Maintained! A must have for SPU fans. It is a model loaded with 2 Type0.32m/No. 6600 JS transformers, and the characteristics of the Ortofon/SPU series are fully brought out, and the depiction of vividness rich in thickness and stickiness is amazing. The exterior has peeling paint, rust, and a dull feeling of use (Katsuji Hiura)
Maintenance information: 2024.3.25 (each replaced due to maintenance switch disassembly contact polishing cleaning RCA jack HOT side deformation and grommet deformation
I checked the voice.)
Accessories: none
Main specifications: boost ratio 31 times, primary impedance 1.5 ohm/secondary impedance 1.5 kΩ, dimensions W90 x H65 x D80 mm, weight approx. 400 g
Disposal prices have been reduced. Member discounts will not be applied. 2023/11/27 sales price 20,000 yen arm base that can be used with PD-171AL. The arm can be mounted with the Ortofon AS-212D AS-212S. Heavyweight arm base made of 20mm thick brass with a chrome-plated spin finish. If you're thinking about replacing your arm, don't miss it! There are no noticeable scratches on the exterior (Kobayashi Hitoshi)
Accessories: instruction manual, original box, wrench
Main specifications: brass, chrome plated, spin finish, diameter 105 x height 20 mm, mass 1,105 g
※Since there is no main unit, operation has not been checked. Replacement needle for Ortofon F150MK2 This is an elliptical diamond needle. How about a spare one? The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance Information: 2024.3.24 Operation Unchecked
Accessories: original box
Main specifications: frequency characteristics 20 Hz to 20 000 Hz load impedance 47 kΩ suitable needle pressure 1.5 g
※2/3 hot replacement specification balance cable Unlike the REFERENCE series, a 1.0m pair, 7N copper and 8N copper hybrid conductor, it has a plain design but is characterized by a thick, aggressive tone. It is a bargain because the plug is dull, paint floats, and there is rust on the connector part (Mizusaki Ryo)
Maintenance information: 2023.11.24 Continuity confirmed
Accessories: none
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. Needle cover missing, slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.1.13 sound output confirmed
Accessories: none
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
The price has been reduced. 2024/3/11 sales price 3,000 yen ※1 RCA cable, 1.0 m, 6N-7N hybrid conductor, twin core structure, thick and strong mid-range, this is a hidden name cable recommended for vintage audio. The exterior has dullness, discoloration, etc. on the plug part (Jun Tamai)
Maintenance information: 2024.3.11 continuity confirmed
Accessories: none
Speaker cable 1.1 m pair terminal The company's highest-grade cable using 4 types of 8N wires with different unprocessed wire diameters. As it looks, the center of gravity is low, and it is very stable. Definitely for those who want to enjoy the majestic sound! There is a scuff stain on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable uses 0.9 m pair Y lug end - untreated 7N copper Excellent separation and an overwhelmingly high S/N ratio. The simplicity of the sound, the good localization, the texture of the strings, and the texture of the voice are amazing. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable uses 0.9 m pair Y lug end - untreated 7N copper Excellent separation and an overwhelmingly high S/N ratio. The simplicity of the sound, the good localization, the texture of the strings, and the texture of the voice are amazing. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/3/16 sales price 118,000 yen NF type phono equalizer. You can also switch between MM/MC with a single switch, and you can listen to sounds that are very easy to use and have high accuracy. Since it is equipped with a switch-linked muting relay circuit, it is also attractive that there is no need to worry about switch switching noises such as turning the power on/off. There are small scratches and dullness on the exterior (Satoshi Yonejima)
Maintenance information: 2024.3.16 Operation confirmed
Accessories: No accessories
Main specifications: input sensitivity IMP MC 250 μV/47 kΩ, MM 2.50 mV/47 kΩ dimensions W225 x H63 x D210 mm weight 1.4 kg
Digital RCA cable 1.0m perfect digital cable for visual equipment. It is a neutral character without the quirks typical of an orthophone. There is dullness on the plug (Takasaki Atsushi)
Maintenance information: 2024.3.17 sound output confirmed
Accessories: none
Few 1.0m pairs of RCA cables are in stock! An RCA cable that uses ultra-pure silver 6N (99.9999%) conductors, uses the finest rhodium-plated connectors, and has a highly pure, clear sound that is dull on the plug. There are abrasions (Kojima Yosuke)
Accessories: none
It was the highest model of Ortofon MI cartridges at the time. The clear, wide-ranging high frequencies and expressive low frequencies are attractive. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.26 sound output confirmed
Accessories: none
Main specifications: Mi type output voltage 5 mV needle pressure 1.0 to 1.6 g (optimal 1.3 g) playback frequency band 20-20,000 Hz load resistance 47 kΩ dead weight 5g
SPU-GE reprint model, popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. Serial 834917 (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: stylus cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
Comes with original box! This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: instruction manual, original box, needle cover, mounting screw, brush
Main specifications: mm type output voltage 5.5 mV frequency characteristics 20 to 25,000 Hz internal resistance 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
Lots of accessories! The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments, etc. There is a feeling of use on the exterior, such as dullness and scratches on the body (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: instruction manual, original box, lead wire, simple needle pressure gauge, brush, needle cover, mounting screws
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g
SOUND BOX DOUBLE ARM CABINET FOR GARRARD301 A must-see for 301 users! Starting with the arm base for SME, Ortofon, etc., a spare base is also attached, so you can mount an arm of your choice. If you've been looking for one, please take this opportunity! The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Accessories: arm base
Main specifications: W560 x H100 x D467 mm 6.5 kg (actual measurement)
This is an arm base for THORENS TD124 with unknown details. OrtoFon's RMA309 was mounted. There is a feeling of use due to appearance, dullness, mounting scratches, etc. (Kobayashi Hitoshi)