A full-range speaker that uses a Satsuma Shimadzu 6cm DSS diaphragm. It is intended for low volume playback, so you can enjoy realistic sound that transcends size. The beautiful solid cherry wood enclosure is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: instruction manual, unit protector, cable hook, screws, + screwdriver, cross
Main specifications: 6cm full range 80dB 4Ω input resistance 15W main unit W150 x H260 x D210 mm, stand height 650 mm
Power cable, 1.5 m (1.5 m between plug tips), reproduces vocals more vividly by unplating the eyeglass type plug part. Improved image quality can also be expected when connected to a video device (Kojima Yosuke)
Accessories: none
※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. The exterior has scratches and paint bald spots. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters), electrolytic capacitor replaced, cleaned due to ATT stiffness, solder corrected, rubber foot added due to missing rubber feet, bias offset check, output sound check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a popping sound is made when the power is on and off, which is a specification.)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
1.6m pair of unprocessed 0.12mm x 238 (OFC) speaker cables This cable has a sense of volume in the mid to low range and is compatible with a wide range of devices (Tomoho Asaine)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Speaker cable 1.4+2.9 m pair end This is a well-balanced speaker cable, from powerful, unprocessed bass to delicate light sounds. There is a feeling of use such as dirt (Asae Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024.3.28 Sales price 278,000 yen First arrival! This speaker system is the highest-end model in the reference series announced on the 25th anniversary of KEF. The expansive spatial expression and fresh, glossy sound are attractive. It seems that the previous owner replaced the woofer edge with chamois leather, so durability is also safe. *The equalizer KUBE is included, but operation has not been confirmed due to 220V specifications. Even without an equalizer, it can be used as a normal speaker without any problems. Jumper cables are replacements (Oikawa Tetsuji)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: dedicated equalizer KUBE 107/2
Main specifications: 3 way 4 speakers 4 ohms 90 dB W330 x H1170 x D475 mm 45.8 kg
Mark 3 model of the long-selling model “A2050 Series” with a 0.6 m pair of RCA cables. Ultrapure copper of 7N or higher was adopted for the first time in this class, and both transparency and range have been improved from the previous model, and this degree of perfection is excellent in this price range (Asaine Tomo)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2024/4/13 CM10S2 has arrived for the first time in about 7 years at a sales price of 398,000 yen! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
The disposal price has been reduced! Member prices are not applicable. 2023/4/15 Sales Price 148,000 yen Overhauled by the manufacturer! The maniacal 300B power amplifier is now in stock in kit type. This is a product that Sun Valley/Kit stores were fully satisfied at the time and took on a new challenge. You can enjoy the sound unique to Sun Valley, which is plump and has a good tone. The exterior is dull, but there are no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.4.15 Maintained by the manufacturer (after fixing production issues, measurement and aging (5H) were completely reworked, and the 300B1 was replaced due to poor output (insufficient output). Since this product is a circuit with a transformer arranged at the input part, the input impedance is designed to be lower than a normal vacuum tube amplifier. Therefore, we recommend using the input volume at the maximum position unless there are special circumstances)
Accessories: power cord, manufacturer measurement table
Main specifications: 300B single power amplifier vacuum tube configuration: first stage 6C6 x 2, output stage 300B with adjustable ham balance only wiring method: all manual wiring bonnet: none Rated output: 8W+8W/8Ω, THD 10% frequency characteristics: 25Hz to 40kHz (1W, -3dB) gain: 25dB power consumption: rated 90W output impedance: 4,8,16Ω (select any system during production) ) Size (including vacuum tube and protrusions) W330 x D280 x H210 mm, weight approx. 12.5 kg
The price has been reduced. 2024/4/18 sales price 1,180,000 yen 800 Series Diamond advanced model. It reproduces a realistic sound field space that is extremely clear and has a high degree of transparency. The installation area has been reduced to fit the 800 Diamond into a living space, and it is a high-end machine that has both tightness and a sense of volume, and boasts a well-balanced mid-low range even at low volume. There is a light dent in the tweeter grille. Serial 0004457/0004458 (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: spike, transport lock, saran net jumper cable
Main specifications: 3-way bass reflex diamond dome tweeter x 1, warven kevlar cone midrange x 2 lohasel cone woofer playback frequency band 27 Hz to 33,000 Hz sensitivity 90 dB impedance 8 ohms crossover frequency 350 Hz/4 kHz dimensions W368 x H1135 x D563 mm weight 72 kg/unit
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/12 sales price 69,800 yen Maintained! A slightly unusual Crown consumer power amplifier. It is thin and rack-mountable. A lot of straight sounds are alive and well. It is also suitable as a separate introductory machine. The exterior is dark and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (volume volume noise was confirmed, so custom-made volume left and right were replaced, (click sound will disappear due to replacement of custom-made product) Running test with other sounds)
Accessories: none
Main specifications: 50W+50W (8Ω) W480 x H40 x D320 mm 7.5 kg
We've reduced the price! 2024/2/5 sales price 59,800 yen Manufacturer maintained! The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. In addition to dullness and small scratches on the exterior, there is a feeling of use such as slight stickiness. Serial 10212501972 (Hiroki Aso)
Maintenance information: 2024.2.5 maintained (function SW source direct SW disassembly repair SP relay replacement and other parts inspection operation test)
Accessories: instruction manual power cable
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible dimensions W434 x H180 x D478 mm weight 22 kg
※It has a cigarette smell, so it's cheap. An acoustic reality digital mono power amplifier known to those in the know. It has incredible high power from the start, and it makes speakers that are difficult to sound loud. Please enjoy the detailed and delicate sound that can only be enjoyed with this one. There are threads and line marks on the exterior (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (power display LED reinstalled, input changeover switch replaced, abrasive removed. I checked the output sound. *This model has a balanced output configuration. The negative side of the speaker terminal is not ground (sound is also produced on the negative side), please do not share it or connect it to GND.)
Accessories: power cable
Main specifications: 600W+600W (8Ω) W215 x H70 x 370 mm weight 3.4 kg/unit
Speaker cable with 2.3 m pair ends, unprocessed, 2-split band with balance & time correct construction. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 53400 63923 (Tomonori Asaine)
Maintenance information: 2023.12.15 Maintained (diaphragm installation adjustment throat cleaning DCR 63923/8,3 ohm, no vibration damage
(DCR 53400/7.8Ω vibration has scratches and small dents)
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
※It has a cigarette smell, so it's cheap. Class D power amplifier compatible with DSD 11.2 MHz and PCM384 kHz/32 bit inputs. When reproducing a digital source, all processing from input to output can be performed in the digital domain. It is also equipped with a USB-DAC function and Bluetooth function, so you can enjoy music with high sound quality from a PC to a smartphone. As for the exterior, there are some square brackets. Serial AXD36190304432 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) speaker load 4-16Ω analog audio input terminal/unbalanced input × 1 digital audio input terminal/USB-B input × 1 coaxial digital input × 1 optical digital input × 2 W200 × H86 × D258 mm 2.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 28,000 yen*2 shelves are missing. This model has an open form and is perfect for heat dissipation. This is a weight rack whose spacing can be changed with L-shaped brackets and screws. There are many dents and line marks on the exterior, top surface, and shelf boards, and dullness and a feeling of use can also be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: shelf board size W525 x D470 mm total load capacity approx. 250 kg W626 x D582 x H1122 mm 64 kg
The price has been drastically reduced. 2024/4/10 sales price 10,000 yen. Coaxial cable 0.9 m 75 ohm collet chuck plug From the shield notation, it seems that the cable is also made by ZAOLLA. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
※The rotation is slightly fast, but it is a specification, and since it is cheap, it is currently sold. current product. A fully automatic wireless turntable that combines the traditional analog technology of Technica with convenience. It can be connected to Bluetooth, so you can enjoy recording with wireless headphones, etc. The cartridge is included, and the phone is built-in, so you can easily enjoy it even with system components. There are no particularly large conspicuous wounds (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: cartridge, instruction manual, power adapter, connection cable, EP adapter
Main specifications: belt drive 33/45 rotation W435.6 x H128 x D374 mm 5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/13 sales price 128,000 yen ※The PHONO board is for MC only (MM cannot be used). Maintained! It has an elegant and glossy tone, and although combinations with 405 are common, 606 etc. are also a good match. It has the natural texture of the acoustic sauce and the smooth tone that feels good against the skin. There are small scratches and paint peeling on the right side. Serial 24151 (Takasaki Atsushi)
Maintenance information: 2024.4.12 maintenance (main board ground point screw reprocessing, operation check) 2024.1.17 maintenance (replacement of coupling C, bypass C, etc. in each board, AC SW spark killer C replacement, INPUT switching analog SW through hole pattern re-soldering, power SW internal contact polishing ~ operation check)
2020.6.13 Maintained (balance VR, SW disassembly cleaning. Attach 1 kΩ resistors to both the left and right sides of the flat board. Replaced due to faulty IC. All flat and mother boards have been soldered again. (Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting the power amplifier to confirm normal operation.)
Accessories: power cord, copy of manual
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/13 sales price 2,980,000 yen Maintained with attention to details such as drivers and wiring! The Georgian 4 is attractive for its elaborate horn configuration and beautiful furniture-like design. It is a model with a built-in crispy horn, a structure that creates a unique sound with a rich sense of scale, and the loud sound is truly an American masterpiece, but you can also feel a somewhat English-like sex appeal. *The attenuator has been maintained, but slight chipping occurs when turning due to deterioration of the original winding resistance (Oikawa Tetsuji)
Maintenance information: 2023.9.13 Maintained (828HF disassembly and maintenance: separation from magnetic circuit and diaphragm, magnetic circuit diaphragm maintenance: cleaning of the magnetic circuit, rustproof vibration system, round out, stop noise, T350 disassembly and maintenance: separation from the magnetic circuit and diaphragm, sound pressure difference adjustment: stop noise due to resonance sound generation, elimination of sound pressure drop due to rear sound leakage. Confirm that there are no modifications inside the housing. Remove rust from screws on screw-type terminals, pickle, and polish and clean the receiving side. ATT (x4) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: none
Main specifications: 4-way 15WK, 828HF, T350, X336 (300/3500) approx. W860 x D660 x H1,350 mm approx. 90 kg
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.7 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/4/14 sale price 1,450,000 yen Mark Levinson dual mono preamp No. 526! This is an ESS 32-bit D/A converter compatible with 192 kHz/32 bits. Also, it is equipped with plenty of digital inputs such as 2 coaxial, 2 optical, AES/EBU, and USB, and reproduces compressed digital sources with high fidelity. It is impressive that it has a more glossy SN feel than No. 326S. The exterior has a scratch on the upper front corner, and a small scratch on the back of the remote control about the size of a pinky finger nail (Sasaki Shota)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, manual, power cable, screwdriver, original box
Main specifications: analog input terminals/XLR balance x 2 pairs, RCA unbalance x 3 pairs, phono input x 1 pair, digital input terminal/XLR balance x 1 pair, RCA coaxial x 2, optical (Toslink) x 1, USB-B (asynchronous) x 1 output terminal/XLR balance x 1 pair, RCA unbalance x 1 pair, headphones (6.3 mm phono) x 1 W438 x H102 x D457 mm 18.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
※Inexpensive because it smells like tobacco and is in poor condition. PSE certified product. A popular 6-prong power strip. The metal case has excellent rigidity and shielding, and Belden OFHC material is used for internal wiring. This best-selling model is popular for its thick sound image and ease of use. There is a strong feeling of use on the exterior, dirt, paint peeling, rust, etc. on the entire exterior (Murakoshi Yoichi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Main specifications: 3P type x 2, 2P type x 4 ports, cable length 2 m
It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses a delicate sound and a clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
The disposal price has been reduced. 2024.4.5 sales price 298,000 yen Maintained. An EX series midsize machine that uses a precise curved baffle shape that realizes perfect time alignment. A new cherry brown color using natural beechwood! It is a speaker with a high degree of perfection that balances the strength of the sense of energy, range, and breadth of sound field at a high level. There are no noticeable scratches. Jumper cables are general-purpose products (Sasaki Shota)
Maintenance information: 2024.4.5 Maintained (ceramic graphite diaphragm coil deformation correction and magnesium cone edge peeling deformation repair. (Tweeter coil deformation repair, mid-range peeling deformation repair)
Accessories: none
Main specifications: phase reversal type tall boy floor type, anti-magnetic design, 3-way woofer, 16cm cone type x 2, mid/tweeter, coaxial 14cm cone type, 3cm dome type impedance, 6Ω playback frequency band, 30Hz to 100kHz, output sound pressure level 88.5 dB, maximum input 160 W, crossover frequency 400 Hz/2 kHz, external dimensions W350 x H1224 x D541 mm, mass 48 kg/tube
1.8 m PSE standard power cable, 4 types of hybrid original conductor+3-core structure, this is a long-selling cable that reproduces a sense of expanding sound field, medium to high range with good coverage, and a wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: original box
The price has been drastically reduced. 2024/3/2 sales price 99,800 yen Maintained! professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.2 maintained (internal dismantling all check, Tr, C, R check, ±B INPUT bypass C replacement, Tr, R, etc., all OK, INPUT photocoupler check, operation check)
Accessories: copy of instruction manual, power cord, dedicated SP cord (cable length 2.5 m)
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
Maintained! It is a model designed by US Marantz and manufactured in Japan. It develops an American sound with a dry air feel and strong push. The design is also a vintage control amplifier with a taste unique to the 70s. Externally, there are scratches and threads on the cabinet. *Some RCA terminals and inlets have been changed. Serial 7237 (Tamura Eiji)
Maintenance Information: 2024.4.13 Maintained (Mode selector stopper mechanism fixed. Electrolytic capacitors and film capacitors have been replaced. The speaker terminal (red and black type) has been processed and replaced. The end of RCA TAPE was replaced due to discoloration. Each input/output operation was checked.)
Accessories: power cable
Main specifications: Line input 5 systems, phono (MM), 2 systems, pre-out, 1 system, W391 x H146 x D222 mm, 7.3 kg
The price has been reduced! 2024/4/7 sales price 2,000 yen ※1 speaker cable, 3.6 m, unprocessed terminal, OFHC conductor, conductor diameter 10 AWG, the highest grade in the STUDIO series. The conductor diameter is 10 AWG (approx. 2.6 mm), and combined with its characteristic internal structure, it is ideal for long-distance transmission. Discoloration and stickiness can be seen on the exterior (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
RCA cable, 0.5 m, pearitz coated OCC copper, has a relatively clean tone, and is a product made by Wireworld that is particular about sound quality while keeping costs down. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Stereo mini plug to stereo mini plug cable 1.5m audio technica GATE LINK series mini plug cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unchecked
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
The price has been reduced. 2024/2/23 sales price 99,800 yen with box! RME audio interface. A rich 18-in/18-out audio channel, a high-performance digitally controlled preamp, and an AD/DA converter all support operation at 192 kHz. Achieving the performance required in professional settings with a half-rack size body (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: instruction manual, power cable, connection cable, setup disc, original box
Main specifications: maximum 192 kHz compatible coaxial input/output x 1 system maximum 192 kHz (S/MUX4) compatible optical input/output x 1 system analog input/output can be used simultaneously 8 channel AD/DA converter, mixing console, external effects insert function, word clock (BNC) input/output x 1 system MIDI input/output, 2 MIDI input/output systems, W216 x H46 x D145, weight 1.1 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
The disposal price has been reduced! (Member prices are not applicable) 2024/3/2 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yonejima Satoshi)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: No accessories
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The disposal price has been reduced! (Member prices are not applicable) 2024/2/16 sales price 448,000 yen Maintained in 2022/7! Comes with a hood! This is a famous gem that has both thickness and sex appeal while making a quick sound. There is no boomy sound, which is a drawback of vacuum tube amplifiers, and it is a vintage sound that is still popular today due to its good tone and good balance. The exterior has stains, stains, paint peeling, etc. Serial 2417 (Tomoho Asaine)
Maintenance information: 2022.7.13 Maintained (replacement of 2 vacuum tubes 6CA7 deteriorated, 2 electrolytic capacitors → block capacitors replaced with 47 μF x 2, resistance 1W domestically produced → replaced with USA-made, bottom leg deterioration replacement/vacuum tube socket and RCA jack re-caulking repair. *Other operation checks have been performed (measured at 32 to 43 W SP: 8 Ω at rated output AC 100 to 117 V)
2021.3.28 Maintained (vacuum tube socket partially loosened, re-caulking repair, other RCA jack re-caulking repairs and AC BAL. /DC BAL. /BIAS realignment implemented. Rated output AC 100 to 117 V measured at 32 to 41 W SP: 8 Ω) Maintained on 2015.1.23 (2 VT6BH6 noisy replacements · block.c40/20/20 μf deterioration exchange and external coating · R1/2W 100Ω combustion exchange · Fuse3A Slowblow ⇒ 2.5A SlowBlow replacement with original · EL.C10μF ⇒ 20 μF original replacement 2 pieces ※ other parts check ( EL.c has been added to Block.c2 by another company. Other EL.C has been replaced by another company))
Accessories: none
Main specifications: vacuum tube EL34, 6CG7 x 2, 6BH6 x 2 output 35W+35W W346 x H192 x D250 mm 21.9 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning)
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/6/24 sales price 178,000 yen Maintenance has been carried out and deteriorated capacitors etc. have been replaced! A newly created power supply is included. Genuine RF MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive (Daiki Goto)
Maintenance information: 2023.6.24 maintained (new power supply manufactured because the power module is defective but cannot be repaired, all deteriorated capacitors replaced, pin jack deterioration replaced, gain changeover switch replaced due to poor contact, each gain readjusted, operation inspected, (there are no current problems with the module)
Accessories: copy of instruction manual
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg