Maintenances such as main volume and switch disassembly contact polishing have been completed! The first model of the A-1000 series. The panel layout and side wood, which are similar to the older brother A-2000, are a very eye-catching design. It inherits the natural Yamaha sound, and it can handle a wide range of music genres. The exterior has dullness and scratches. Serial 01507 (Fujisawa Yukishi)
Maintenance information: 2026.5.23 Maintained (button mounted. Bad output relay contact replacement. Push switch disassembly contact polishing. Remote switch disassembly contact polishing. Main volume disassembly contact polishing. (I/O pin jack polish.)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) W473 x H159 x D x 434 mm 16.5 kg
The price has been reduced. 2026/3/20 sales price 69,800 yen Maintained! A pre-main amplifier developed with the aim of achieving driving capability that enables optimal playback at all times without being affected by differences in speaker size or impedance. Please experience the natural and powerful sound typical of Yamaha (Daiki Goto)
Maintenance information: 2026.3.20 Maintained (disassembly contact polishing due to switches. Output relay and headphone relay contact defect replacement. Disassemble and clean the rear panel, etc. (I/O pin jack polish)
Accessories: none
Main specifications: power consumption 260 W rated 185 W+185 W (6 ohms) W473 x H171 x D448 mm 20 kg
Famous machines are back! Thorough maintenance was carried out from the exterior to the interior, such as exchanging terminals. In addition to the sound quality, we are also concerned about the appearance, from the feel of the knobs, the texture of the wood grain, to the frame and screws. It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. It's been half a century since it went on sale, but the brillium diaphragm unit and precise cabinet, which have become rare in modern times, far from being comparable to other current speakers, stand out even more (Oikawa Tetsuji)
Maintenance information: 2026.4.27 Maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network maintenance: frequency characteristic check/ATT cleaning/terminal replacement, unit detachment)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 40 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 8 ohms output sound pressure level 90 dB dimensions W375 x H675 x D326 mm weight 31 kg/bottle
It hasn't been in stock in a long time! The younger brother model of the NS-1000M. Equipped with a carbon woofer and beryllium tweeter, this is an attractive car with a transparent sound reminiscent of the NS-1000M. The exterior state is dull over time, scratches on the top plate, slight oxidation on the unit frame, holes in the saran net, and cracks in the saran net frame. Serial 103252/103252 (Yamato Yuki)
Maintenance information: 2026.5.24 Operation confirmed
Accessories: saran net
Main specifications: 3-way, 3 speakers, sealed bookshelf type, 40 Hz to 20,000 Hz, 91 dB, 6 ohms, W374 x H678 x D324.5 mm, 23.5 kg
The best-selling model of the domestic bookshelf monitor has arrived. It has received high praise from professionals, so much so that it has been adopted by active studios. It has a sense of volume greater than its size and a clear mid to high range, making it suitable for playback of all genres. On the exterior, you can see paint bald spots and scratches, and stains and yellowing on corn paper. Serial 203952L, 203952R (Fujisawa Yukishi)
Maintenance information: 2026.5.10 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speaker sealed system bookshelf type playback frequency band 60 Hz to 20,000 Hz crossover frequency 2,000 Hz impedance 8 ohms output sound pressure level 90 dB W215 x H382 x D199 mm 6 kg
A new dust cover has been created, and maintenance has been carried out over a wide range of topics, from motor bearing lubrication to arm disassembly, cleaning, and grease up! A popular model of Japanese record players. The chassis is tightly solidified into a heavyweight platter and a high-torque direct drive motor that rotates accurately and incomparably. It is a model that can be said to be the crystallization of Japanese craftsmanship, which has been thoroughly built using the direct attack method and enhanced physical characteristics. The heavy, thick sound that cannot be enjoyed with current direct drive players is attractive (Oikawa Tetsuji)
Maintenance information: 2026.5.11 Maintained (motor bearing cleaning and lubrication. Arm lifter disassembly cleaning grease up. Tone arm disassembly cleaning grease up. Electrolytic capacitors and XLR connectors (rear external power input terminals) replaced with new ones. Operation SW disassembly, polishing, cleaning grease up. Removing arm lifting screws, fixing screw threads, and adding screws. Check turntable rotation speed, check arm operation, and needle pressure. Check turntable rotation and electronic brake operation by connecting to an external power source. (Simple cabinet cleaning, sound test, other operation confirmation dust cover creation)
Accessories: copy of instruction manual
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W532 x H220 x D388 mm 28 kg
Maintained! In addition to the exterior, this is a pre-main amplifier developed by inheriting A-9 technology! There is no habit, the sound is straightforward and clean, and the finish on the piano is amazing. It has more driving power than it looks, and it's an amplifier that can be enjoyed in a wide range of genres, from classical music to pop music and vocals. The exterior has small scratches and dullness appropriate to aging (Mizusaki Ryo)
Maintenance information: 2026.5.17 Maintained (push switch, remote switch and main volume, slide volume disassembly contact polishing. I/O pin jack polish (The replacement of deteriorated parts has been completed with previous repairs)
Accessories: instruction manual
Main specifications: Phono MM/MC compatible 150W+150W (8Ω) W435 x H144 x D422mm 12.5 kg
Famous machines are back! Thorough maintenance was carried out from the exterior to the interior, such as cabinet polishing, repainting, unit maintenance, attenuator cleaning, and terminal replacement. In addition to the sound quality, we are also concerned about the appearance, from the feel of the knobs, the texture of the wood grain, to the frame and screws. It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The bright sound and high quality of the beryllium diaphragm unit, which have become rare in modern times, and the high quality shine through (Eternity Miraito)
Maintenance information: 2026.5.7 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network maintenance: frequency characteristic check/ATT cleaning/terminal replacement, unit detachment)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 40 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 8 ohms output sound pressure level 90 dB dimensions W375 x H675 x D326 mm weight 31 kg/bottle
The price has been reduced. 2026/5/6 sales price 25,000 yen with dedicated stand SPS-1000MM (list price 15,000 yen per set of 2). It is a compact speaker system developed for theater sound, and is a miniature version of the NS-1000M. The bright 1000M precise, glossy high frequency is excellent. Overall there are scratches, fading, etc. (Oikawa Tetsuji)
Maintenance information: 2026.5.6 operation confirmed
Accessories: dedicated stand SPS-1000MM
Main specifications: 3-way, 3 speakers, sealed system, bookshelf type, anti-magnetic type, use unit/12 cm cone type for low range, 2.5 cm dome type, 1.5 cm dome type for high range, frequency characteristics, 70 Hz to 20 kHz output sound pressure level, 85 dB impedance 6 Ω [main body] W150 x H275 x D180 mm, weight 3 kg/unit [stand]
W290xH538xD320mm weight 3.2 kg/set
Famous machines are back! Thorough maintenance was carried out from the exterior to the interior, such as cabinet polishing, repainting, unit maintenance, attenuator cleaning, and terminal replacement. In addition to the sound quality, we are also concerned about the appearance, from the feel of the knobs, the texture of the wood grain, to the frame and screws. It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The bright sound and high quality of the beryllium diaphragm unit and precise cabinet, which have become rare in modern times (Daiki Goto)
Maintenance information: 2026.4.15 Maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network maintenance: frequency characteristic check/ATT cleaning/terminal replacement, unit detachment)
Accessories: No accessories
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 40 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 8 ohms output sound pressure level 90 dB dimensions W375 x H675 x D326 mm weight 31 kg/bottle