Add search
457 results
Manufacture | Model/Title | Price | Arrival date

301+3009S2UK

Ask 24-42552-08050-00
301+3009S2
Manufacture:GARRARD
Price: JPY 634,545
UK
Arrival: 2024-04-19 19:53:20
description
Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley has a 60 Hz specification, but the strobe platter is for 50 Hz (Murakoshi Yoichi) Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test) Accessories: insulator (audio technica AT616) Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg

400-CU.S.A

Ask 24-42331-06239-00
400-C
Manufacture:Fisher
Price: JPY 161,818
U.S.A 1959 made
Arrival: 2024-04-19 19:52:59
description
Maintained. A rare Fisher tube control amplifier. The 2 phono inputs are attractive. The high range is decent, but the round, rich, and powerful mid-range is unique to FISHER. The sound is light, bright and friendly. *Only CHANNEL A is valid for EQUALIZATION LP and 78 (Murakoshi Yoichi) Maintenance information: 2024.4.17 maintenance (re-strengthening treatment for all selector knobs (*Please do not remove them as much as possible.) Volume disassembly grease up treatment for BASS, main volume disassembly, cleaning and repair (due to the structure, there are some gang errors and sound leaks when narrowed down to a minimum. (If you are concerned, only RIAA 1 and AUX1 can be adjusted with LEVEL SET on the top surface.) Electrolytic capacitor 1000 μF replacement, vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2021.5.15 maintained (repair of poor contact with each part selector, etc., correction of lever deformation points, replacement of block capacitors 30/30/10/10 μF defects, vacuum tube sockets and RCA jack caulk repairs ※ Since the main volume is a special type with a loudness terminal, some gang errors will occur after 12:00. AUX1 and PHONO can be fine-tuned with the LEVEL SET on the top. *Other operation checks have been made (4 vacuum tube shield cases are missing) Accessories: Service Manual (English) Main specifications: Vacuum tube 12AX7, 12AT7, 6V4 using PHONO2 system Dimensions W390 x H120 x D210 mm 6.6 kg

PMA-2000/4Japan

Ask 24-42459-07153-00
PMA-2000/4
Manufacture:DENON
Original price: JPY 120,000
Price: JPY 63,455
Japan 2002 made
Arrival: 2024-04-19 19:51:10
description
Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. The exterior has dents in the upper right corner of the front, light line scratches in the lower left corner, and dullness throughout (Kanai Hidetsugu) Maintenance information: 2024.4/18 manufacturer maintenance (disassembling the switch, polishing the contact, grease coating, idling adjustment, operation test) Accessories: instruction manual, power cord Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg 

Strobo Scope Test RecordGermany

Ask 24-42552-08067-00
Strobo Scope Test Record
Manufacture:CLEARAUDIO
Original price: JPY 12,500
Price: JPY 5,455
Germany
Arrival: 2024-04-19 19:48:59
description
The strobe light is missing. Clear audio stroboscope There is a groove, and rotation can be checked while the cartridge is placed on it. Rotations up to 78 rotations can be confirmed at both 50 Hz and 60 Hz (Murakoshi Yoichi) Accessories: none

ストロボJapan

Ask 24-42552-08065-00
ストロボ
Manufacture:OYAIDE
Price: JPY 727
Japan
Arrival: 2024-04-19 19:48:55
description
Stroboscope included with Oyaide's BR-12 turntable seat. Measurement of up to 78 revolutions is possible. It comes with an overhang gauge. The large size and ease of adjustment are attractive (Murakoshi Yoichi) Accessories: none

SL-1200MK3Japan

Ask 24-42557-08104-00
SL-1200MK3
Manufacture:TECHNICS
Original price: JPY 69,800
Price: JPY 40,727
Japan
Arrival: 2024-04-19 19:48:50
description
※ Sub weight is missing. A long-selling player that Technics is proud of. It boasts a simple design that is easy to use, stable operation, and durability. Clear contours, high earthquake resistance, highly accurate tone arms, etc., all of these are attractive cars with a degree of perfection that exceeds the price. Exterior, slight small scratches, abrasions, etc. can be seen (Murakoshi Yoichi) Maintenance information: 2024.4.17 sound output confirmed Accessories: dust cover Main specifications: Quartz control direct drive system speed 33.45 rotation speed fine adjustment range ± 8% (continuously variable) W453 x H162 x D360 mm approx. 12.5 kg

島津Model-1+島津Model-2Japan

Ask 24-42552-08054-00
島津Model-1+島津Model-2
Manufacture:薩摩島津
Original price: JPY 825,000
Price: JPY 361,818(pair)
Japan
Arrival: 2024-04-19 19:48:38
description
A full-range speaker that uses a Satsuma Shimadzu 6cm DSS diaphragm. It is intended for low volume playback, so you can enjoy realistic sound that transcends size. The beautiful solid cherry wood enclosure is also attractive (Murakoshi Yoichi) Maintenance information: 2024.4.18 sound output confirmed Accessories: instruction manual, unit protector, cable hook, screws, + screwdriver, cross Main specifications: 6cm full range 80dB 4Ω input resistance 15W main unit W150 x H260 x D210 mm, stand height 650 mm

XTENSION12RSAustria

Ask 24-42552-08051-00
XTENSION12RS
Manufacture:Pro-Ject
Original price: JPY 700,000
Price: JPY 434,545
Austria
Arrival: 2024-04-19 19:47:44
description
The current model of the project's belt drive player. The company's commitment is packed with everything from the 9.5 kg aluminum alloy platter and selected ultra-low noise synchronous motors to neodymium magnetic floating feet. Equipped with Ortphone's popular dynamic balance arm RS-309D! (MURAKOSHI Yoichi) Maintenance information: 2024.4.17 sound output confirmed Accessories: instruction manual, stabilizer, power cord, head shell, mounting screws, template, needle pressure gauge, dust cover, EP adapter, gloves Main specifications: belt drive, compatible with 33, 45, 78 rotations, RS-309D: long arm needle pressure 0 to 5 g, cartridge weight 18 to 40 g (including shell), effective length 326 mm, effective length 311 mm, overhang 15 mm, height adjustment range 42 to 55 mm, W550 x H250 x 450 mm, 22 kg

C22U.S.A

Ask 24-42323-06158-00
C22
Manufacture:McIntosh
Price: JPY 570,909
U.S.A 1962 made
Arrival: 2024-04-19 19:45:07
description
Refreshed and maintained with attention to detail, such as replacing deteriorated parts! It's a beautiful item with a wooden case! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The wood case is made with a pan lock for replicas. Serial 53A03 (Murakoshi Yoichi) Maintenance information: 2024.4.17 maintenance (front lamp wiring re-soldering procedure, AC cord, 1W and 1/2W replacement, TREBLE switching noise reduction measures → 1/4 W resistance added, RCA jack and vacuum tube socket re-caulking repair. Operation check with AC 100 to 117 V) 2016.2.5 maintenance completed (main volume disassembly and cleaning repair, EL.c40μf, EL.c100μf replacement, 2 additional diodes, RCA jack and VT socket caulking repair, parts check including Block.C OIL.C) Accessories: none Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg

SX-LT55Japan

Ask 24-42306-05994-00
SX-LT55
Manufacture:Victor
Original price: JPY 176,000
Price: JPY 16,364(pair)
Japan 2002 made
Arrival: 2024-03-23 19:37:11
description
The price has been reduced. 2024/3/23 sales price 20,000 yen*Currently sold. Both center caps have dents, and the dowel rubber on one side of the saran net is missing, etc., so the condition is poor, so it is inexpensive. Victor's 3-weight dollboy speaker It is a masterpiece that combines a glossy sound that spans the entire area with a clear mid-range. It is characterized by a clear sense of transparency in mid and high tones, and shows its true value with female vocals, etc. In addition to the appearance described above, there is dullness and a feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.3.23 Operation confirmed Accessories: instruction manual, saran net, jumper Main specifications: 3-way 4-speaker system bass reflex type (anti-magnetic JEITA) 32 Hz to 80,000 Hz W300 x H1029 x D345 mm (including foot part) 22 kg
457 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out