The disposal price has been reduced! Member prices are not applicable. 2024/3/22 sales price 168,000 yen Maintained! UK Spendall bookshelf speakers. It has a fresh and cohesive expression, and has an elegant sound typical of being made in England. It's a natural, well-balanced sound that you can't imagine from this size. There are no noticeable scratches on the exterior. Serial 223E11345, 223E11346 (Sato Wataru)
Maintenance information: 2024.3.22 Maintained (separate and disassemble the magnetic circuit and vibration system of the single-sided woofer. Removes iron powder etc. from magnetic circuit slits and prevents corrosion. Cone adhesive peeling repair, coil deformation, round out A vibration system is incorporated into the magnetic circuit to adjust centering. Enter a sine wave and check that there is no vibration or distortion)
Accessories: saran net, jumper plate
Main specifications: bass reflex input 80W sound pressure 88dB impedance 8Ω crossover frequency 4kHz frequency characteristics 60-20kHz W220 x H400 x D280 mm weight 9.5 kg
The price has been drastically reduced! 2024/3/24 sales price 998,000 yen*Upgraded product from KLIMAX DS. A DS/3 model equipped with KATALYST and finally compatible with DSD. A reference model for Lin's network player. This time, a significant upgrade has been achieved by reviewing not only the chip but also the audio circuit. There are some scratches on the exterior. Serial 1322666 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 Operation confirmed (Software: 4.104.518)
Accessories: remote control, power cord
Main specifications: maximum compatible sampling frequency 382 kHz/24 bit DSD11.Line output: XLR balance x 1, RCA unbalance x 1 W350 ✕ H60 ✕ D344 mm weight 10.0 kg
The disposal price has been reduced! Member prices are not applicable. 2024/3/24 sales price 298,000 yen This model was created through an upgrade service performed for users of the first KLIMAX DS. It is packed in a compact housing, and operation buttons, display, remote control, etc. are omitted, but you can enjoy “KLIMAX” quality sound quality, which sets it apart from AKURATE. There are some scratches on the exterior. Serial 1385848 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 Operation confirmed (Software: 4.104.518)
Accessories: power cord
Main specifications: Compatible file formats FLAC/WAV/MP3/AIFF compatible sampling frequency 44.1k/48k/88.2k/96k/176.4k/192 kHz compatible bits 16 to 24 bits output RCA1 system/XLR1 system size approx. W322 x D265 x H50 mm weight approx. 2 kg
The price has been drastically reduced! 2024/3/26 sales price 158,000 yen Maintained by Luxman Service in 2022/10! Line-specific control amplifiers. It's a control amplifier that can be called Luxman's turning point. The volume is well built, and the sound quality is mild and makes you feel thick from low volume. It's soft and supple like a lux, so you can relax and listen for a long time. The exterior has abrasions, scratches, and line marks. Serial A10310255 (Sato Wataru)
Maintenance information: 2022.10.10 Maintained by the manufacturer (each stage phase correction capacitor has been replaced due to deterioration, each part has been inspected, and readjusted. Operation test OK) 2020.10.2 manufacturer maintenance completed (ATT, VR, SW contact cleaning, base solder correction, pilot lamp replacement, operation check of each part)
Accessories: none
Main specifications: 1 CD input system (RCA/XLR switching), line input, 5 systems, frequency characteristics, 5 Hz to 100,000 Hz, SNR ratio, 110 dB or more, line phase sensor dimensions W444 x H120 x D414 mm weight 11 kg
The price has been drastically reduced. 2024/3/15 sales price 398,000 yen Maintained! It is a vacuum tube amplifier that is the younger brother of the Meiki MC275. The moderate stickiness and rich sound are good hues unique to vintage McKinn. It is less rough than the MC275, and you can feel the high level of relaxed musicality. The exterior has oxidation and rust, and there are dents and scratches on the transformer (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (choke transformer rewound repair. Vacuum tube 12BH7 deterioration replacement. Block capacitor 35/80/15 μF defective replacement. 150 μF block capacitors made in Japan → replace 2 with CE ones. Replace 4 0.047 μF film capacitors for defects and deterioration. Replace 3 100 μF electrolytic capacitors and other deterioration. 2 1W resistors and 1/2W deterioration replacements Vacuum tube socket and RCA jack caulk repair. *There is a part of the SP terminal missing. (AC cord has been replaced with Hitachi by another company)
Accessories: No accessories
Main specifications: 25W+25W vacuum tube 7591 (output tube), 12BH7, 12AU7, 12AX7 W232 x H178 x D368 mm 15.4 kg
We've reduced the price! 2024/3/27 sales price 148,000 yen Maintained. Vacuum tube stereo power amplifier. A bright, fresh sound typical of DYNACO. The middle range is thick and has a sense of temperature, and it sounds more powerful than I expected. This is an amplifier I want to play in combination with JBL, Altec, etc. There are scratches and oxidation on the exterior (Tamura Eiji)
Maintenance Information: 2024.3.27 Maintained (Electrolytic Capacitors, Fuse Holders, and AC Cords due to faulty and deteriorated AC cords, additional screws, solder correction, vacuum tube pin cleaning. Bias check output audio check. (Can be operated at AC100V)
Accessories: No accessories
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
We've reduced the price! 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. Internal all-check, Lch power stage Tr x 3 large leak DC cut C, gain setting C off → replace. (No AC line fuse, installation, operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Interior and exterior maintenance has been completed, including all exterior paint! One of Japan's leading monitor speakers, which continued to be made over a long period of 23 years from 1974 to 1997. The clear sound image of the Beryllium tweeter+scoker is an straightforward woofer that attractively reproduces the detailed expressions of even the latest recording discs. It is no exaggeration to say that this model is a timeless masterpiece. Serial 48037L 48037R (Hiura Katsuji)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Digital BNC cable 0.6m Yanagida audio cable with a neutral, unmistakable character. Let me ask how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 1.3 m pair No. 3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none