The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The FOSTEX 20cm double woofer enclosure D-70 is a plywood cutting service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in a stereo magazine at the time by Musico-no-Tomosha, and this is not a genuine assembly kit. There is no difference in dimensions or materials. Wiring, SP terminals, detailed instructions, etc. are not included. If you understand it, if you are a self-made person, how about DIY this summer!? * The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications: Backload enclosure for 20cm double woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight about 93.6 kg
Comes with an acrylic cover. A cartridge keeper that can hold 6 cartridge shells. The clearance is large and easy to handle. There are scratches and dirt on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W200 x H107 x D100 mm weight 450 g (actual measurement)
4530BK made by Shinkosha. Since there are many chips and scratches throughout, it is inexpensive. The D130 was mounted. Woofer with MA15 fastener! Powerful bass reproduction far exceeding size is possible with the rear loading horn type enclosure (Sasaki Shota)
Accessories: MA15
Main specifications: screw pitch 420 mm hole diameter 360 mm plate thickness 40 mm front baffle plate thickness 22 mm W600 x H1250 x D600 mm 56.3 kg (all measured)
Unspecified 3-way enclosure It is a super bargain price with a considerable feeling of use. For experimentation or research, if you are a self-author with confidence in your arm, how about challenging it? (Yoichi Murakoshi)
Main Specifications: W648 x H967 × D457mm 36.8 Kg (Measurement) Woofer opening diameter 300 mm Scoker opening diameter 173mm tweeter opening diameter 102mm
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
Self-made enclosure. The woofer opening is about 340 mm in diameter, the horn opening above it is 450 mm x 266 mm, the upper opening is 260 mm x 134 mm, and the tweeter part is about 60 mm in diameter. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: plate thickness 25 mm W800 x H960 x D580 mm 54.1 kg (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2022/7/16 selling price 100,000 yen wooden 46cm double woofer type. Baffle opening diameter 425mm Screw pitch 490mm Baffle and enclosure plate thickness 24mm Duct opening diameter 108mm Both the front and back plates cannot be removed. There is a difference in discoloration on the left and right in appearance, and there are corner chips, digging scratches, and dirt stains. (Yutaka Takimoto)
Accessories: none
Main specifications: W1600 × H950 × D850 mm (actual measurement) The weight has not been measured, but it seems that it is 100 kg or more.
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/11 sales price 3,000 yen ※It is cheap because it is in poor condition! The self-made enclosure 2-way type 175DLH and D130 were mounted, but the hole position on the screw receiving side did not match and they were fixed by sealing. Processing is required for actual installation. The exterior has a feeling of use over time, such as dullness, scratches, peeling veneer, etc. (ASAINE Tomonori)
Accessories: saran net
Main specifications: size 450 x 845 x 450 mm weight 17.7 kg (actual measurement)
One-piece rectifier tube, fishing rod type filament made in China, incorporates the structure of the original WE274 and is well-built. Measurement value 56 (rejected value 40) with replacement box ※ The measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Unspecified EP adapter. Includes an overhang gauge and is equipped with a level gauge. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: Weight 62 g (actual measurement)
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The price has been reduced. 2020/5/26 Sales price 29,800 yen Probably a 1 inch horn made by Raft Craft. When checked on the painted part, it is made of FRP-like material, and it is lightweight for its size, and can be carried by one man alone. The screw hole has holes for both ALTEC and JBL. There are many usability, dullness, scratches, paint peeling, etc. (Yoichi Murakoshi)
Accessories: None
Main specifications: Measured outer diameter dimensions approx. W835 × H250 × D835 mm Actual measured weight approx. 20.4 kg
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
This is a set of 4 round insulators with unknown details. There is a dent in the center of each. It is sturdy with a sense of weight. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size 39φ×H17mm weight 140g
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
Prices have been reduced. 2022/11/25 sales price 100,000 yen The enclosure for TA-4151A has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it heavyweight and very sturdy. The baffle opening is φ296 mm, the unit fasteners are made of wood, and the locking screws for the baffle plate are missing. The exterior has peeling veneer and stains. (TAKIMOTO Yutaka)
Accessories: None*Baffle plate locking screw missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 40,000 yen*Currently sold. Comes with a remote control. Subwoofer system with built-in power amplifier using Yamaha's unique YST system. The deep bass is thick and has a sense of volume, and is excellent for reproducing movies and live sound sources. It is a heavy structure using the same wood as GT racks. There is a feeling of use on the exterior due to scratches, dullness, paint peeling, etc. Serial 101034 (Tomonori Asaine)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: remote control instruction manual
Main specifications: floor-type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. The exterior and finger tips are straight, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g
※Since it is cheap and the video system has not been checked, it is currently sold. Yamaha AV receiver. It is based on Yamaha's sound field creation technology Cinema DSP. It is equipped with a cinema DSP (3D mode) that realistically reproduces a three-dimensional surround space. There are line scratches on the rear panel and dullness on the front (Daiki Goto)
Maintenance information: 2024.2.25 Operation confirmed (2ch playback only)
Accessories: remote control, instruction manual, power cable, original box, antenna
Main specifications: W435 x H171 x D367.5 mm Weight 11.2 kg
※Since it is a commercial device, it will be handed over as is. It's a very powerful sound unique to professional machines, and it pushes the sound forward and forward. Recommended for jazz and rock fans with large woofers. The exterior has scratches, bumps, etc. Serial JP01026 (Tamura Eiji)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: 240W+240W (8Ω) 480W (16Ω MONO) with peak output meter W480 × D413 × H183 mm 20.5 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep check OK
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
*Currently sold. Yamaha superwoofer equipped with a 20 cm x 2 double woofer. Equipped with active servo technology and a 150W high-power amplifier, it plays bass that is small yet full of volume. There is dirt, dirt and dullness on the exterior, and some floating on the bottom. Serial Z117079QS (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: No accessories
Main specifications: used unit 20 cm cone type x 2 rated output 150 W (5 ohms) playback frequency band 20 Hz to 160 Hz high cut filter 40 Hz to 140 Hz, continuously variable W235 x H602 x D463 mm 20 kg
The price has been reduced! 2024/4/18 sales price 6,000 yen*Currently sold. A long-selling model of phono equalizer for MM type cartridges. You can feel the thickness of the sound for the price, probably because of the good old design. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: none
Main specifications: rated input 2.5 mV (1 kHz) rated output 150 mV (1 kHz) power consumption 0.6 W W73 × H62 × D162 mm weight 640 g