Original manufacturer's original replacement needle for V15 TYPE3. If you have a type 3, how about a spare (Takahashi Nobuyuki)
Maintenance information: 2024.3.24 sound output checked
Accessories: case
Audio-Technica replacement needle. Since there is no compatible cartridge, it has not been checked (Tomoho Asae)
Maintenance information: 2024.3.22 unchecked
Accessories: original box
*Inexpensive because the cantilever is slightly tilted to the right. Empire rare cartridges that were the top brand of MI cartridges in the 1970s. You can feel the depth of the sound traced from the groove of the record, and it's a sound that makes it hard to get tired of listening even when listening for a long time (Murakoshi Yoichi)
Maintenance information: 2024.3.21 sound output confirmed
Accessories: none
Main specifications: MI type 6 mV (5 cm/sec) needle pressure 0.5 to 1.5 g playback frequency band 6-36,000 Hz dead weight 7 g
This is a replacement needle for DENON DL-80MC. A round diamond needle is used as the needle tip. Since it has a high output, it can be used without a head amplifier. The cantilever is slightly to the left. The exterior is dull and there is a feeling of use (Tomoho Asaine)
Maintenance information: 2024.3.22 unchecked
Accessories: original box, instruction manual
Main specifications: interchangeable needle, needle tip shape, round needle, needle pressure 1.75g
Replacement needle for Victor DT-Z1E Since there are no compatible cartridges, it has not been checked (Tomoho Asae)
Maintenance information: 2024.3.22 unchecked
Accessories: original box brush
Replacement needle for AT-15SA and AT-15ea. Since there is no compatible cartridge, it has not been checked (Tomoho Asae)
Maintenance information: 2024.3.22 unchecked
Accessories: original box
This is a replacement needle for Ortfon's FF-15mk2. Since there are no compatible cartridges, it has not been checked (Tomoho Asae)
Maintenance information: 2024.3.22 unchecked
Accessories: none
Shure V15 Type3 replacement needle Super Analog Stylus (SAS) needle made by JICO. It is a needle tip shape that aims for reproduction that is more faithful to the original sound. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.22 sound output confirmed
Accessories: original box
Key Specifications: Compatible Cartridge V15TYPE3
A mono needle made by JICO. Operation has been checked on M44-7. It is a mono needle with the volume and strength of the bass, which is characteristic of the M44G, brought to the forefront (Asaine Tomoho)
Maintenance information: 2024.3.22 sound output confirmed (operation checked on M44-7)
Accessories: no accessories
Genuine replacement needle for Shure MM type high end cartridge M97. Domestic external products are easy to obtain, but originals from that time are valuable. (Yamato Yuki)
Main specifications: MM oval needle needle pressure 0.75-1.25
*The stylus is a Shure VN35MR. It has been replaced with a JICO 192-VN35E replacement needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.3.22 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Micro MM Cartridges The range isn't very wide, but it makes me hear a rich sense of volume in the mid to low range. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.3.20 sound output checked
Accessories: none
Main specifications: mm type output voltage 4 mV dead weight 4.5 g needle pressure 1.5 g
A very rare cartridge from the 60's. Sound with a solid thickness and core. In addition to dullness and small scratches on the exterior, there is a feeling of use, such as the needle tip being bent to the right and part of the lettering has disappeared (Hiroki Aso)
Maintenance information: 2024.3.20 sound output checked
Accessories: none
Main specifications: mm needle pressure is 2 to 3 g
※There is no compatible cartridge, so it has not been checked. Replacement needle for Audio-Technicavm type cartridge AT23. If you use it, be sure to use it as a stock. There is no bending or sticking to the cantilever, and the stylus is clear and sharp (Tamai Jun)
Maintenance information: 2024.3.16 unchecked
Accessories: original box screwdriver
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Oikawa Tetsuji)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: needle cover
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
It has been replaced with a JICO 192-VN35E replacement needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Oikawa Tetsuji)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The sound is clear and bright, and it plays particularly popular music very well. This cartridge is suitable for introduction to analog. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: none
Main specifications: VM type needle pressure 1.5 g to 2.5 g dead weight 5.8 g
Orthophone MM cartridges with high cost performance. Although it is an inexpensive model, the cartridge has a solid sound, and is sharp and easy to listen to. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: original box instruction manual needle cover
Main specifications: MM type 20 Hz to 21 kHz output voltage 4 mV needle pressure 1.75 g
OrtoFon MI Cartridges It was in the heyday of analog, and you can enjoy a slightly different sound from modern cartridges. Since the headshell is integrated and its own weight is light at about 6.5 g, we recommend a lightweight arm. You can see a feeling of use such as dullness on the exterior (Jun Tamai)
Maintenance information: 2024.3.17 sound output confirmed
Accessories: None ※No needle cover
Main specifications: Mi type output 3 mV playback frequency band 20 to 25,000 Hz needle pressure 1.2 to 1.8 g (optimal 1.5 g) dead weight 6 g (actual measurement)
It is an MI type cartridge that easily traces sound grooves with a needle pressure of 1 g. It makes me listen to a sound with a glossy flavor typical of an orthophone. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.17 sound output confirmed
Accessories: none
Main specifications: MI type 5 mV optimal needle pressure 1 g playback frequency band 20-20,000 Hz load resistance 47 kΩ needle tip oval dead weight 5g
It is a model with improved reliability and durability, such as having thicker gold plating on the electrical contacts than the AT30E. The sharp high frequencies resonate comfortably with a refreshing warm color sound. On the exterior, you can see dullness on the body, but the cantilever is straight, the stylus is clear, and sharp (Asaine Tomoho)
Maintenance information: 2024.3.17 Sound output operation confirmed
Accessories: No accessories
Main specifications: MC type output voltage: 0.4 mV needle pressure: 1.2 to 1.8 g (optimal 1.5 g) playback frequency band: 15-50,000 Hz needle tip: 0.3 x 0.7 mil oval dead weight: 5.0 g
Unspecified MM cartridges. It seems that it came with a popular class record player. I was able to confirm the sound output with 1.5g needle pressure (Kanai Hidetsugu)
Maintenance information: 2024.3.14 sound output confirmed
Accessories: none
Main specifications: mm type dead weight 5g
Maintained! Since there are repair marks on the cantilever, it is inexpensive. An improved model of the TSD-15 for consumer use. The low and high frequencies are just the right amount, and the density and extrusion of the midrange is amazing. (KOSHIHAMA Yasuhito)
Maintenance information: 2024.3.16 Maintained (damper replacement, dismantling and cleaning)
Accessories: original box
Main specifications: MC type 1 mV single crystal diamond super fine line stylus needle pressure 2.0 to 2.5 g impedance 20 ohms dead weight 12.0 g
An A-shell oval needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 416842 (Mizushima Itsuro)
Maintenance information: 2024.3.16 Operation confirmed
Accessories: none
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
Comes with a red badge and original box. Mono cartridge CG25D. It is a staple and highest peak for mono needles. The sound is precise, thick, and thick. The unique sense of density, which is different from stereo needles, is attractive. You can fully enjoy the original amount of information on the mono edition. Serial 039724 (Mizushima Itsuro)
Maintenance information: 2024.3.16 Operation confirmed
2015.9.15 Maintained (damper replaced, coil glued)
Accessories: original box (cushioning material has deteriorated)
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g, dead weight: 32 g
SPU-GE reprint model, popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. The cantilever is pointing very slightly to the right. Serial B050 (Mizushima Itsuro)
Maintenance information: 2024.3.16 Operation confirmed
Accessories: original box
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
※There is no compatible cartridge, so it has not been checked. Replacement needle for SONY ND-15G If you use it, be sure to stock it. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.3.16 unchecked
Accessories: case
2M series RED The good sound and fluttering energy typical of an orthophone are attractive. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.2.13 sound output confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
Maintained! CG25D is a staple mono needle and is the highest peak. The precise, thick, and thick sound brings out a unique sense of density that is different from stereo needles. The exterior has dullness etc. due to use over time. Serial 136710 (Takahashi Nobuyuki)
Maintenance information: 2024.3.15 Maintenance completed (damper replacement coil attached)
Accessories: original box
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
It is the cartridge that came with the DENON record player DP-37F, and is perfect for getting started or as a backup. My body feels rusty (Murakoshi Yoichi)
Maintenance information: 2024.1.15 sound output confirmed
Accessories: none
Main specifications: MM type 2.5 mV playback frequency 20 Hz to 30 kHz needle pressure 1.5 to 2.1 g dead weight approx. 5 g
※The needle has been replaced with a replacement. This is an M75 series ED type 2 with light needle pressure. It is characterized by a sharp and clear sound, and makes 70s jazz etc. sound more like those days (Mizusaki Ryo)
Maintenance information: 2024.3.12 sound output confirmed
Accessories: none
Main specifications: mm type oval needle output 5 mV impedance 47 kΩ needle pressure 0.75 to 1.5 g dead weight 6 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts (Asaine Tomoho)
Maintenance information: 2024.2.9 operation confirmed
Accessories: None ※ needle cover missing
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Maintained! A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of a studio from each era and even the heat of the performance. You can enjoy a thick and powerful sound (Hiura Katsuji)
Maintenance information: 2024.3.12 Maintained (needle removed, cantilever bent, damper replaced)
Accessories: none
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
The price has been reduced. 2024/2/6 sales price 16,800 yen. It is a model with a headshell that uses a lightweight solid oval needle and reproduces a wide range. The sound quality is bright and lively, so you can enjoy it regardless of genre. The exterior is generally good (Murakoshi Yoichi)
Maintenance information: 2024.2.6 sound output confirmed
Accessories: head shell, original box
Main specifications: VM type playback frequency range 20 to 25,000 Hz output voltage 4.5 mV needle pressure 1.8 to 2.2 g external dimensions H213 x W210 x D604 mm weight 16.8 g
DENON high output MC cartridges. Can be used without a head amplifier. Compared to the DL-103, the sound is detailed, delicate, and clear. The cantilever is slightly to the right (Sasaki Shota)
Maintenance information: 2024.3.11 Operation confirmed
Accessories: none
Main specifications: MC type output 1.6 mV frequency band 20 Hz to 45,000 Hz needle pressure 1.8 dead weight 5g
This is an M75 series ED type 2 with light needle pressure. It is characterized by a sharp and clear sound, and makes jazz etc. from the 70s sound more like those days (Sasaki Shota)
Accessories: none
Main specifications: mm type oval needle output 5 mV impedance 47 kΩ needle pressure 0.75 to 1.5 g dead weight 6 g
Empire Cartridges Like an American product, it has good sound separation, and it has a crisp and energetic sound. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.3.10 sound output confirmed
Accessories: none
Main specifications: IM type output voltage 3.8 mV playback frequency band 20 Hz to 20 kHz elliptical needle needle pressure 0.75 to 2 g dead weight 5.3 g
Comes with original box! This is BLUE from the 2M series. Ortofon's popular series with a wide range and lively sounds. It makes you enjoy sharp sounds from popular to jazz (Takasaki Atsushi)
Maintenance information: 2024.3.9 sound output confirmed
Accessories: instruction manual, original box, needle cover, mounting screws, brush
Main specifications: mm type output voltage 5.5 mV frequency characteristics 20 to 25,000 Hz internal resistance 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
※Since the cantilever is on the right, it is inexpensive. Replacement needle for EPS-270SD Since there is no main unit, operation has not been confirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Comes with original box. This light needle pressure cartridge is described as the greatest masterpiece of the long-established SATIN. Using a solid beryllium cantilever, the clear high range is attractive (Oikawa Tetsuji)
Maintenance information: 2024.3.5 operation confirmed
Accessories: original box, needle cover, instruction manual
Main specifications: MC type output voltage 1.5 mV needle pressure 0.3 to 1.2 g playback frequency band 8 to 60,000 Hz load resistance 30 to 200 ohms 0.1 x 2.5 mil conic needle dead weight 9.2 g
Rare MC cartridge with interchangeable needles. It has a bright sound, and the sound quality is perfect for pop music, rock, etc. There is a feeling of use such as dents on the body (Takasaki Atsushi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: MC type playback frequency band 20 Hz to 50 kHz output voltage 0.3 mV internal impedance 20 ohms suitable needle pressure 1.3 to 1.7 g dead weight 4.7 g
Technics MM Cartridges It is T4P standard and can be used for SL10, etc. It has a neutral sound typical of the company. There is slight dullness throughout (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: mm type proper needle pressure 1.25 g dead weight 6 g
Good product with instruction manual, warranty card, characteristics table, etc.! Technics' masterpiece cartridge that uses pure boron cantilever. It is a neutral and careful Japanese-tone playback sound typical of the company. serial 080284 (Murakoshi Yoichi)
Maintenance information: 2024.3.6 sound output confirmed
Accessories: head shell SH-98D, instruction manual, warranty card, characteristic table, needle cover, cleaning brush
Main specifications: MC type cartridge 0.2 mV 30 ohms needle pressure 1.5 g dead weight 6.7 g
A good product with a full range of accessories such as the head shell SH-98, instruction manual, cleaning solution, etc. This MM type cartridge is the standard model of the 205C-2 series, and the needle and body can be used interchangeably. A one-point suspension system using samarium cobalt magnets has been adopted, and the power generation part has the same structure as the EPC-205C-2H. Serial 060452 (Murakoshi Yoichi)
Maintenance information: 2024.3.6 sound output confirmed
Accessories: head shell SH-98, needle cover, instruction manual, cleaning liquid, original box
Main specifications: mm type output voltage 3.5 mV needle pressure 1 to 1.5 g playback band 10 to 40,000 Hz dead weight 6.5 g
※There is no compatible cartridge, so it has not been checked. Replacement needle for Ortopone VMS20EMK2. How about using it as stock (Jun Tamai)
Maintenance information: 2024.3.5 unchecked
Accessories: original box
Main specifications: elliptical needle output 5 mV playback frequency band 20 Hz to 20,000 Hz needle pressure 1 g
Comes with original box, brush, and tools A cartridge that makes you feel delicate and just the right amount of warmth. SPU has symmetrical sound quality, and it expresses classical music etc. with a high sense of transparency and beautiful tone (Oikawa Tetsuji)
Maintenance information: 2024.3.5 operation confirmed
Accessories: original box, instruction manual, tools, brush
Main specifications: MC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 Ω internal impedance 3 Ω dead weight 7 gMC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 Ω internal impedance 3 Ω dead weight 7 g
Comes with original box A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. The needle tip is good (Oikawa Tetsuji)
Maintenance information: 2024.3.5 operation confirmed
Accessories: original box, needle cover, instruction manual, brush
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Comes with original box A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. The needle tip is good (Oikawa Tetsuji)
Maintenance information: 2024.3.5 operation confirmed
Accessories: original box, needle cover, instruction manual, brush
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The cartridge has both a delicate and clean sound and high traceability, and I feel that the cost performance is so high that it seems luxurious for everyday use. The body is dull and faded, but the needle tip is good
Maintenance information: 2024.3.5 sound output confirmed
Accessories: none
Main specifications: Playback frequency band 10 to 20,000 Hz output voltage 4.0 mV needle pressure 1.5 g standard micro linear needle
Elliptical type with built-in step-up transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. Appearance, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g