Line transformer using TANGO's input transformer, NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70 H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
※Since it is a commercial device, it will be handed over as is. It's a very powerful sound unique to professional machines, and it pushes the sound forward and forward. Recommended for jazz and rock fans with large woofers. The exterior has scratches, bumps, etc. Serial JP01026 (Tamura Eiji)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: 240W+240W (8Ω) 480W (16Ω MONO) with peak output meter W480 × D413 × H183 mm 20.5 kg
The first stage is all 4 PASVANE WE310A! This is Sun Valley's Western 91 300B single amp. Anyway, it's an amplifier that clearly expresses even the afterglow, and it has enough power. Although it has an output of 8W+8W, this model is extremely practical and of high quality. It is a power amplifier with a balanced, glossy tone with no excesses or deficiencies from low to high frequencies. There is a scratch on the back of the exterior. Serial 63113 (Yonejima Satoshi)
Maintenance information: 2021.6.13 manufacturer maintained (all metal fittings on the 310A socket have been increased and tightened, looseness of vacuum tube pins and socket fittings fixed) 2020.8.7 manufacturer maintained (as preventive maintenance, hot bond treatment to prevent disconnection is performed on the 310 grid cap solder part, and residual noise, gain, frequency characteristics, and voltage of each part are measured to confirm that there are no abnormalities)
Accessories: power cable
Main specifications: output 8W+8W vacuum tube 300B ✕ 2 (Elehamo) 310A x 4 (PSVANE) 5R4GY ✕ 1 (RCA) W400 x H210 x D300 mm weight 23 kg
It is a vacuum tube amplifier equipped with a 300B vacuum tube. Recommended for those who want to enjoy a vacuum tube amplifier casually. Enjoy clear, thick low frequencies. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: power cable
Main specifications: 7.6W+7.6W 30-42khz W375 x H200 x D290 mm weight 18 kg
The optical digital cable uses a 0.7 m high-reliability metal ferrule plug and APF (all plastic fiber). How about an introduction to optical connections? The exterior is dull and has a feeling of use. (MURAKOSHI Yoichi)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
1.8 m PSE certified power cable This is a long-selling model of the company's power cable. It has a natural and thick sound that is excellent to listen to. It also has the effect of making hard CD players mild. As for the exterior, there is a thread on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
An Audio-Technica interconnect cable that uses a 1.5m pair of RCA cables and PCCC2 heavy coaxial cables. You can feel the dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources. There is a feeling of use on the exterior, such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
RCA cable 1.0 m pair with 24K gold-plated turbine plug and split center pin specification, 2-core structure, sheath resistant to aging, and Duraflex jacket. The exterior has a feeling of use and dullness (Tomoho Asae)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
*Currently sold. Comes with a remote control. Subwoofer system with built-in power amplifier using Yamaha's unique YST system. The deep bass is thick and has a sense of volume, and is extremely effective in reproducing movies and live sound sources. It is a heavy structure using the same wood as GT racks. There is a feeling of use on the exterior due to scratches, dullness, paint peeling, etc. Serial 101034 (Tomonori Asaine)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: remote control instruction manual
Main specifications: floor-type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
Speaker cable with 2.3 m pair ends, unprocessed, 2-split band with balance & time correct construction. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
RCA cable 1.5m pair rhodium plated plug accuphase genuine OFC series cable looks like a high-purity OFC Ritz cable with excellent corrosion resistance, and it sounds supple at the same time as extrusion in the mid to low range. The exterior has a feeling of use such as rubbing, dirt, and bending habits on the sheath (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
RCA cable 1.3 m pair Audio-Technica RCA cable Uses 24K gold-plated plugs and PCOCC conductors. The cable is soft, easy to handle, and easy to use. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Classic GRACE shell. The strong and lightweight construction with aluminum press processing is attractive. It is a product that brings out the characteristics of cartridges (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: aluminum press processing dead weight approx. 11g
Please upgrade to an RCA cable, 1.0 m pair, or Monster Cable standard cable from the original one. There is dullness etc. on the exterior (Tomonori Asae)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
*Currently sold. YAMAHA monitor speaker series. Since it is the same 3-way as 1000m, the resolution is also high, and the sound quality allows you to feel the spaciousness. Although the price and size are reasonable, you can fully experience the sound of a Yamaha monitor, and it is an ideal model as an introductory machine. The exterior is scratched and dull, and there is a feeling of use such as dents on the grill.*There is a slight crack on the ATT. Serial 111543L 111543R (Asaine Tomoho)
Maintenance information: 2024.4.18 Sound output operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers sealed 90dB 6Ω W276 x H496 x D251 mm 12.0 kg
*Currently sold. A long-selling model of phono equalizer for MM type cartridges. You can feel the thickness of the sound for the price, probably because of the good old design. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: none
Main specifications: rated input 2.5 mV (1 kHz) rated output 150 mV (1 kHz) power consumption 0.6 W W73 × H62 × D162 mm weight 640 g
※It has a cigarette smell, so it's cheap. A rare Audiocraft RCA to XLR conversion converter has arrived. A useful item for converting an RCA pin cable into a balanced cable. The exterior has paint bald spots, dirt marks, etc. Serial 43217 (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: W200×H75×D300mm 2.7 kg
The price has been drastically reduced. 2024/2/12 sales price 89,800 yen ※It has been replaced with a non-genuine edge. You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are viscoid sagging marks (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
The price has been reduced. 2023/12/31 selling price 19,800 yen Infiniti's slightly rare center speaker. Unlike a domestically produced center speaker that mainly plays the vocal band, you can feel the nuance of a Scandinavian speaker that plays as if it were floating in space. There are small scratches on the exterior, and the saran net is partially torn (Oikawa Tetsuji)
Maintenance information: 2023.12.31 operation confirmed
Accessories: none
Main specifications: 3 way 4 speakers 6 ohms W509 x H230 x H270 mm 12.5 kg
The price has been reduced. 2024/4/8 sales price 99,800 yen B&W bookshelf speaker. Each one has good sound granularity and a clean tone, and is compatible with a wide range of genres and sources. It is an attractive, practical speaker with medium to high range quality comparable to advanced models. There is a slight feeling of use, such as light rubbing on the front baffle. Serial 0018723 0018724 (Mizushima Itsuro)
Maintenance information: 2024.4.8 operation confirmed
Accessories: instruction manual, saran net, jumper plate
Main specifications: 2-way bass reflex type bookshelf speaker playback frequency band 45 Hz to 50 kHz W200 x H340 x D280 mm 8.9 kg
※It has a cigarette smell, so it's cheap. Compared to the 1.0 m pair of RCA cables, EQI6, OCC high-purity copper conductors, up to Equinox 5, the company's standard cable, which has a high level of clarity and creates a high-end oriented sound, is recommended as a first step towards luxury cables. There is a feeling of use due to appearance, dullness, friction, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Sennheiser Recable 1.5m Recable cable that can be used with 2PIN type headphones such as HD650. It's a stereo mini plug and the standard conversion plug is out of stock (Murakoshi Yoichi)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
* There is no problem with the sound quality, but since there is a dent correction mark on the tweeter on one side, it is inexpensive and is currently sold. An authentic speaker that produces well-balanced sound quality from a compact cabinet. The mid-high range, which has a good sense of signal even at low volume, really makes you feel like a modern speaker. Stringed instruments and pianos in particular have a luster and are recommended
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box
Main specifications: 2-way 2 speakers, frequency characteristics, 50 Hz to 26.5 kHz, input sensitivity, 88 dB impedance, 6 ohms, W205 x H351 x D293 mm, 6.3 kg per unit
Maintained by Denon! This is DENON's mid-range model, and is a staple machine with an excellent sense of stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There are small scratches on the exterior. Serial 8061507480 (Tamura Eiji)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
※It has a cigarette smell, so it's cheap. XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). The exterior has dirt and paint bald spots (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
※Since it is cheap, it will be handed over as is. Ishino Lab's Master Series power amplifier designed by Mr. Hirano. A class amplifier equipped with a matching transformer. It has a compact design and seems to be easy to use. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: instruction manual, power cable
Main specifications: 1W+1W (8Ω) 4-8Ω 20-20khz W250 × H85 × D263mm weight 3.0 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570Hz,3.5kHz impedance 8Ω allowable input 200W efficiency 90dB size W185 x H1000xD300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
*Inexpensive because there are multiple scratches on the front panel. This model uses a non-feedback amplifier circuit with discrete components at all stages. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. The smooth, high-SN, and delicate expressive power typical of recent models is attractive (Oikawa Tetsuji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: power cable
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg
*Currently sold because it is cheap. We have a full range of accessories such as the original box. The subwoofer is a slim, compact, and high-resolution sound bar that can be placed under a sofa, and has enhanced installability. Bluetooth compatible and easy to enjoy (Oikawa Tetsuji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: original box, remote control, power cable, connection cable
Main specifications: bar speaker 30W+30W W497 x H64 x D104 mm 2.0 kg subwoofer W383 x H95 x D380 mm 6.6 kg
※It has a cigarette smell, so it's cheap. Class D power amplifier compatible with DSD 11.2 MHz and PCM384 kHz/32 bit inputs. When reproducing a digital source, all processing from input to output can be performed in the digital domain. It is also equipped with a USB-DAC function and Bluetooth function, so you can enjoy music with high sound quality from a PC to a smartphone. As for the exterior, there are some square brackets. Serial AXD36190304432 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) speaker load 4-16Ω analog audio input terminal/unbalanced input × 1 digital audio input terminal/USB-B input × 1 coaxial digital input × 1 optical digital input × 2 W200 × H86 × D258 mm 2.7 kg
※It has a cigarette smell, so it's cheap. Yamaha commercial power amplifier. This is an easy rim-sized Yamaha commercial amplifier. The overall output is flat with elegant sound quality. There are dirt and scratches on the exterior. Serial 11505 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) left and right independent variable volume S/N ratio 110dB W480 x H94 x D338 mm
This is an MC-type cartridge from Entre. The sound is slightly stiff and sharp, and the sound quality is sharp. The outline and texture of the low frequencies are also firm. There are no particular bends. Serial 39354 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: MC type output 0.5 mV needle pressure 1.7 g to 2.3 g (appropriate 2.0 g) impedance 6.3 ohms dead weight 5.9 g
Technica Hi-CP Cartridges The inside of Technica's MC needle makes a clear, firm sound. There are no particular bends. Serial 304 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: needle cover
Main specifications: MC type, output voltage 0.4 mV, oval needle pressure 1.5 g (1.2 to 1.8), impedance 17 ohms, dual moving coil system, dead weight 6.8 g
This model commemorates the 250th anniversary of J.S. Bach's death. Uses a 6N silver wire coil. It is a cartridge that excels in even more delicate spatial expression while retaining the feel of an orthophone. The know-how of the masterpiece Jupiter has been fully introduced, and the high cost performance stands out. The cantilever is moving slightly to the right (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: original box, needle cover
Main specifications: output voltage 0.45 mV frequency characteristics 20 Hz to 35 kHz internal resistance value 5 ohms, suitable elliptical needle pressure 2.5 g, dead weight 10 g
Ishino Lab's control amplifier that uses a rectifier tube for the power supply unit. Although it is a small and long body, it is a car with excellent cost performance, such as separating the power supply part and installing an MC transformer compatible with a wide range of cartridges. The output is also equipped with RCA balance. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: instruction manual, power cable, connection cable
Main specifications: 2 phono systems, LINE1 system amplifier part: W250 x H75 x D230 mm weight 2.2 g power supply unit: W150 x H75 x D230 mm weight 2.8 kg
Maintained! An attractive power amplifier with rich bass, clear treble, and deep sound. Equipped with Technics's unique New Class A circuit, it enables efficient Class A operation, and you can enjoy powerful sound with plenty of driving power. There are scratches on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.17 maintenance completed (speaker relay replacement, inspection of each board, partial solder repair, DC balance, idling adjustment, sound output confirmation test)
Accessories: none
Main specifications: effective output 150W+150W (8Ω) output bandwidth 5Hz to 100000 Hz SNR 123dB damping factor 100 (8Ω) output meter indication range -60dB to +5dB power consumption 300W dimensions W430 × H178 × D416 mm weight 18.4 kg
The price has been reduced. 2024/4/13 sales price 8,000 yen. Magnesium alloy body headshell Since it has excellent vibration absorption, it maximizes the potential of the cartridge. In addition to the exterior and lead being changed to a single wire, there are slight mounting marks, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Main specifications: Twin lock pins made of magnesium alloy, weight 12 g
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
The price has been drastically reduced. 2024/4/10 sales price 10,000 yen. Coaxial cable 0.9 m 75 ohm collet chuck plug From the shield notation, it seems that the cable is also made by ZAOLLA. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/1 sales price 25,000 yen*Currently sold. There is only one sister aircraft to the famous SS-G7, so you can feel the breadth and depth of the sound. Although it is small, each sound is clearly expressed, and it goes very well with classical music. Overall, there is a feeling of use over time, such as dullness, scratches, and deformation. A tape is attached to the bottom corner. Serial 220604 220434 (Hiroki Aso)
Maintenance information: 2024.4.1 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, 8 ohms, 38 Hz to 20 kHz, 92 dB, W380 x H645 x D340 mm, weight 20 kg
A wide FM/AM tuner that uses a dedicated large, high-rigidity chassis and piano-black-finished sidewoods. The aluminum tuning dial, which allows you to enjoy an analog-like sense of operation, makes you feel nostalgic, and FM complementary broadcasts are also perfectly compatible. The reception sensitivity is also good, and it lets you hear thick sound. There are no noticeable scratches on the exterior. Serial Z015995VXR (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: power cord, loop antenna
Main specifications: FM/AM tuner reception frequency: 76.0 to 94.9 MHz (compatible with FM complementary broadcasting) external dimensions W435 x H94 x D450 mm mass 5.8 kg
*Currently sold. Remote control is missing. A slim, space-saving FM/AM synthesizer tuner. Equipped with a 40-station memory function, it is a standard machine that is easy to use. The exterior is dull and has a feeling of use (Daiki Goto)
Maintenance information: 2024.4.3 operation confirmed
Accessories: power cable, instruction manual
Main specifications: FM/AM tuner W434 x H75 x D242 mm 2.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/8 sales price 198,000 yen This is a 2-inch compression driver that is also installed in the company's studio monitor CD-3820. Since the mounting position is common with the JBL 2-inch driver, it is a driver that can be enjoyed not only between GAUSS units, but also with JBL units. There is something like a white stain on the diaphragm (Oikawa Tetsuji)
Maintenance information: 2024.4.8 operation confirmed
Accessories: none
Main specifications: 2 inch compression driver playback frequency band 600 Hz to 13 kHz impedance 8 ohms diameter 178 x D 145 mm 13.1 kg
※The rotation is slightly fast, but it is a specification, and since it is cheap, it is currently sold. current product. A fully automatic wireless turntable that combines the traditional analog technology of Technica with convenience. It can be connected to Bluetooth, so you can enjoy recording with wireless headphones, etc. The cartridge is included, and the phone is built-in, so you can easily enjoy it even with system components. There are no particularly large conspicuous wounds (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: cartridge, instruction manual, power adapter, connection cable, EP adapter
Main specifications: belt drive 33/45 rotation W435.6 x H128 x D374 mm 5 kg
The price has been drastically reduced! 2024/2/23 sales price 39,800 yen This is an 8 ohm specification Japanese 1 inch driver developed for professional use. A must-see for anyone who owns the company's AH-501 horn. It makes a penetrating treble and deep mid-range sound unique to CORAL. It is also recommended for those who make their own speakers. There is paint peeling on the exterior. Serial 1304, 1325 (Fujisawa Yukishi)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: No accessories
Main specifications: throat diameter 25.4 mm (1 inch) sound pressure 104 dB impedance 8 ohms playback frequency 500 Hz-18 kHz magnetic flux density 18000 gauss maximum input 100 W diameter 120 x H74 mm 3.3 kg/piece
※It has a cigarette smell, so it's cheap. This is Series 2 with dual outputs. It is a famous machine that achieves both a mild and highly textured mid to high range while having an unquestionably high amount of information. The high level of musicality that never becomes stiff due to its moderate temperature is also attractive. The exterior has scratches, stroke marks, and dullness. Serial R1256, S1256 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cord, connection cord, brand new solbutton
Main specifications: full balance circuit input: XLR x 5/bypass XLR x 1 preamp part: W445 x H80 x D152.5 mm 11 kg power supply part: W445 x H38 x D122 mm 3 kg