Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001612044 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001225830 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/24 sales price 118,000 yen*Saran net is cheap because it is not in good condition due to missing or scratched surfaces. ATC small bookshelf The thick and powerful mid-low range is attractive. If you pair it with a good amplifier that has torque, you can enjoy it on a scale that greatly exceeds its size. There are scratches on the exterior. Serial 0819/0820 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: No accessories
Main specifications: 2 way, 2 speakers, sealed impedance, 8 ohms, size W211 x H380 x D250 mm, weight 11.4 kg
※There is magic writing, and the logo plate is out of stock, so it's cheap. Good stylus! This is the first product of Audio-Technica, an MM type stereo cartridge that became a long-time seller for its well-balanced, natural sound. (MURAKOSHI Yoichi)
Maintenance information: 2024.5.7 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 5 mV needle pressure 1.0 to 3.5 g (optimal 2.5 g) playback frequency band 20-21,000 Hz± 3 dB load resistance 50 kΩ DC resistance 450 Ω impedance 1.8 kohm/1 kHz needle tip 0.7 mil dead weight 9.5 g
The stylus is good, but since the cantilever is curved, it is inexpensive. A mono-only cartridge with a traditional 33 series body. Play mono records clearly with a pick-up that is only horizontally oriented. It has vertical compliance and is optimized for recurrent mono editions in the stereoca era. The range is wider than Denon's DL-102 and you can feel the expansion (Fujisawa Yukishi)
Maintenance information: 2023.8.29 Operation confirmed
Accessories: needle cover
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “honeynight” impedance 10 ohms 6.9 g
*Currently sold. Slim small 2-way speaker It is an SP originally developed for AV surround, but its high quality deserves attention. It has a quality that can be used for various purposes as a sub or desktop. There are large and small dents on the exterior and the saran net on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: none
Main specifications: 2 way 3 speakers, bass reflex type, anti-magnetic type, 57mm woofer x 2, 57mm tweeter x 1, frequency characteristics, 75 Hz to 20 kHz, impedance 6 ohms, dimensions W85 x H405 x D100 mm, weight 2.6 kg
※The unit has noticeable mold spots, so it is inexpensive. It is a model equipped with a sound diffuser that can adjust directivity characteristics to the listening position while maintaining the quality and ease of use of the 101 series. On the exterior, there are scratches and mold on the unit. Serial 006855/006856 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net, diffuser
Main specifications: 11.5cm full range anti-magnetic type maximum output 150W impedance 6Ω dimensions W232 × H154 × D162 mm weight 2.2 kg
Comes with a special bracket. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has bumps, scratches, and dullness. Serial 9020409, 9020410 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: special bracket, saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/7/31 Sales price 15,000 yen*Currently sold. It is a 2.1 channel speaker system that perfectly matches Bose's unique compact, high-performance speaker technology with bass reproduction technology. You can easily enjoy simple 2.1 channels. As for the exterior, there are cracks in the woofer cabinet, overall dullness, and small scratches. Serial 990701 (Yonejima Satoshi)
Maintenance information: 2023.7.31 Operation confirmed
Accessories: no accessories
Main Specifications: Rated Input 100W Impedance 6Ω Satellite Speaker 6.0 cm Driver x 2, Antimagnetic Type, W78 x H157 x D104 mm, 1.1 kg, Subwoofer, 13 cm, 2 Drivers, W485 x H358 x D192 mm, 9.1 kg
The price has been reduced. 2024/2/20 sales price 49,800 yen 2-way bookshelf speaker system. It's the most compact speaker in the company's 600 series, yet it's second to none in terms of power and accuracy due to the new separate double dome tweeter and design improvements. It is in good condition (Sasaki Shota)
Maintenance information: 2024.2.20 sweep test good
Accessories: none
Main specifications: playback frequency 54 Hz to 50 kHz efficiency 85 dB impedance 8 ohm crossover 4 kHz dimensions W160 x H315 x D229 mm weight 4.6 kg
※It is inexpensive because there are creases on the saran net and veneer. A cost-effective bookshelf speaker from CELECTION in the UK. The large but well-organized and smooth sound quality makes you feel the sense unique to CELETION. The luster of the strings and vocals is remarkable. As for the exterior, there are creases and shrinkage on the decorative sheet. Serial 435666, 435678 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers impedance 8 ohms output sound pressure level 86 db size W185 x H310 x D 215 mm weight 5 kg
The disposal price has been reduced. Member prices are not applicable. 2023/10/23 sales price 29,800 yen ※Currently sold. Comes with a special case! Portable headphone amplifier with built-in D/A converter. DSD256 (11.2 MHz/1 bit) PCM supports native playback of up to 768 kHz/32 bit. Please enjoy the sound quality unique to a thick mojo in the mid to low range. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2023.10.23 Operation confirmed
Accessories: original box
Main specifications: output level 35 mw/600 ohm, 720mw/8 ohm, output impedance 0.075 Ω, dynamic range, 125 dB input system, 3 optical systems, 1 coaxial x 1, microUSB x 1, 2 output systems, headphone jack x 2, charging time, approx. 5 hours continuous operation time, approx. 8 hours W82 x H60 x D22 mm 180 g
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
The disposal price has been reduced! (Member prices are not applicable) 2024/4/30 sales price 328,000 yen The MK2 model has further improved its degree of perfection since the HELICON 400. A speaker where you can feel the craftsmanship of a manufacturer called DALI. Not only does the cherry color give you a sense of luxury, but the high mid-high range with a unique luster and texture is attractive. The fresh, glossy tone of stringed instruments and female vocals is one of the best in the world. There are scratches and bumps on the exterior. Serial 7720477, 7720477 (Fujisawa Yukishi)
Maintenance information: 2024.4.30 Operation confirmed
Accessories: instruction manual, spike, spike holder, jumper cable, saran net
Main specifications: 3 way 4 speakers, bass range 165 mm, cone type x 2, treble range, 25 mm, soft dome, 10 x 55 mm, ribbon tweeter, banana plug compatible impedance 4 Ω, efficiency 88 dB, W264 x H1,026 x D490 mm, weight 31.7 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. The supple sound makes it comfortable to listen to. The exterior has a feeling of use, such as dullness on the body. Serial 4126 (Hiroki Aso)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: none
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Maintained! A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. In addition to the exterior, noticeable scuffs on the top plate, scratches on the VOL dial, and stains on the back of the front flap, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.16 Maintained (main volume, balance volume internal contact cleaning, cleaning. All input terminals are polished and cleaned, electrolytic capacitor replaced, PHONO2 impedance changeover switch disassembly, contact polishing, cleaning, and grease is applied. (Check the operation of each input/output)
Accessories: instruction manual (copy)
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg
※Overall, there is dullness, rust, and scratches, and there is a feeling of use, so it is inexpensive. A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. (MIZUSAKI Ryo)
Maintenance information: 2024.1.27 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
In addition to the flat characteristics of DL-103 yuzuri, this MC cartridge is attractive for its transparency and good granularity. Amorphous boron used in high-grade models DL-1000A and 305 is used for the cantilever. The cantilever does not bend, and the stylus is good (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output 0.12 mV playback frequency 20 Hz to 60,000 Hz needle pressure 1.2 g to 1.6 g impedance 40 ohms dead weight approx. 5.6 g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
*Currently sold. Woofer edge softened A model developed with an eye on the digital age. The natural spread of sound is suitable not only for vocals, but also for classical music, etc. This is a volume-input high CP model unique to the bubble period. The exterior has a saran net hole, and the emblem is missing on one side and the other side is missing. Also, the veneer is torn. Serial 2609/12502 (Yonejima Satoshi)
Maintenance information: 2024.5.5 maintained (woofer edge softening treatment, good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed, 32 cm for the low range, 10 cm, cone type/2.5 cm for the high range, dome type frequency band 35 Hz to 30 kHz crossover 600 Hz/5 kHz sound pressure level 91 dB impedance 6 Ω dimensions W370 x H680 x D330 mm weight 21 kg/book
Woofer edge softening treatment! A classic model that uses carbon graphite for the woofer's cone paper. The high and middle ranges have a core yet are glossy, and the low frequencies are tight. It is a well-balanced speaker and is suitable for a wide range of genres. In particular, the vocals in combination with a vacuum tube amplifier are excellent. You can enjoy the enchanting diatone sound. As for the exterior, the frame has rust, scuffs, dullness, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.7 maintenance (exterior cleaning, edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
※Since there is a lot of deterioration in the exterior, it is inexpensive. Popular DIATONE bookshelf Metallic sounds such as wind instruments and hi-hats on drums resonate comfortably in the crisp high range, and the low frequencies are more powerful than their size. In addition to the exterior, there are many peeling veneers, and a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2-way speaker, bookshelf type, bass reflex, efficiency 89dB, impedance, 6Ω, size, W212 x H349 x D220 mm, weight 7 kg
* Distortion was confirmed during the sweep check, but since it is at a level where there is no problem with the music signal, it is currently sold. I made my own saran net. A mellow, soft tone that feels good to the ear. The size is also easy to handle and I think it's easy to use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed (distortion occurs during sweep, but this is a level where there is no problem with the music signal)
Accessories: saran net
Main specifications: 2 way 2 speakers, bookshelf type, dumped bass reflex system, playback frequency 32 to 20,000 Hz, impedance 8 ohms, efficiency 88 dB, maximum input, 35 W, W290 x H500 x D250 mm, 9.25 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
※It is inexpensive because it is in poor condition such as paint peeling and solder marks. Electrovoice's finest horn tweeter. It is a diffraction type unique to the Electrovoice, which is slightly larger than the T35. A phenolic diaphragm with silk as the core material, and an Alnico V magnet comparable to a scoker are used for the magnetic circuit. The exterior has scratches, paint peeling, and solder marks on the terminals. One side plate is missing (Yonejima Satoshi)
Maintenance information: 2024.5.9 oscillator test is good
Accessories: No accessories
Main specifications: playback frequency band 3,500 to 15 kHz impedance 8 ohms recommended crossover frequency 3.5 kHz or higher W73 x H191 x D125 mm 3.2 kg
Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. There is slight discoloration on the power supply part (Murakoshi Yoichi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual (copy), power supply unit, ground banana plug, short pin
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima)
Maintenance information: 2024.5.6 sweep test is good
Accessories: original box
Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
Roadie's representative 2-way speaker system. A luxurious magnetic circuit was added, and a machined aluminum horn tweeter of unusual quality for this size was used. Along with its elegant look, you can easily enjoy the thick domestic vintage sound. There are small scratches, stains, and warps on the top surface and side angles (Murakoshi Yoichi)
Maintenance information: 2024.2.17 sound output confirmed
Accessories: saran net
Main specifications: 2 way, 2 speakers, dumped bass reflex system, bookshelf type impedance, 8 ohms, output, sound pressure level, 88 dB, dimensions W360 x H610 x D340 mm, weight 22 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced. Terminal area cleaning. Attenuator SW contact cleaning. Crossover 500Hz check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
The price has been drastically reduced! 2024/3/17 sales price 69,800 yen JBL professional tweeter. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. The exterior has dullness and small scratches due to aging. Serial 81380/52416 (Yonejima Satoshi)
Maintenance information: 2024.3.17 sweep test good
Accessories: No accessories
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
The disposal price has been reduced! Members are not eligible for discounts. 2024/4/26 sales price 498,000 yen It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
The price has been reduced! 2024/4/27 sales price 39,800 yen Center speaker using the same unit as the LS60. The luxurious 3-way specification helps build a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: spike, spike base
Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg