dull on the plug,
There is dirt on the sheath (Kojima Yosuke)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
A fully balanced discrete, non-feedback D/A converter using an independent mono mode that is also equipped with a NOS mode. Equipped with 2 ESS ES9038PRO In addition to being compatible with the latest high-resolution sound sources in various PCM and DSD formats via USB input, it also supports coaxial digital input (2 systems) AES/EBU input. You can enjoy more realistic and natural sounds in NOS mode. There are several dot-shaped dents on the front panel. Serial 190730008 (Fujisawa Yukishi)
Maintenance information: 2024.5.20 Operation confirmed (the mounting solder was fixed because the RCA terminal ground cap came off.)
Accessories: instruction manual, power cord, spike
Main specifications: input format (USB) PCM, DSD (DoP v1.1, ASIO) input format (coaxial/AES/EBU) PCM, DSD (DoP v1.1) compatible sampling frequency (USB) maximum 768 kHz (PCM) /maximum 22.6 MHz (DSD) compatible sampling frequency (coaxial/AES/EBU) maximum 192 kHz (PCM) /2.8 MHz (DSD64 DoP v1.1) PCM quantization Number of bits (USB) 24 bit 32 bit PCM number of quantized bits (coaxial/AES/EBU) 16 bit 24 bit USB profile USB 2.0, USB Audio 2.0 digital input USB (Type B) 2 coaxial (SPDIF) AES/EBU analog output XLR1 system RCA1 system analog output level (XLR) 5.6 Vrms analog output level (RCA) 2.8 Vrms frequency characteristics 2 Hz to 120 kHz (+0/-1 dB) S/N ratio 110 dB total harmonic distortion ratio 0.003% analog filter secondary passive power supply voltage AC 100V 50/60 Hz power consumption 40W size W430 x H109 x D379 mm weight 10 kg
The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, transport lock pin
Main specifications: analog output, RCA1 system, digital output, 2 coaxial systems, W458 x H110 x D369 mm, 11 kg
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
Accuphase F-5/F-15 crossover frequency 12500 Hz board. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: crossover frequency 12500 Hz attenuation characteristics 12 dB/oct・-18 dB/oct switchable
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
Crossover 5000 Hz board. Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
Non-switching Class A configuration mono power amplifier. It goes great with British speakers, and the fresh, rich, and powerful sound is appealing. It also has a built-in music sensing function that automatically goes into standby state (green) when the input signal is interrupted for a certain period of time, and turns on the power (red) when the signal comes back in. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cord, original box
Main specifications: 100W+100W 8Ω W160×H100×D350mm 5.0 kg
500Hz/2 way board included. Accuphase 2-way/3-way channel divider. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cable, CB500, CB-2WAY
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. An easy-to-use tuner equipped with 20-station random memory and an auto tuning function. The sound is clear and easy to hear. *TV broadcasting is compatible, but TV reception is not possible because it is a model prior to digital terrestrial broadcasting. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440×H78×D331 mm 4.1 kg
*Currently sold. There is poor contact with the balance, and there is a sound leak in the shaken part, which is the current situation. First generation of the best-selling 390 series. The compact body is equipped with a large toroidal transformer, and the sound quality is well-balanced and has a firm core at an affordable price. Recommended for those starting out with audio or those looking for a sub unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmation (input/output possible, BAL contact is faulty)
Accessories: instruction manual
Main specifications: 60W+60W speaker output 2 systems line input 5 systems with PHONO (MM/MC) W434 x H120 x D279 mm 5.8 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
The price has been reduced. 2024/5/18 sales price 178,000 yen Pickup replacement included manufacturer maintenance! It is a CD player designed with the concept of a D/A converter equipped with a CD transport. Switching is possible with the 44.1/96/192 kHz upsampling buttons. It is characterized by a comfortable sound quality that combines highly textured softness and freshness. There are dents on the exterior and front panel, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.18 manufacturer maintenance (pickup replacement, operation confirmation)
Accessories: remote control, power cord
Main specifications: CD player equipped with digital input, uses a PHILIPS VAM1201MK3 mechanism, supports upconversion to 24 bit/192 kHz (CD playback, external input) digital output/light 1, coaxial 1, W435 x H73 x D345 mm, 7.2 kg
The price has been reduced. 2024/5/19 sales price 578,000 yen Mount an SME Series V to a Michell Engineering belt drive analog player. First of all, I'm drawn to this visual! Even though it's progressive, the design feels somewhat calm. The mechanism uses a floating 3-point support suspension and high-precision ball bearings that enable pinpoint contact to prevent vibration. In terms of sound quality, the precision that comes from SeriesV's tracing skills are well combined with a stable sound field expression with a good sense of connection. In addition to white rust on the exterior and arms, you can also see a feeling of use such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 Operation confirmed (rotation is slightly faster)
Accessories: instruction manual, original box, SeriesV instruction manual, original box
Main specifications: SME SerirSV: tapered magnesium arm, dynamic balance type, effective length 233.2 mm, needle pressure range 0 to 3 g, gyrodec: belt drive, 33/45 rotation compatible, W535 x H185 x D410 mm, 15.5 kg
Accuphase power amplifier that achieved a damping factor of 700. It is an AB class stereo power amplifier that has greatly improved the performance and sound quality of the previous model, and it has both strength and subtlety, and seems to be compatible with various music scenes. The condition is generally good. Serial J2Y583 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 90W+90W (8Ω) 180W+180W (4Ω) load impedance 2 to 16Ω (in stereo) damping factor 700 (in stereo) input RCA1 system, XLR1 system, speaker output 2 systems dimensions W465 x H190 x D427 mm weight 29.2 kg
Maintained! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to a thick, analog-like sound quality that comes out well. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 21120262 (Jun Tamai)
Maintenance information: 2024.5.19 Maintained (motor bearing oil replacement deteriorated parts (electrolytic capacitor semi-fixed resistance rectifier diode) replacement tone arm disassembly/shaft bearing replacement lifter disassembly/grease up speed switching SW rotation fine adjustment volume disassembly/contact polish since the insulator has deteriorated, replaced with a replacement product turntable rotation speed confirmation arm operation needle pressure confirmation exterior cleaning sound output test (Other operation confirmation dust cover newly created)
Accessories: instruction manual overhang gauge
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
Maintenance has been completed, such as replacing capacitors and replacing deteriorated parts! It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid-high range has a different appeal from the MC275. The exterior has a feeling of use over time, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.19 Maintained (volume curing improvement treatment for TWIN, 2W oil capacitor replaced with 0.01μF, 3W oil capacitor replaced with 0.5 μF, missing thermistor, replacement, 250μF, domestic CE replacement, block capacitor 100/30 μF defective replacement, oil capacitor 0.22 μF defective replacement electrolytic capacitor 20μF, etc. Deterioration replacement resistor 2W deterioration replacement Vacuum tube socket and RCA jack caulking repairs ※ Other operation checks have been performed (measured at 41 to 58 W with rated output AC 100 to 117 V, SP: 8 Ω) ※ The power transformer groans a little, but there is no problem with performance)
Accessories: A copy of the English instruction manual
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
The price has been reduced! 2024/5/19 sales price 478,000 yen A digital processor that inherits DP-720 technology. ES9018 manufactured by ESS Technology is operated in parallel. It is especially recommended for Accuphase CD players and transports. The SN is good, the sound has good visibility, and is excellent compatibility with high resolution and PC audio. The exterior is generally beautiful, although there are small scratches on the top plate. Serial A5Y134 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual power cable
Main specifications: digital input HS-Link x 1 coaxial x 2 TOS link x 2 USB x 1 XLR x 1 USB 5.6448 MHz (1 bit 2 ch DSD) 384 kHz (32 bit 2 ch PCM) high resolution compatible dimensions W465 x H114 x D385 mm weight 14.4 kg
The shadows of sound, and the expressive power of motion and stillness are really real. The sound is delicate and clear in the high range, and the overall transparency is high. The amplifier and volume adjuster are integrated, and an “AAVA” type volume with no mechanical contact is used. Many advantages can be obtained, such as improving the signal-to-noise ratio, reducing distortion ratio, suppressing changes in frequency characteristics, and not causing left and right volume errors. The external condition is that there are fine scratches on the top plate and line scratches on the sides. Serial H7Y419 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual, power cable, remote control connection cable
Main specifications: 7 input/unbalanced (RCA) systems (however, 2 input systems can be used with an OP board attached), 2 balanced (XLR) systems output/balance (XLR), 2 unbalanced (RCA) systems each W477 x H156 x D412 mm 21.6 kg
Maintained! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The exterior has a feeling of use such as dullness and small scratches. Serial 44A12 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (main volume A curve replaced with the original vacuum tube 12AX7 noise replacement oil capacitor 0.01 μF domestically manufactured in the USA) replacement block capacitor 40/20/20/1000 μF other defective and deterioration replacement electrolytic capacitor 1000 μF additional electrolytic capacitor 40 μF other deterioration replacement switching noise reduction measures 1/4 W additional resistance 1/2 W deterioration replacement short (Additional pin vacuum tube socket, RCA jack caulk repair, and other operation checked with AC 100 to 117 V)
Accessories: A copy of the English instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
*Currently sold. JBL/UREI professional power amplifier Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. There are conspicuous abrasions on the exterior and top plate, and a feeling of use such as dullness and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
The price has been reduced. 2024/5/19 sales price 398,000 yen ※The spike holder is a non-genuine product. A premium CD player in WADIA's heyday. The transport part is equipped with a TEAC VRDS version CMK3 mechanism. The DAC section also boasts such quality that it was later made independent as WADIA 25. The biggest appeal is the sticky mid-low range, which is different from ESOTERIC's sound quality. It can also be used as a D/A converter. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: remote control, instruction manual, power cord, spike holder (external product), original box
Main specifications: Esoteric VRDS system, CMK3, D/A converter can be used, W432 x D408 x H155 mm, 20 kg
The price has been reduced. 2024/5/19 sales price 298,000 yen The successor to the company's Aleph 0s. Pure Class A amplification operation. The power supply unit has been changed and the non-feedback circuit follows the previous model. Similar to the 0s, the richness and elasticity of the Nelson Pastune has the impression that the number of sounds has increased while retaining it, making it compatible with various genres. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 sound output confirmed
Accessories: instruction manual, power cord, original box
Main specifications: execution output 60W+60W (8Ω) input impedance 25kΩ (balance) 10kΩ (unbalanced) W304 × H267 × D305 mm 20.4 kg
Maintained. The Lux tubular premium FM/AM tuner WZ-30 was developed with the aim of being the ultimate FM stereo tuner. With the warm and thick sound quality typical of a tube ball, you can enjoy broadcasting in a relaxed atmosphere. The circle of the manufacturer logo on the front is off (Oikawa Tetsuji)
Maintenance information: 2024.5.19 Maintained (2 STEREO/MONO switching relays unstable replacement, 1 μF defective and deterioration replacement, 3 FM sensitivity improvement measures → vacuum tube 6CW4 replacement 3 (using supplies) · Noise improvement measures → 2 additional 0.002 μF Mylar capacitors · FM and AM circuit IF/RF/MPX re-adjustment
(*Operation has also been checked with AC 100V)
Accessories: copy of instruction manual
Main specifications: tubular FM/AM tuner W470 x H175 x D275 mm 10 kg
Comes with a glass base An all-in-one model that uses waveguide speaker technology to achieve an immersive and powerful sound like you would experience in a concert hall. In addition to CDs and FM/AM radios, you can wirelessly play music stored on your smartphone or tablet such as an iPad. Using your home Wi-Fi network, you can enjoy internet radio from around the world with just one touch. Operation and installation are simple and easy. It is in good condition (Oikawa Tetsuji)
Maintenance information: 2024.5.19 Operation confirmed (CD playback, remote control OK)
Accessories: remote control, instruction manual, power cable, FM antenna, glass base
Main Specifications: Wireless LAN: IEEE 802.11b/g/n Network Playback Sound Format: MP3, WMA, AAC, FLAC, Apple Lossless External Dimensions W368xH142xD221mm Weight 4.5 kg
Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
The next generation model of the L-550AX has been reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. It is a practical modern machine with enhanced resolution while acquiring the glossy and dense sound unique to pure A class amplification systems. The exterior is good with no conspicuous scratches. Serial G60500154 (Yonejima Satoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
The price has been reduced! 2024/5/19 sales price 218,000 yen As a successor to the T-1000, this FM stereo tuner digitized the main circuit part. The T-1000, which became a hot topic due to its astonishing high SN, has been further upgraded. The realistic sense of realism is unrivaled. The station button can store 10 stations. The exterior is good with no noticeable scratches. Serial J6Y807 (Yonejima Satoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: frequency characteristics 10 to 15,000 Hz output/unbalance (RCA) 1 system balanced (XLR) 1 system digital output/coaxial 1 W465 x H150 x D393 mm 13.6 kg
A record player equipped with a Bluetooth (R) function and a USB output terminal. It can be connected to a Bluetooth (R) compatible wireless speaker, etc., and is recommended for those who want to enjoy a record player casually. As for the exterior, there is a thread on the dust cover. Serial 1007740 (Tamura Eiji)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: AC adapter, EP adapter
Main specifications: W516 × H198 × D433m mass 5 kg
The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
The price has been reduced! 2024/5/18 sales price 7,000 yen ※There is no problem with operation, but since it is cheap, it is being handed over as is. A speaker that uses a silk OMF diaphragm. The response is fast, and the mid to high range sound is produced well. The impression is that it is suitable for female vocals, jazz pianos, etc., and has a luxurious real wood veneer finish. Serial 5990510607/5990510607 (Tomoho Asaine)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex, 4 ohms, frequency band 45 Hz to 35000 Hz, W180 x H305 x D270 mm, 5.1 kg
Genuine RF Enterprise with side panels Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a thick, supple sound reminiscent of a record, and the intensity of the mid-range is outstanding among many CD players. There are no visible scratches on the exterior, etc., and it can be said that it is good over time (Kobayashi Hitoshi)
Maintenance information: 2014.6.12 maintained (back UP battery fluid leak, poor insulation → battery removal, insulation treatment, supercapacitor replacement, other analog part bypass C, coupling C replacement, front button all dismantling, contact all polishing, operation check)
Accessories: instruction manual, power cord
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
The price has been reduced. 2024/5/18 sales price 130,000 yen A Sony ES class stereo integrated amplifier aimed at high quality music playback. We are particular about high-resolution playback, and are reviewing basics such as high-capacity power supplies and high-rigidity symmetrical chassis. Also, there is impedance switching for headphone users, making it convenient as a high-end headphone amplifier. The sound quality is clear and clear. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: audio input RCA x 4, XLR x 1 (No. 2 HOT) practical maximum output 120+120W rated output 80+80W, speaker compatible impedance 4 to 16 ohms, W430 x H130 x D420 mm, 17 kg
Scarce! Vintage join Made In GDR (former East Germany) 20cm full range speaker. I immediately rang it at the storefront. It's an old full range speaker, so to be honest, the high and low frequencies don't come out at all compared to modern speakers, but the old piano trio is a perfect match and the mid-range is rich. The speaker has an attractive, soft, and deafening sound without making a harsh sound. There are scratches on the corner of the cabinet, and there are small scratches and line scratches overall (Sasaki Shota)
Maintenance information: 2024.5.18 Sound output operation confirmed
Accessories: none
Main specifications: 20cm full range 5Ω W315 x H525 x D210 mm 9.1 kg (actual measurement)
※For business use, it will be handed over as is. Although it has a compact body, it is a professional power amplifier that can output 60 W/channel with an 8 ohm load. The driving power that easily drives small to medium class speakers is attractive. It can also be used as a 200W/8Ω mono amplifier with a bridge connection. The exterior is dull. Serial 2B-213896 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W W482.5 x H44.4 x D254 mm 8 kg
It is a DIGIMASTER X64.4 linked to the famous 2000SH4 series. The thick, elastic sound unique to WADIA's heyday is attractive. It is a high-end aircraft of the time with high musicality, and also has intense colors. The exterior is dull. The exterior has scratches, etc. Genuine AXISS Serial 1 2011-90 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: copy of instruction manual, power cable, connection cord
Main Specifications: Sledgehammer Buffer Drive Resampling Rate 64X Resolution 18 Bits CPU Power 72 MIPS Sampling Frequency 32/44.1/48kHz Input: 2 Coaxial (BNC) Systems, 2 Optical Systems Output: 1 Unbalanced (RCA) System, 1 Balance (XLR) System W486 x H89 x D381 mm Weight 12 kg
※1 bottle only. Woofer for the famous Japanese instrument 2S-305. The Alnico magnet makes a pleasant low frequency. How about for repairs or for a new system? The urethane part is defective due to deterioration. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: No accessories
Main specifications: Alnico magnet, 30 cm, 8 ohms, 20 W, 40 Hz to 1500 Hz, diameter: 313 x depth: 168 mm, weight: 8.5 kg
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
Limited edition model commemorating the 50th anniversary of the release of the SL-1200 series. Beige color type. It is a 50th anniversary design that keeps the basic performance of the SL-1200MK7, has a gold tone arm in 7 color variations, and a plate with the “50th Anniversary” inscription and serial number engraved on it. With the main unit switch, 78 rotations and reverse rotation playback are also possible. The dust cover hinges are not original. Serial GM2JA001051 (Tomonori Asaine)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: manual, power cord, phono cable+earth wire, original box, slip mat, dust cover
Main specifications: 33/45 rotations (78 rotations are set with a changeover switch) universal S-shaped tone arm static balance type applicable cartridge mass 5.6 g to 12.0 g/14.3 g to 20.7 g (including headshell) W453 x H169 x D353 mm approx. 9.6 kg
Piezoelectric film super tweeter. With ultra-high frequency playback up to 120 kHz, I get the impression that you can hear the ultra-high range, realism, and even breathing. The exterior has a feeling of use such as dullness and small scratches (Tomoho Asaine)
Maintenance information: 2021.4.22 operation confirmed
Accessories: instruction manual, connection cable, AC adapter adjustment CD
Main specifications: Tweeter part: W125 x H88 x D93 mm body: W120 x H60 x D260 mm
*The HDD has been changed to an SSD (2TB). This is a black model that has upgraded the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved commerciality. Equipped with a dedicated USB-DAC connection terminal, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. A newly selected 3.5-inch quiet drive is mounted on a floating silicon bush to improve sound quality. There are scuff marks and dirt marks on the exterior. Serial 40300161000139 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: power cord
Main specifications: storage capacity 2TB (2TB SSD x 1) input/output terminal USB 3.0 x 3 (import/capacity expansion/backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV · AIFF · FLAC · ALAC · DSF · DFF sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8 /5.6/11.3 MHz (DSD) compatible bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
A passive attenuator that uses DALE NS-2B, a non-inductive wire winding resistor. The input impedance is 10 kΩ, and the maximum attenuation is possible to approximately -58 dB. The 23-contact VOL can be attenuated at approximately -2.5 dB. It has a careful finish that focuses on solid aluminum knobs, internal wiring, and even each part. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: W112 x H68 x D155 mm (including knob terminals)
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches, line marks, etc. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
C-Quenze series woofers are in stock from Danish Audio Technology. Strong magnets are combined with soft edges and dampers to produce an amazingly rich finish and firm bass. Serial 26877, 26883 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: aperture: 15 cm, impedance: 8 ohms, output: 120 W, efficiency: 88 dB, outer diameter: 155 mm, depth: 74 mm, opening dimensions: 131 mm, weight: 2.0 kg