This is the first DAC model, a masterpiece by CHORD that took the world by storm with its innovative sound. Even if you just check it with the small speakers, you can clearly feel the sound quality. Please enjoy the superb luster of the sound and amount of information. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: Digital input: coaxial (BNC), optical, AES/EBU x 1 system, analog output terminals: unbalanced, balanced x 1 system each, W335 x H65 x D145 mm, actual measurement 4.3 kg
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: case, needle cover, instruction manual
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
The price has been reduced! 2024/2/23 sales price 29,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. There are threads and dullness throughout the exterior. Serial 9970 (Hiroki Aso)
Maintenance Information: 2024.2.23 Maintained (head gap adjustment leaf SW cleaning speed adjustment)
Accessories: copy of instruction manual
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
Maintained by the manufacturer! A record player equipped with DP-3000 and DA-307 in a marble cabinet. The phono motor, which has a reputation for its highly accurate rotation and smooth sound quality, and the sturdy marble cab reproduce a heavy and rich analog sound just like the exterior. One with excellent cost performance. The dust cover has line damage, and the rubber mat has deteriorated (Oikawa Tetsuji)
Maintenance information: 2024.4.24 manufacturer maintained (TR replacement with black and rusty feet. speed adjustment, sound output test)
Accessories: none
Main specifications: [DA-307] static balance dynamic damping type total length 332 mm overhang 14 mm compatible cartridge dead weight range 5 to 10 g [DP-3000] servo type direct drive solid rotor type torque motor 33/45 rotation dimensions W530 x H183 x D440 mm total weight approx. 20 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 348,000 yen manufacturer maintenance completed! It is a transparent SACD player with a delicate sound. This model has a reputation for its high degree of perfection using a Sony drive. The thickness of the sound. The high level of musicality shines through the excellent balance of each SPEC, such as the high instantaneous power and large sound field space. There are light stains on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 Manufacturer maintained (resistor replacement/characteristic adjustment. Open and close belt open/close switch replacement. (Interior and exterior cleaning, operation/characteristic aging tests, insulation/safety tests completed)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: output balance 1 system, unbalance 1 system dimensions W475 x H151 x D397 mm, weight 17.7 kg
The price has been drastically reduced. 2024/4/24 sales price 248,000 yen with dedicated stand DK-205! A masterpiece of Diatone. The DS-205, which makes you feel the design of yesteryear, has arrived! The small aperture woofer is played in a large capacity enclosure, and the deep sound, which also has a soft, puffy texture, is attractive. It is a gem that is highly appreciated by music fans. Compared to the R305, etc., it is one size smaller and easier to handle. There are repair marks on the side molding, front of the stand, etc., and dents and abrasions are scattered (Kanai Hidetsugu)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: dedicated stand, saran net, jumper cable (replacement)
Main specifications: 2-way 2-speaker bass reflex output sound pressure level 88dB impedance 4Ω anti-magnetic design size W482 x H700 x D362 mm weight 26 kg stand H450 x H230 x D351 mm weight 9 kg
The price has been reduced. 2024/4/24 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
*Due to poor LOW volume, the specification has been changed so that only the low frequencies come out at full throttle. Other volumes can be used as normal. A pretty rare Yamaha channel divider. An electronic crossover network equipped with continuously variable crossover frequency, a 3-stage slope selector, and a Q control circuit. For 2 to 3 ways. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Maintained (switches and volume contact repairs, LOW volume has passed circuitwise because parts cannot be obtained)
Accessories: none
Main specifications: crossover frequency Low-Mid: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz Mid-High: 800 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz, 12.8 kHz Low-Mid: 35 Hz to 1.13 kHz continuously adjustable by crossover fine adjustment knob, Mid-High: 565 Hz to 18.1 kHz continuously variable W435 × H72 × D349 mm 7.5 kg
This is an MC-type cartridge from Entre. The sound is slightly stiff and sharp, and the sound quality is sharp. The outline and texture of the low frequencies are also firm. There are no particular bends. Serial 39354 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: MC type output 0.5 mV needle pressure 1.7 g to 2.3 g (appropriate 2.0 g) impedance 6.3 ohms dead weight 5.9 g