Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Balance cable 1.0 m pair XLR cable using a huge network that is synonymous with MIT. The fact that the transparency is clearly increased is a word. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
A stand for small speakers with a simple design. With a height of 57 cm, this stand is easy to use. Scratches, dullness, and a feeling of use can be seen on the exterior and top plate (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 50 kg, external dimensions W280 x H570 x D295 mm, top plate size W190 x D230 mm, weight approx. 4 kg
Set of 4 An ideal acoustic damping material (sorbosane) is used. It helps improve the sound quality of players, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: load capacity 80 kg; size: diameter: 50/5 mm thick
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
The price has been reduced! 2024/6/6 sales price 19,800 yen This graphic equalizer has excellent basic performance and a 2ch/31-band configuration that enables high-quality equalization with a 45mm fader. The inputs and outputs are electronically balanced, compatible with XLR, standard phone jacks (3P), and screw terminals, and a built-in power transformer. It helps with detailed sound quality correction, which is now valuable. The exterior is dull and has a feeling of use. Serial 01015239 (Tomonori Asaine)
Maintenance information: 2024.6.6 operation confirmed
Accessories: power cable original box
Main specifications: 31 bands 10Hz to 50kHz (+0.5/-3dB) 18W XLR x 2, TRS phone x 2, screw-locked input terminal W483 x H123 x D201 mm 5.1 kg
Genuine Harman Mark Levinson's masterpiece amplifier. The large diameter unit is moved lightly with an order of magnitude of driving force. The tight, deep low-range texture is wonderful, and it clearly depicts slight differences in pitch and differences in the timbre and nuance of the instrument. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.6.10 Operation confirmed
2023.4.13 Maintained (replacement of deteriorated parts such as capacitors, resistors, etc., part of the board was corroded due to condenser fluid leakage, and was cleaned and repaired.
Other inspections and adjustments have been made)
Accessories: power cord (non-genuine), copy of instruction manual, remo pin, short pin
Main specifications: Dual monaural configuration, stereo amplifier, rated output 200W+200W (8Ω), frequency characteristics, 4 to 140000 Hz, SNR, 104 dB, input impedance, 50 kΩ, dimensions W483 x H210 x D450 mm, weight 40 kg
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
The price has been reduced! 2024/6/9 sales price 248,000 yen*It is cheap because it has a tobacco smell. The current premain amplifier was born as a model commemorating Denon's 110th anniversary. It is a model that uses high quality parts from the SX1 LIMTED and specializes in sound quality and functionality. It is also equipped with a digital input, and the USB-DAC is DSD compatible. It's delicate, has a sense of dynamism, and plays a higher level of sound. There are no noticeable scratches on the exterior. Serial J092000089 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: 80W+80W (8Ω) speakers: load 4 to 16 ohms frequency characteristics 5 Hz to 100 kHz input: line input x 3, PHONO (MM/MC) x 1, EXT. PRE x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 3 W434 x H182 x D450 mm weight 25 kg