Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced. Terminal area cleaning. Attenuator SW contact cleaning. Crossover 500Hz check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
Comes with PS-3 genuine stand sold separately! This model consists of BOSE's popular 121 small speakers and 242 woofers. The thickness of the low frequencies has been increased to 121, which has a tense sound. It plays pop and rock in a light manner. There is a dent on the stand (Daiki Goto)
Maintenance information: 2024.5.4 operation confirmed
Accessories: stand
Main specifications: 3 way, 3 speakers, Astimus system, bookshelf type, low frequency side, 16 cm, cone type, medium range side, 11.5 cm, cone type, 2.5 cm, cone type impedance 6 Ω, W310 x H760 x D270 mm, 17.85 kg/1 bottle (including stand)
A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota)
Maintenance information: 2024.5.4 sweep test good
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg
※Inexpensive because it is in slightly poor condition. Super tweeter with built-in network capable of playback up to 70kHz. You can select where to connect the high frequency range from 3 types of input. You can use it simply by placing it on top of a normal speaker and connecting it as is. The bright, clear high frequencies and carefree tone are the perfect match for JBL speakers. In addition to the exterior, there is a light float on the front baffle joint surface on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: none
Main specifications: 25mm sintered carbon graphite dome tweeter playback frequency band FC to 70kHz crossover 12kHz/16kHz/22kHz impedance 5Ω sound pressure level 90dB dimensions W190 x H130 x D130 mm weight 1.3 kg
This transformer is the best match for the company's DL-S1 and DL-103 series. You can enjoy the depth and luster of a clear, natural sound. The large amount of information unique to high-end machines brings out even the smallest details of the characters on the cartridge. Slightly dull, with small scratches (Takasaki Atsushi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: none
Main specifications: 6N wiring material compatible impedance 3 to 40 ohms 10 to 80,000 Hz boost ratio 1:13 W 150 x H70 x D 175 mm 3.2 kg
*Currently sold. Slim small 2-way speaker It is an SP originally developed for AV surround, but its high quality deserves attention. It has a quality that can be used for various purposes as a sub or desktop. There are large and small dents on the exterior and the saran net on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: none
Main specifications: 2 way 3 speakers, bass reflex type, anti-magnetic type, 57mm woofer x 2, 57mm tweeter x 1, frequency characteristics, 75 Hz to 20 kHz, impedance 6 ohms, dimensions W85 x H405 x D100 mm, weight 2.6 kg
YAMAHA bookshelf speakers. It is a high-resolution compatible model created by the designer of the “Soavo” series, which was highly acclaimed worldwide, and although it is an entry model, it is designed with particular attention to sound. Of course, the traditional high frequencies of the NS Series are excellent, and the fact that bass reflex dubbing, which is common on bookshelves, is suppressed is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex type (non-magnetic) playback frequency band 55 Hz to 45 kHz impedance 6 ohms allowable input 40 W maximum input 120 W output sound pressure level 87 dB crossover frequency 2.8 kHz W183 x H320 x D267 mm weight 6.1 kg
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. There is slight discoloration on the power supply part (Murakoshi Yoichi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual (copy), power supply unit, ground banana plug, short pin
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
Roadie's representative 2-way speaker system. A luxurious magnetic circuit was added, and a machined aluminum horn tweeter of unusual quality for this size was used. Along with its elegant look, you can easily enjoy the thick domestic vintage sound. There are small scratches, stains, and warps on the top surface and side angles (Murakoshi Yoichi)
Maintenance information: 2024.2.17 sound output confirmed
Accessories: saran net
Main specifications: 2 way, 2 speakers, dumped bass reflex system, bookshelf type impedance, 8 ohms, output, sound pressure level, 88 dB, dimensions W360 x H610 x D340 mm, weight 22 kg
※Since the cantilever is large and tilts to the right, it is inexpensive. Needle cover missing. The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments. There is a feeling of use on the exterior, such as dullness and scratches on the body (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output
Accessories: case
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g
※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
Arrived after a long time! An attractive cartridge with a strong sense of energy and quick response. It can musically express the overflowing amount of information brilliantly, and has advantages unique to high-end aircraft. There are small scratches on the exterior. Serial H2836 (Murakoshi Yoichi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: needle cover
Main specifications: MC type impedance 5.5 ohms needle pressure 1.6 g to 1.75 g dead weight 8.0 g output voltage 0.5 mV solid boron cantilever
*Currently sold. Although it is small and compact, the sound quality is truly something that can be called a celebration. The sound quality is smooth and warm, so you won't get tired even if you listen to it for a long time. Feel free to enjoy classical music and vocals. The exterior has line marks and dullness. Serial 656558, 656560 (Tamura Eiji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: saran net
Main specifications: 2-way sealed 2.5cm titanium dome tweeter 15cm woofer impedance 8Ω efficiency 88dB W206 x H350 x D250 mm weight 4.7 kg
※It is inexpensive because there are creases on the saran net and veneer. A cost-effective bookshelf speaker from CELECTION in the UK. The large but well-organized and smooth sound quality makes you feel the sense unique to CELETION. The luster of the strings and vocals is remarkable. As for the exterior, there are creases and shrinkage on the decorative sheet. Serial 435666, 435678 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers impedance 8 ohms output sound pressure level 86 db size W185 x H310 x D 215 mm weight 5 kg
Comes with a special bracket. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has bumps, scratches, and dullness. Serial 9020409, 9020410 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: special bracket, saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
※It is inexpensive because of the smell of tobacco and peeling of the decorative plate on the bottom. By applying a symmetrical weave design to the modern design, care has been taken so that sound waves are synthesized three-dimensionally between the left and right speakers. This compact speaker is designed to save space so that you can get a sense of the hall and position of a musical instrument without turning the cabinet inward. It is a model that takes the modern living environment into consideration. On the exterior, there are bumps and peeling veneer on the bottom. Serial CMB17031035, CMB17031036 (Fujisawa Yukishi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: saran net
Main specifications: output sound pressure level 87 dB impedance 7.2 ohms W226 x H336 x D194 m weight 6.14 kg/book
One owner item, in excellent condition! Comes with option base JSB-1 (90,000)! The flagship speaker DD66000 commemorates the 60th anniversary of JBL's founding. A high-end machine with a high level of freshness and modern spatial expression. In addition to the low range with a well-extruded core typical of JBL, the texture of the mid to high range is also overwhelmingly high, so you can immerse yourself in the music with peace of mind (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: instruction manual, short strap wrap, genuine spike base x 8, JSB-1 optional base x 8
Main specifications: Rosewood unit 1501Al x 2/476be/045be-1 playback frequency band 45Hz to 50kHz impedance 8Ω output sound pressure level 96dB W965 x H1,109 x D469mm (without spikes) 142 kg
Luxman's blockbuster MM/MC phono equalizer amplifier is still highly popular. Clean sound with a good S/N ratio with a 3-circuit all-discrete configuration of MC head amplifiers, RIAA amplifiers, and output buffer amplifiers. The sound with excellent gain and a sense of relaxation is attractive. The exterior has dents, small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: instruction manual
Main specifications: mm/MC independent NF type equalizer gain mm36dB MC62dB input sensitivity mm4mV/MC0.2mV compatible impedance mm10kohm or less/MC40Ω or less input impedance mm50kΩ/mc200Ω w126 × H183 × D421 mm 6.8 kg
A very rare white stamped SPU is now in stock! The light sound of the plastic shell is exquisite. The point is that the texture goes well with the plump medium sound. Even with the many SPUs, it's hard to find one with such an expressive tone. Serial 528219 (Tamura Eiji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: needle cover
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The disposal price has been reduced! Members are not eligible for discounts. 2024/4/29 sales price 348,000 yen blue saran net model! A new-generation speaker system that follows the design of the famous L100 Century machine of yesteryear and incorporates the latest technology and acoustic design. In addition to the wide range that extends well in the high frequencies, it is an all-rounder with a sufficient sense of volume in the low frequencies. You can immerse yourself in the music with peace of mind. The exterior is on the top plate, and there are light scuffs on the sides. Also, cracks in the board can be seen on the corner of the saran net. Serial CV0094-LL0002450, CV0094-LL0002465 (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, saran net (blue)
Main specifications: 3-way bass reflex crossover frequency 450 Hz/3.5 kHz output sound pressure level 90 dB nominal impedance 4 Ω playback frequency special 40 Hz to 40 kHz W390 ✕ H637 x D372 mm weight 26.7 kg (when grille attached)
Beautiful item with original box! DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
The price has been drastically reduced! 2024/4/28 sales price 1,380,000 yen The piano black is a majestic B&W802 diamond. It boasts a clear and transparent high range unique to diamond tweeters, and a medium to low range that is both tight and voluminous, and can be said to be ideal in a home environment. In particular, the three-dimensional spatial expression makes me hear it with a strong presence unique to high-end aircraft. The exterior has small scratches on the sides and dirt on the saran net. Serial 0005501/0005502 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: instruction manual, original box, spike, saran net, jumper cable (general purpose) *Ball caster missing
Main specifications: 3-way bass reflex type 25mm diamond dome tweeter 150mm warven kevlar 200mm loha selcone woofer playback frequency band 27Hz to 33kHz sensitivity 90dB impedance 8Ω crossover frequency 350Hz 4kHz size W368 x H1,135 x D563 mm weight 72 kg
Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
The price has been reduced! 2024/4/27 sales price 39,800 yen Center speaker using the same unit as the LS60. The luxurious 3-way specification helps build a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: spike, spike base
Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg
Maintained by the manufacturer! It is the origin of Sun Valley and is the most popular 845 single power amplifier kit model. Sister level 211 can also be used. Please enjoy the original appeal of hand-wired tube amplifiers (Murakoshi Yoichi)
Maintenance information: 2024.4.26 manufacturer maintenance (vacuum tube replacement L/R gain adjustment, high pressure wiring glass tube processing, solder part check, re-soldering, wiring routing correction, screw fastening confirmation, tightening, output, gain noise, etc.)
Accessories: instruction manual, power cord
Main specifications: 845/211 single 16W+16W or more (211 is 7.5W+7.5W or more) impedance 8Ω W410 x H240 x D275 mm 15 kg
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
The price has been reduced! 2024/4/27 sales price 23,000 yen This is a standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Asaine Tomoho)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
The disposal price has been reduced! Members are not eligible for discounts. 2024/4/26 sales price 498,000 yen It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2596 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
The price has been reduced. 2024/4/24 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/24 sales price 118,000 yen*The saran net is cheap because it is not in good condition due to lack of stock, scratches, etc. ATC small bookshelf The thick and powerful mid-low range is attractive. If you pair it with a good amplifier that has torque, you can enjoy it on a scale that greatly exceeds its size. There are scratches on the exterior. Serial 0819/0820 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: No accessories
Main specifications: 2 way 2 speakers sealed impedance 8 ohms size W211 x H380 x D250 mm weight 11.4 kg
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Input transformer pair sale primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W50 × H70 × D57 mm 0.75 kg/piece (actual measurement, not including protrusions) The badge is discolored, and there are scratches in places (Kojima Yosuke)
Accessories: specifications
Line transformer using TANGO's input transformer, NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70 H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/18 sales price 178,000 yen 2024/1 maintenance completed! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.1.12 Maintained (exterior repair stain tinted front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
Maintained! A network with a crossover frequency of 7 kHz. It is ideal for MID/HIGH for 3-way systems using 2440. There is a small wound (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The price has been reduced! 2024/4/11 sales price 45,000 yen Woofer edge softening treatment was completed in March 2021! The sharp mid-high range, which is typical of a diamond tone, is characteristic. The low frequency thickness unique to 30 cm is also attractive, so you can enjoy it in all genres. There are some dents on the exterior. Serial 16747/16900 (Yonejima Satoshi)
Maintenance information: 2021.3.6 Maintained (softened)
Accessories: saran net
Main specifications: 3 way 3 speaker sealed impedance 6 Ω playback frequency band 35 Hz-35 kHz crossover 500 Hz/4 kHz maximum input 230 W sound pressure 91 dB W380 x H680 x D325 mm 27 kg
※There is no problem with operation, but it is currently sold because it is cheap. A small 2-way speaker made by ONKYO. The bass reflex system allows you to enjoy low frequency playback with a compact appearance yet a sense of volume. There is slight stickiness on the front (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: 2-way bass reflex type rated impedance 4 ohms maximum input 120 W rated sensitivity level 82 dB W156 x H249 x D221 mm 4.1 kg
The price has been reduced. 2024/4/10 sales price 26,800 yen ※6 month warranty triode MM/MC compatible phono equalizer. You can easily enjoy records even with an amplifier that does not have a PHONO input. It's slightly dull (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: instruction manual, power cable
Main specifications: semiconductor circuit input impedance mm47kΩ/mc2Ω to 47Ω compatible gain mm36dB/mc55dB W90 x H100 x D230 mm 1.6 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/8 sales price 198,000 yen Maintained! Macton tubular OTL stereo power amplifier. Eight 6RA3 triodes are used in parallel per channel to enhance load impedance adaptability, and it also features a structure with Macton's unique balanced NF applied. The sound unique to OTL is thick and has a high sense of energy, and the high driving power is also attractive. The appearance is oxidized and dull. Serial 40704 (Yonejima Satoshi)
Maintenance information: 2024.4.8 Maintained (power transformer primary side rewound repair by PSE inspection. 3 vacuum tube 6RA3 replacements Vacuum tube 6AQ8 replacement. Main volume disassembly cleaning repair. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 100V (rated output 32W, SP:16Ω), please use speakers above 16Ω)
Accessories: No accessories
Main specifications: tubular low-load OTL stereo power amplifier 30W x 30W (8Ω) vacuum tube used: 6RA3 x 10/6RA8 x 2/12AX7 W370 ✕ H160 ✕ D270 mm 12 kg
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. Kanchireya is slightly to the left. Serial 21536 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The disposal price has been reduced. 2024/4/4 sales price 898,000 yen British original enclosure, equipped with 15 inch monitor gold! Refreshing York has regained its original tone through our refreshment maintenance. It is a speaker representing TANNOY that brings out the appeal of all kinds of sources. In particular, the beautiful, glossy sound in string and vocal music plays a sound that once you hear it, you won't be able to leave your ears (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/polishing/clear finish. Maintenance: net cleaning/fraying repair/repasting, sound-absorbing material removal. Unit maintenance: Magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: none
Main specifications: bass reflex system floor type 15 inch coaxial 2 way (Monitor Gold 15 inch) frequency characteristics 30 Hz to 20,000 Hz crossover frequency 1,000 Hz maximum input 50 W impedance 8 ohms size W597 x H1,070 x D375 mm
SAEC long-selling model with a 0.6 m digital cable. 6N ultra-high purity copper with excellent transmission characteristics is used as the conductor material, and transmission loss is reduced with accurate impedance matching (Tamura Eiji)
Maintenance information: 2024.4.4 continuity confirmed
Accessories: none
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg