Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
Add search
5 results
1
△Manufacture▽ | △Model/Title▽ | △Price▽ | ▲Arrival date▽

COMPACT-1012U.S.A

Ask 23-40861-23031-00
COMPACT-1012
Manufacture:NEWCOMB
Price: JPY 90,727
U.S.A
Arrival: 2023-12-13 20:12:15
description
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi) Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V). Accessories: none Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg

K4R-600U.S.A

Ask 23-40861-23032-00
K4R-600
Manufacture:NEWCOMB
Price: JPY 86,182
U.S.A
Arrival: 2023-12-29 21:36:41
description
The price has been reduced. 2023/12/29 sales price 99,800 yen Maintenance completed! The design full of oldies is attractive, and Newcam's mono mixer premain for PA. 6L6 is used as the output tube. Channel 1 is compatible with LINE, PHONO, and MIC, and channels 2 to 4 are compatible with microphones. The volume for each channel is around 12 o'clock, and MASTER is used for volume adjustment. There is a feeling of use such as small scratches and paint deterioration appropriate to the exterior model year (Kobayashi Hitoshi) Maintenance information: 2023.12.12 maintenance (master volume disassembly, cleaning repair, MIC input transformer, etc. contact repair, left side front lamp off, 12AX7, 150 μF electrolytic capacitor replacement. Vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 41 to 61 W SP: 8 Ω with rated output AC 100 to 117 V). Accessories: none Main specifications: 6L6 push-pull 60W mono LINE, 1 PHONO system each, MIC4 system W440 x H190 x D350 mm 16.5 kg

SQ38FDJapan

Ask 24-42022-03744-00
SQ38FD
Manufacture:LUXMAN
Original price: JPY 168,000
Price: JPY 216,364
Japan 1974 made
Arrival: 2024-02-20 19:41:01
description
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi) Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK) Accessories: Power cable, copy of instruction manual Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg

SQ38DsJapan

Ask 24-42315-06088-00
SQ38Ds
Manufacture:LUXMAN
Original price: JPY 58,000
Price: JPY 216,364
Japan 1965 made
Shop: Osu shop
Arrival: 2024-03-29 20:01:25
description
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota) Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test) Accessories: copy of the manual Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg

2＋22UK

This item has been sold.You can't purchase now. 24-42096-04397-00
2＋22
Manufacture:QUAD
Price: JPY 407,273 Sold Out
UK 1953 made
Shop: Osu shop
Arrival: 2024-04-12 15:38:54
description
*220V specification, step-up transformer included. The interior has been completely overhauled! A separate amplifier that is popular even today, 70 years after its release. The thickness, luster, and tension of the sound are all emotionally composed, and perfectly express the sound of the instrument. The thick, chewy mid-bass sound is impressive, and the tasteful sound unique to vacuum tubes is impressive (Daiki Goto) Maintenance information: 2024.4.11 Maintained (◎ QUAD2 No. 82073 · 3W resistance deterioration replacement ※ SP impedance wiring is 8 ohms. ◎ QUAD22 · P/U adapter and TAPE adapter missing 2 pieces · main volume cleaning repair and switch contact defect repair · 2 spark killer deterioration replacements · 2 additional 22 μF electrolytic capacitors · gang error reduction measures → 4 1/4 W resistance added for both channel Radio1 only (*Due to the structure of the volume, a small amount of gang errors will occur at scale 2 or less.) ・2 RCA jack deterioration replacements・Vacuum tube socket and RCA jack caulk repair *Operation has also been checked with AC 220V (rated output measured at 21W SP:8Ω) *Step-up transformers use store products) Accessories: step-up transformer, power cable, copy of instruction manual Main specifications: [QUAD22] EF86 × 2 ECC83 × 2 input PHONO, RADIO, TAPE W267 × H89 × D148 mm 3.2 kg [QUAD2] KT66 × 4 EF86 × 2 GZ32 15W+15W W321 × H162 × D119 mm 8.2 kg/unit
5 results
1
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out
  • Your shopping cart
  • Your cart is empty.