Fidelity-Research step-up transformer A multifunctional boost transformer that can be switched from 3 ohms to 100 ohms, has 3 inputs and PASS, and can also be used as a selector for multiple record players. Each gain is equipped with an independent toroidal transformer. The exterior is dull, and there are small scratches (Oikawa Tetsuji)
Main specifications: boost transformer core format/toroidal core input impedance 3Ω, 10Ω, 30Ω, 100Ω, PASS (switching) load impedance 47 kΩ to 57 kΩ frequency characteristics 20 Hz to 30000 Hz W170 × H60 × D180 mm 1.2 kg
This step-up transformer is ideal for SPUs, etc. It is an MC transformer with excellent thickness and sense of energy, and fully brings out the characteristics of cartridges. (Sasaki Shota)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: original box
Main specifications: input impedance 2 to 6 ohms boost ratio 28 dB load impedance 47 kΩ or more channel separation 80 dB (1 kHz) dimensions W80 x H40 x D128 mm weight 400 g
Blue saran net model! A new-generation speaker system that follows the design of the famous L100 Century machine of yesteryear and incorporates the latest technology and acoustic design. In addition to the wide range that extends well in the high frequencies, it is an all-rounder with a sufficient sense of volume in the low frequencies. You can immerse yourself in the music with peace of mind. The exterior is on the top plate, and there are light scuffs on the sides. Serial CV0094-LL0002450, CV0094-LL0002465 (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, saran net (blue)
Main specifications: 3-way bass reflex crossover frequency 450 Hz/3.5 kHz output sound pressure level 90 dB nominal impedance 4 Ω playback frequency special 40 Hz to 40 kHz W390 ✕ H637 x D372 mm weight 26.7 kg (when grille attached)
Beautiful item with original box! DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Comes with original box! High compliance MC cartridges. It boasts a wide range playback capability of 60 kHz, and its sharp, energetic sound is suitable for jazz rock. The sound quality is bright and crisp, with good low frequency resolution. The exterior is dull. Serial 9700 (Yonejima Satoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: solid diamond special elliptical needle playback frequency range 20 Hz to 60 kHz voltage 0.4 mV impedance 33 Ω needle tip 0.07 x 0.14 mm square needle pressure 1.4 g dead weight 6 g
German MM/MC compatible phono equalizer. The speed of sound is outstanding. The sound quality is straight without turbidity, and the volume and power of the bass are excellent, and the rhythm band can be heard richly. It's an excellent product that also allows you to get good MC gain. There is an MM/MC changeover switch on the bottom, making it very easy to use. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual
Main specifications: 60dB (MC) 40dB (MM) input impedance 800Ω/MC, 47kΩ/mm W50 ✕ H30 ✕ D74mm 0.2 kg
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. As for the exterior, the cork around the frame has deteriorated (Mizusaki Ryo)
Maintenance information: 2024.4.28 Maintained (edge holes repaired with rubber adhesive, edge wood chips removed, center cap removed and dustproof net glued, magnetic circuit slit cleaned, rust prevention, coil bobbin center removal)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
The price has been reduced! 2024/4/28 sales price 1,380,000 yen The piano black is a majestic B&W802 diamond. It boasts a clear and transparent high range unique to diamond tweeters, and a medium to low range that is both tight and voluminous, and can be said to be ideal in a home environment. In particular, the three-dimensional spatial expression makes me hear it with a strong presence unique to high-end aircraft. The exterior has small scratches on the sides and dirt on the saran net. Serial 0005501/0005502 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: instruction manual, original box, spike, saran net, jumper cable (general purpose) *Ball caster missing
Main specifications: 3-way bass reflex type 25mm diamond dome tweeter 150mm warven kevlar 200mm loha selcone woofer playback frequency band 27Hz to 33kHz sensitivity 90dB impedance 8Ω crossover frequency 350Hz 4kHz size W368 x H1,135 x D563 mm weight 72 kg
Full maintenance from each unit to the network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. There is a scuff on the diffuser (Kobayashi Hitoshi)
Maintenance information: 2024.4.27 maintained (exterior repair, saran net replacement/frame repair, woofer maintenance: edge replacement/cone paper coating, mid maintenance: edge replacement/cone paper coating, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning, tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning, Network maintenance: frequency characteristics check, ATT cleaning, terminal cleaning, unit detaching/diffuser repair)
Accessories: saran net, diffuser
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
Refresh yourself with internal and external maintenance! A popular model with an eye-catching bright blue baffle. A titanium dome is used for the tweeter, and the sharpness in the high range is excellent. The sounds of rock, jazz, etc. are pleasant, and the sound is sharp and sharp while the bass comes out well (Sasaki Shota)
Maintenance Information: 2024.4.27 Maintained (exterior cleaning/touchup/waxed finish. Saran net cleaning/reattaching Tweeter cleaning woofer cone paper touch up ATT cleaning)
Accessories: none
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 22 kHz crossover 2 kHz/5 kHz sound pressure level 93 dB impedance 6 ohms dimensions W362 x H597 x D299 mm weight 20 kg/bottle
The price has been drastically reduced! 2024/4/27 sales price 178,000 yen rare item. Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 Inspection operation confirmed (when MC is input at 1 GΩ, ① knock down dip switch No. 2 No. 5 to the front side. It can be used by ② tilting the DIP Switch No. 1 and 6 to the front side ③ and inserting the short pin into the MM terminal). (MC input setting for current 330 ohm load) Operation was tested with each function for internal inspection of the main unit and power supply unit.)
Accessories: power supply unit, copy of instruction manual
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
Center speaker using the same unit as the LS60. The luxurious 3-way specification plays a part in building a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: spike, spike base
Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg
The price has been drastically reduced. 2024/4/27 sales price 1,680,000 yen Hi-Fi Hall first arrival! This is the flagship model of the current KEF Reference series. The expanse of the dynamic sound field and natural sound quality that can't be imagined from this 205mm wide seems to make you forget that this speaker is a tall boy. The exterior, with abrasions and scratches on one side, is dull, and there is only a slight feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: Unit used: 5 inch Uni-Q driver, 6.5 inch woofer x 4 crossover 450 Hz, 2.1 kHz 88 dB impedance 4 ohms W205 x H1,350 x D462 mm 60.2 kg
The best model in the BAT series. Cut the area below 15 kHz that can be heard by humans as much as possible, and cut the coverage with the main speaker. It has a natural sense of spaciousness and a firm, strong axle, and a light impression that is easy to remove. Thick wooden cabinets, brass horns, and brass inverted conical spikes are used to ensure rigidity and beautiful form. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: original box
Main specifications: Drive system/bimorph polymer piezoelectric hail type drive (TAT drive) maximum rating/100V (however, test signals at 20kHz or higher are up to 20V) protection circuit operates on excessive input (returns to normal after a few minutes of turning off the power) impedance/infinity ~ 140Ω to 28Ω (DC ~ 20kHz to 100kHz) playback frequency band/ 18 kHz to 150 kHz or more (18 kHz or less with a hail structure and 0.1 μF capacitor (It has been cut steeply) Maximum output sound pressure/100dB/W/m, 5-step switching W110 × H70 × D100 mm 720g
The price has been drastically reduced. 2024/4/27 sales price 148,000 yen The current studio monitor 4309 equipped with the latest sound technology has arrived. A ring radiator type compression driver similar to the higher-level model is used for the medium to high range unit. It is also highly capable as a desktop monitor. There are repair marks on the exterior and top plate, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper, manual, original box
Main specifications: 2-way bass reflex type nominal impedance 4 ohms output sound pressure level 87 dB frequency characteristics 42 Hz to 30 kHz crossover frequency 1.6 kHz W260 ✕ H419 ✕ D227mm 11 kg
Maintained by the manufacturer! It is the origin of Sun Valley and is the most popular 845 single power amplifier kit model. Sister level 211 can also be used. Please enjoy the original appeal of hand-wired tube amplifiers (Murakoshi Yoichi)
Maintenance information: 2024.4.26 manufacturer maintenance (vacuum tube replacement L/R gain adjustment, high pressure wiring glass tube processing, solder part check, re-soldering, wiring routing correction, screw fastening confirmation, tightening, output, gain noise, etc.)
Accessories: instruction manual, power cord
Main specifications: 845/211 single 16W+16W or more (211 is 7.5W+7.5W or more) impedance 8Ω W410 x H240 x D275 mm 15 kg
Orthophone mono cartridge. It's a cartridge that allows you to fully enjoy the heavy sound of a mono disc. Serial 022736 (Mizushima Itsuro)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: original box, needle cover
Main specifications: mono MC type cartridge output 3 mV impedance 100 ohms needle pressure 3.5 to 5 g dead weight 31 g
※It is cheap because it is in poor condition. Denon's MC cartridge used to be an introduction machine. The sound quality has a sense of transparency that extends smoothly from low to high frequencies without clogging. The famous DL-103 Yuzuri cartridge has a good balance of range, density, and volume. In addition to being dull on the exterior, there is a feeling of use such as the part number plate peeling off. Serial 6984 (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.3 mV internal impedance 40 ohms needle pressure 1.5 to 2.1 g special elliptical needle double structure tapered cantilever dead weight 4.5 g
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
The price has been reduced! 2024/4/27 sales price 23,000 yen This is a standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Asaine Tomoho)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: case, needle cover, instruction manual
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
The price has been drastically reduced! 2024/4/26 sales price 498,000 yen It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2596 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
※The tweeter is cheap because it has dents. A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals (Murakoshi Yoichi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: spikes, saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, anti-magnetic design, frequency characteristics, 35 Hz to 20 kHz, impedance, 4 ohms, output, sound pressure level, 90 dB, W237 x H1080 x D310 mm, 25 kg/book
Refreshment maintenance has been completed with attention to detail, such as cleaning the inside of the driver gap! The rich low range of the Alnico LE14A and the good high frequency with a dry atrium unique to the 175DLH make you hear vintage sound unique to the Lancer. The combination of a marble top plate and a beehive horn creates a tasteful sound that resonates a lot. Serial 13952 13958 (Murakoshi Yoichi)
Maintenance information: 2024.4.25 maintenance (exterior repair (polishing, oil finish, front and rear baffle/hakama repair, painting, backside fabric replacement) driver maintenance (magnetic circuit gap cleaning, center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement)
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, floor type, 35.5 cm cone type for low range (LE14A), high range horn type (LE175DLH), network LX10 impedance 8 ohms, W440 x H620 x D310 mm, 39.0 kg/1
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
G-shell oval needle model from the Herman era. The glossy, rich, and heavy sound is an appeal that never fades. It is an eternal cartridge that fully conveys the appeal of analog (Yasuhito Koshihama)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
※Since the cantilever is slightly raised, it is inexpensive. Mid-range models in the MC Star series, which come in 3 types. Both models have different sounds, and they are all unique, but 20W is a model that places particular emphasis on the mid-range. The sound is warm in tone, and has an extrusive, and comfortable sound that goes through the SPU. The wooden body made of Yamanaka lacquer, which is a traditional Japanese craft, is also beautiful.
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV suitable needle pressure 2.3 g recommended load impedance 10 to 200 ohms dead weight 10.5 g
Maintained! An exclusive popular preamp. It is packed with attention to communication from engineers, such as the quadruple attenuator volume with 22 contacts and the use of copper foil glass epoxy substrates. Oxygen-free copper wire is used as internal wiring material. The abundance of inputs, such as 3 PHONO systems and 3 AUX systems, is also attractive. The high quality, which is thick and roomy, is attractive. There are scratches and scratches on the exterior. Serial 001000885 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (all lever switch disassembly contacts polished contact grease applied due to poor lever switch contact. Rotary switch contact cleaning. Check the operation of each input/output. (Capacitors have been maintained)
Accessories: No accessories
Main specifications: 22 contact attenuator PHONO 3 system TUNER 1 system AUX 3 TAPE system 3 stage switchable attenuator dimensions W468 x H206 x D342 mm weight 12.5 kg
The price has been reduced. 2024/4/24 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/24 sales price 118,000 yen*The saran net is cheap because it is not in good condition due to lack of stock, scratches, etc. ATC small bookshelf The thick and powerful mid-low range is attractive. If you pair it with a good amplifier that has torque, you can enjoy it on a scale that greatly exceeds its size. There are scratches on the exterior. Serial 0819/0820 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: No accessories
Main specifications: 2 way 2 speakers sealed impedance 8 ohms size W211 x H380 x D250 mm weight 11.4 kg
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
The price has been drastically reduced. 2024/4/24 sales price 248,000 yen with dedicated stand DK-205! A masterpiece of Diatone. The DS-205, which makes you feel the design of yesteryear, has arrived! The small aperture woofer is played in a large capacity enclosure, and the deep sound, which also has a soft, puffy texture, is attractive. It is a gem that is highly appreciated by music fans. Compared to the R305, etc., it is one size smaller and easier to handle. There are repair marks on the side molding, front of the stand, etc., and dents and abrasions are scattered (Kanai Hidetsugu)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: dedicated stand, saran net, jumper cable (replacement)
Main specifications: 2-way 2-speaker bass reflex output sound pressure level 88dB impedance 4Ω anti-magnetic design size W482 x H700 x D362 mm weight 26 kg stand H450 x H230 x D351 mm weight 9 kg
The price has been reduced! 2024/4/23 sales price 45,000 yen*Saran net is out of stock. A smash hit by ALR JORDAN. The sound quality is outstanding at this size. The impression is that the volume does not change from low volume to quite high volume, and the sound is on a large scale not typical of a small speaker. There are small scratches and dullness. Serial 25230149, 25230149 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: No accessories
Main Specifications: 2 Way 2 Speaker Sealed Usage Unit 11.5cm Metal Cone Woofer/25mm Soft Dome Tweeter Rated Input 90W Frequency Characteristics 70 to 30,000 Hz Impedance 8 Ω Output Sound Pressure Level 86 dB (2.83 V/m) Recommended Amplifier Output 25 to 150 W Crossover Frequency 2,800 Hz Enclosure Natural Alloder Material Finish (with Screw Holes for Brackets) Dimensions W137 × H220×D190mm weight 3.0 kg
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Input transformer pair sale primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W50 × H70 × D57 mm 0.75 kg/piece (actual measurement, not including protrusions) The badge is discolored, and there are scratches in places (Kojima Yosuke)
Accessories: specifications
Line transformer using TANGO's input transformer, NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70 H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The price has been drastically reduced! 2024/4/18 sales price 178,000 yen 2024/1 maintenance completed! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.1.12 Maintained (exterior repair stain tinted front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
Maintained! A network with a crossover frequency of 7 kHz. It is ideal for MID/HIGH for 3-way systems using 2440. There is a small wound (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
The price has been drastically reduced! 2024/4/17 sales price 69,800 yen ※It is cheap because it has a tobacco smell. Hi-Fi Man's planar drive headphones have a high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box, connection cable
Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
The price has been drastically reduced! 2024/4/13 sales price 69,800 yen ※It is cheap because it has a tobacco smell. It is a premain amplifier with a built-in USB DAC compatible with a maximum DSD of 11.2 MHz and PCM384 kHz/32 bit input. Adopts a dual monaural configuration/fully balanced circuit design that inherits the design philosophy of the UD-503. This one is enough, and it's a convenient dish. There are small scratches on the exterior. Serial 1710182 (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cable
Main specifications: 20W+20W (8Ω) impedance 4Ω to 8Ω frequency characteristics 10Hz to 100kHz W290 x J81.2 x D264 mm mass 3.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570 Hz, 3.5 kHz impedance 8 ohms allowable input 200 W efficiency 90 dB size W185 ✕ H1,000 ✕ D300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg