3-way specification! Precise balance adjustments and crossover frequencies can be arbitrarily changed by independent left and right level control from 0 to -40 dB, and it has a time alignment function, which is the greatest appeal. There is a small scratch on the front (Sasaki Shota)
Maintenance information: 2024.10.19 Operation confirmed
Accessories: manual, power cable
Main specifications: 2 way specification D/A converter 24 bit MDS system frequency characteristics 0.5 to 50,000 Hz SN116 dB dynamic range 112 dB power consumption 25 W size W475 x H171 x D405 mm mass 18 kg
Default 2-way specification. Precise balance adjustments and crossover frequencies can be arbitrarily changed by independent left and right level control from 0 to -40 dB, and it has a time alignment function, which is the greatest appeal (Sasaki Shota)
Maintenance information: 2024.10.19 Operation confirmed
Accessories: manual, power cable
Main specifications: 2 way specification D/A converter 24 bit MDS system frequency characteristics 0.5 to 50,000 Hz SN116 dB dynamic range 112 dB power consumption 25 W size W475 x H171 x D405 mm mass 18 kg
Maintained! JBL UREI standard channel divider. It is a 2-way/500Hz specification. A must have for multi-channel systems in 70s PA systems. There is a feeling of use such as small scratches and dullness. ※The balance connection is No. 3 HOT. Serial 06040 (Mizushima Itsuro)
Maintenance information: 2024.10.25 Maintenance completed (left and right crossover measurement check, damping check. Internal filter C and coupling C replacement)
Accessories: none
Key Specifications: Crossover 500 Hz W483 ✕ H44 ✕ D194 mm Weight 1.8 kg
Accuphase channel divider for 2way/3way 500Hz/2 way board included! You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. As for the exterior, there are scratches and dirt on the top plate. Serial I8X071 (Yonejima Satoshi)
Maintenance information: 2023.12.15 Maintained (phase correction capacitor and coupling capacitor replacement. Solder correction. Added 2 missing screws. Card edge contact cleaning The RCA jack plate is loosened and tightened. (Voice check for each input/output)
Accessories: copy of instruction manual, power cable
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
This is an Accuphase channel divider for 2way/3way. 800Hz (CB800) and a 2-way board are included. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while leaving a good analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2010.8.12 maintenance (coupling capacitor - replacement, power supply electrolytic capacitor - replacement, cleaning of each switch volume contact, solder check, input/output terminal polishing and cleaning, input/output operation check, internal cleaning, etc.)
Accessories: none
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
The price has been reduced. 2024/10/9 sales price 39,800 yen Maintained! A 2-way channel divider with variable frequency. Both LOWPASS and HighPass can be independently adjusted between 600 Hz and 6000 Hz. Detailed settings are possible, and it is a convenient specification (Daiki Goto)
Maintenance information: 2024.10.9 maintained (maintenance contents/power switch circuit wiring correction, rubber foot installation, each volume cleaning, inspection and cleaning, operation confirmation. (Note) This unit does not have a relay circuit, so be sure to turn the power on first and turn off the power last. (Noise comes in when the power is turned on later.)
Accessories: none
Main specifications: 2-way crossover frequency LOWPASS (600, 650, 700, 800, 900, 1000, 1200, 1500, 2000, 3000, 6000 Hz) HIGHPASS (600, 650, 700, 800, 900, 1000, 1200, 1500, 2000, 3000, 6000 Hz) independently variable low and high frequency with left and right independent volume dimensions W400 x H95 x D260 mm weight approx. 3.8 kg