The price has been reduced. 2024/4/24 Sales price 248,000 yen Maintained in 2018. TVA-1 is a famous British vacuum tube power amplifier. Equipped with a sturdy, heavy transformer, this is reflected in sound quality. The sound quality is thick and has good extrusion, and the driving power is off par. You can enjoy the attractive vacuum tube sound with the tenacity of the mid-range and the bright mid-high range. There is dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: Maintained on 2018/3/31 (The capacitor was replaced, the looseness of the speaker terminals was increased and tightened, and the installation was corrected. The vacuum tube socket was replaced due to poor contact. The bias current for each output tube has been adjusted. The power supply and block capacitor connections have been corrected. There was poor contact with the input RCA pin terminal, so I replaced it.)
Accessories: none
Main specifications: 70W+70W W457 x H191 x D279 mm 38.1 kg
Maintained by the manufacturer! A record player equipped with DP-3000 and DA-307 in a marble cabinet. The phono motor, which has a reputation for its highly accurate rotation and smooth sound quality, and the sturdy marble cab reproduce a heavy and rich analog sound just like the exterior. One with excellent cost performance. The dust cover has line damage, and the rubber mat has deteriorated (Oikawa Tetsuji)
Maintenance information: 2024.4.24 manufacturer maintained (TR replacement with black and rusty feet. speed adjustment, sound output test)
Accessories: none
Main specifications: [DA-307] static balance dynamic damping type total length 332 mm overhang 14 mm compatible cartridge dead weight range 5 to 10 g [DP-3000] servo type direct drive solid rotor type torque motor 33/45 rotation dimensions W530 x H183 x D440 mm total weight approx. 20 kg
*Due to poor LOW volume, the specification has been changed so that only the low frequencies come out at full throttle. Other volumes can be used as normal. A pretty rare Yamaha channel divider. An electronic crossover network equipped with continuously variable crossover frequency, a 3-stage slope selector, and a Q control circuit. For 2 to 3 ways. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Maintained (switches and volume contact repairs, LOW volume has passed circuitwise because parts cannot be obtained)
Accessories: none
Main specifications: crossover frequency Low-Mid: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz Mid-High: 800 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz, 12.8 kHz Low-Mid: 35 Hz to 1.13 kHz continuously adjustable by crossover fine adjustment knob, Mid-High: 565 Hz to 18.1 kHz continuously variable W435 × H72 × D349 mm 7.5 kg
A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
Maintained! The successor to the PM-80. MOS-FET is used to create a unique world view with gloss in the mid-range. The plump, thick sound during Class A operation is unrivaled, and you can relax and immerse yourself in the music. On the exterior, there is a feeling of use such as seal marks, dullness, and small scratches on the top plate. Serial MZ009432260139 (Yasuhito Koshihama)
Maintenance information: 2024.2.17 Maintained (all main amplifier board soldering deterioration fixed. Bad output relay contact replacement. Disassemble and sharpen the input switch and apply contact cleaner. (Long time sound check)
Accessories: none
Main specifications: MOS-FET use, AB class switchable, Class A (20W+20W), Class AB (100W+100W) PHONO input (MC/MM switching), W454 x H165 x D380 mm 17.5 kg
A headphone amplifier compatible with headphones with various impedances, from foreign-made headphones with high impedance to headphones made in Japan with low impedance. The high-frequency sound is very beautiful, and the sound is transparent, and you can feel a sense of realism. Equipped with a speaker terminal, it can be used as a simple pre-main amplifier. The exterior is dull. Serial HD53R062.5045005 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: power cable, instruction manual
Main specifications: 1 input RCA, 1 XLR system, 1 output speaker system, 2 headphone systems W217 x H51 x D391 mm 2.6 kg
Set of 4 spike bases A spike bass for audio created with an emphasis on strength and non-resonance. High-strength 2000 series alloy (non-magnesium) is used. Sound strength, sense of positioning, etc. can be improved. There is oxidation on the exterior (Tamura Eiji)
Accessories: none
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
Digital cable 1.5m DENON LINK cable This is a dedicated cable that maximizes the performance of the high-purity copper high definition digital audio interface DENON LINK. Stable high quality digital transmission without being affected by the surrounding environment has been achieved by thoroughly eliminating vibrations from the plug and shield (Tamura Eiji)
Accessories: original box, instruction manual
Quadra 180mm pole set of 4 The neck is curved rather than straight. There is oxidation on the exterior (Tamura Eiji)
Accessories: head part of the head