Maintained. Battery operated MC head amplifier. The modular type allows you to enjoy analog playback like the company's ML series. It has the sharpness and dynamic sound unique to being battery-powered, and the combination with the old SPU is particularly exquisite. There are scratches and scratches on the exterior. Serial 1232 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (there is a liquid leak mark on the battery holder. (It was cleaned and repaired because it was not available.)
Accessories: No accessories
Main specifications: 8 mV (maximum), output terminal with battery checker, 250 mV (maximum), frequency band 20 to 50,000 Hz, W220xH45xD100mm, 0.7 kg
The deteriorated vacuum tubes etc. were replaced in 2023 and full maintenance has been completed! The vintage MC30 is still loved today, half a century later. The sharp high range and thick low to mid range sound are nothing short of wonderful. Since the left and right sides come out clearly without interference, you can feel a better sense of localization than a stereo machine. The good separation unique to mono amplifiers stands out, and it can play everything from jazz to classical music well (Murakoshi Yoichi)
Maintenance information: 2023.6.10 maintained (vacuum tube socket re-caulking repair, vacuum tube 12AX7 replacement, selenium countermeasure diode addition, 2W and 1/2W resistor replacement, HUM ADJ. readjustment/RCA jack re-caulking repair, operation check (measured at 25-38W SP:8Ω with rated output AC100-117 V).)
2012.6.12 Maintained (Capacitor Exchange/Mallory x 2, Sprag x 2, Europe x 2, Black Beauty x 10, Cornell x 2, Vacuum Tube, Partially Replaced with Good, Used, Silicon Rectifier, Vacuum Tube Pin, Rust Polishing and Socket Electrode Sack, Bolum, Sliding Surface Cleaning, RCA Pin Jack Cleaning, Each Voltage, Operation Inspection)
Accessories: none
Main specifications: rated output 30W, input sensitivity 0.5V vacuum tubes 6L6GC x 2, 5U4 x 1, 12AX7 x 2, 12BH7 x 1, 12AU7 x 1, W356 x H203 x D203 mm, weight 15.8 kg
The price has been drastically reduced. 2024/4/15 sales price 118,000 yen Maintenance is being carried out in 2020. 60Hz specification. A record player equipped with Ortofon's short arm RS-212 on the TD160. Only the turntable and arm mounts have a floating structure. It is an attractive player with a sharp sound and sound quality typical of Torrens. The springs on the dust cover hinge have deteriorated. There is damage such as scuffs and scratches on the cabinet dust cover. Serial 422455 (Murakoshi Yoichi)
Maintenance information: 2020.10.10 Maintenance completed (arms, arm bases, etc. are cleaned because rubber adhesives adhere to a wide area, etc., removed because the cushion spring is fixed with foreign matter, sub-board rubber adhesive cleaning, motor connection terminals (faston chips) are broken and unstable, arm elevation cannot be disassembled or adjusted, so current status (descent is slightly fast), arm operation, voice check)
Accessories: sub weight, AC adapter
Main specifications: one-step belt drive system, 16-pole synchronous motor, zinc alloy turntable (diameter 30 cm, weight 3.2 kg), W440 x H165 x D350 mm, 11.0 kg
The price has been reduced. 2024/4/16 Sales price 118,000 yen Manufacturer maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. Dullness, there is a small scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 manufacturer maintained (SP relay defect replacement, front VR main relay nuclear circuit Iida defect correction implementation, other operation inspections)
Accessories: manual, power cable, remote control
Main specifications: 100W+100W (8Ω) Playback frequency band: 5Hz to 100kHz Analog input: 7 systems Analog output: 2 systems Dimensions W458 x H166 x D464 mm Weight 23.0 kg
This is an MC-type cartridge from Entre. The sound is slightly stiff and sharp, and the sound quality is sharp. The outline and texture of the low frequencies are also firm. There are no particular bends. Serial 39354 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: MC type output 0.5 mV needle pressure 1.7 g to 2.3 g (appropriate 2.0 g) impedance 6.3 ohms dead weight 5.9 g
The disposal price has been reduced (member prices are not applicable). 2024/3/31 sales price 298,000 yen Maintained in 2014. It is a highly regarded CD transport with a high degree of perfection. The sound is neither too thick nor too thin, and has both sharpness and precision, a sound unique to Levinson during the heyday of CDs. While the sound quality is clear and fresh, it is compatible with a wide range of music genres with a rich, glossy tone. There are line scratches and threads on the exterior (Mizusaki Ryo)
Maintenance information: Maintained by Harman International on 2014.8.5 (CD clamper fixed, 11 deteriorated capacitors replaced, various parts adjusted, operation checked)
Accessories: remote control, instruction manual, power cord, transport lock
Main specifications: CD dedicated transport, 4 digital output systems, balance/BNC/RCA/ST link, W400 x H98 x D364 mm, 9.3 kg
Maintained. This is 3009 series 2. The sharp, well-sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (elastic coupling rubber x 1, bed plate grommets x 4 replaced, base clamp nut x 1 installed, main body disassembly check and cleaning)
Accessories: instruction manual (English), phono cable
Main specifications: short arm static balance type total length 265 mm overhang 15 mm needle pressure (when 1 rider weight is attached) 1 memory 0.25 g steps/0 g to maximum 2.5 g needle pressure (when 2 rider weights are attached) 1 memory 0.5 steps/0 g to maximum 5 g cartridge weight up to 28 g
The latest cable technology has been introduced, such as an XLR cable 0.6m pair conductor, a domestic high-purity PVC conductor (premium virgin oxygen-free copper) insulator, air-containing PE material (30% air content), and a 2-core twist structure. The AET sound is clear and sharp (Mizushima Itsuro)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024/3/7 sales price 128,000 yen Maintained! A crisp, bright, and sharp sound typical of Marantz from the 1970s. Exactly, it's an American sound on the west coast. The design is also a simple design typical of US Marantz. ※The leg is out of stock. The exterior has dullness and small scratches. Serial 4180 (Yonejima Satoshi)
Maintenance information: 2024.3.7 Maintained (single CH power stage transistor replacement. Screwdriver transistor resistor replacement. Drive Tr Capacitor Replacement Contact polishing, aging test)
Accessories: No accessories
Main specifications: 125W+125W (8Ω) W445 × H170 × D265 mm 14.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 79,800 yen Hi-Fi Hall first arrival! A compact and elegant DALI tall boy speaker with sharp low frequencies and clear midrange, and an airy treble range. The exterior has a scratch on the stand, a scratch on the side of the main unit, and a small scratch on the top plate. Serial 6255811 (Sato Wataru)
Maintenance information: 2024.4.2 sweep test good
Accessories: instruction manual, spike, saran net
Main Specifications: Frequency Characteristics: 39~26kHz 88dB Impedance 4Ω Tweeter 29mm Soft Dome Midrange/Woofer 130mm/SMC Wood Fiber Cone Driver ✕ 2 Dimensions W162 ✕ D283 ✕ H830mm Weight 10.8 kg
Technica MC Cartridges. The sound quality is bright and precise, and the sharpness of the high frequencies is excellent. It is sharper than the 33 derivative models that followed, and fits well with jazz fusion (Oikawa Tetsuji)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: none
Main specifications: output voltage 0.4 mV needle pressure 1.2 to 1.8 g (standard 1.5 g) internal impedance 17 ohms oval needle weight 6.8 g
The price has been reduced. 2024/3/24 sales price 59,800 yen digital cable 1.5m BNC specification In order to comply with next-generation standards, a large diameter variclad core with about twice the capacity of regular products is adopted, and large amounts of information can be transmitted at high speed. The sound is high speed and has excellent sharpness. There are abrasions around the tube (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/4/3 sales price 118,000 yen Maintenance completed! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. In addition to the exterior, wrinkles on the woofer center cap, and marks on the top plate, there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.3 maintenance completed (exterior repair/cleaning, woofer maintenance edge tear repair on one side)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
*Needle cover is missing. Using cross-shaped electromagnetic soft iron from Fidelity Research's MC type cartridge armature (where the cantilever is received), the cantilever uses a high-strength aluminum alloy. It makes me hear a sharp, crisp sound (Hiura Katsuji)
Maintenance information: 2024.4.12 sound output confirmed
Accessories: original box (alternative)
Main specifications: MC type output voltage 0.2 mV needle pressure 1.25 to 1.75 g playback frequency band 20 to 40,000 Hz dead weight 6.2 g
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. There are many scratches on the exterior, the top plate, and abrasions on the front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 manufacturer maintenance completed (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, lock plate
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The price has been reduced! 2024/4/12 sales price 1,000 yen ※Since there are no compatible cartridges, they have not been checked. Replacement needle compatible with Sharp record player RP-1033 If you are looking for one, please take this opportunity. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.12 sound output unchecked
Accessories: original box
Main specifications: Appropriate needle pressure 1.25g
The price has been reduced. 2024/4/11 sales price 278,000 yen ※Saran net is out of stock. Edge has been maintained, including a brand new replacement! It is an improved model of the best-selling S3100, and inherits the technical know-how of the K2 series. The compression driver is 275 Nd, and the high range horn is equipped with a defined directivity horn. The woofer uses the ME150HS. In addition to the loud, voluminous bass, the clear high frequency, which is sharper than the original, is attractive. There is color burn on the center cap, dents and small scratches on the top surface. (MURAKOSHI Yoichi)
Maintenance information: 2024.4.10 maintenance (exterior cleaning/simple repair
Woofer edge replacement, driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, replacement with a used product of the same type due to damage to one side+ terminal) unit detachment/9V battery replacement)
Accessories: instruction manual
Main specifications: 2 way 2 speaker usage unit/38cm woofer ME150HS, horn H2600-1, HF driver 275nd efficiency 95dB impedance 8 ohms dimensions W561 x H1102 x D406 mm weight 63.5 kg/bottle
※Since there are no compatible cartridges, they have not been checked. Replacement needle compatible with Sharp record player RP-L3 If you are looking for one, please take this opportunity. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.12 sound output unchecked
Accessories: original box
Main specifications: Appropriate needle pressure 1.25g
The disposal price has been reduced! (Member prices are not applicable) 2024/3/2 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yonejima Satoshi)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: No accessories
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
Woofer edge softening treatment was completed in March 2021! The sharp mid-high range, which is typical of a diamond tone, is characteristic. The low frequency thickness unique to 30 cm is also attractive, so you can enjoy it in all genres. There are some dents on the exterior. Serial 16747/16900 (Yonejima Satoshi)
Maintenance information: 2021.3.6 Maintained (softened)
Accessories: saran net
Main specifications: 3 way 3 speaker sealed impedance 6 Ω playback frequency band 35 Hz-35 kHz crossover 500 Hz/4 kHz maximum input 230 W sound pressure 91 dB W380 x H680 x D325 mm 27 kg
It took plenty of time and money to finish everything from overhauling each unit to reupholstering the saran net to full exterior maintenance. This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. Serial 16119, 16349 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (exterior repair/polishing/oil finish, front and rear baffle repair/painting, saran net reupholstery, frame repair, woofer maintenance: edge replacement, cone paper coating, midmaintenance: driver maintenance: magnetic circuit rust removal/in-gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter maintenance: magnetic circuit rust removal/in-gap cleaning, terminal Cleaning screw replacement, network maintenance: frequency characteristic check, ATT disassembly cleaning, switching SW contact cleaning, terminal cleaning/screw replacement, unit detachable diffuser repair)
Accessories: saran net, diffuser
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/book
Speaker cable with 1.4-0.9 m pair end untreated OFHCC continuous crystal copper is clear, bright, and has a slightly tough sound with sharpness throughout. Perfect for rock and jazz. There is a feeling of use on the exterior such as small scratches (Tamai Jun)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Comes with original box! An A-shell elliptical needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 924201 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
Audio-Technica's lightweight hard shell. It is compatible with cartridges that are sharp and sharp. The connection between the fuselage part and the arm is made of separate parts, making it difficult for extra signals to be transmitted. (TAMURA Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum dead weight 12 g (actual measurement)
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission (Oikawa Tetsuji)
Maintenance information: 2024.3.31 operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
Maintained in November 2023! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on (It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
This model is specialized for 3009S2 light needle pressure and has narrowed down applications. The sharpened, sharp followability is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. Serial 182902 (Fujisawa Yukishi)
Maintenance information: 2024.3.1 continuity confirmed
Accessories: phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
Compatible with SHARP OPTONICA STY-101 This is a replacement needle for CART-101. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-78D, TRIO N-64, SHARP STY-129, Marantz CTS-143, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Maintained! A model that specializes in 3009S2 light needle pressure and has narrowed down applications. The sharp, well-sharpened followability is attractive. You can enjoy the sharp cuts and the amount of information typical of an analog disc. The stoic and beautiful design, which looks like a precision machine, is also excellent (Fujisawa Yukishi)
Maintenance information: 2023.10.25 Maintained (bed plate grommets x 4 were replaced due to deterioration. The main unit was disassembled, checked, and cleaned. The inspection operation of each part was checked. (*Bed plate grommets are compatible as replacements)
Accessories: phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g, cartridge body weight 4 to 9 g
The 1.5m PSE standard power cable is sharp, but the increase in S/N speed is not deliberate and I like it. When I held it, it was heavy and had a sense of luxury. There was rubbing and dirt around the plug (Kojima Yosuke)
Accessories: none