The disposal price has been reduced! Member prices are not applicable. 2026/4/30 It will be a mid-range horn driver system with a sales price of 45,000 yen. Since it is for the mid-range, it does not produce high frequencies. It is used in speaker systems such as SENTRY III and SENTRY IVB, and is recommended for those thinking about 3-way. The exterior has dullness and small scratches due to aging. Serial 744 (Yonejima Satoshi)
Maintenance information: 2026.4.30 oscillator check OK
Accessories: No accessories
Main specifications: 8 ohms 500 to 6,000 Hz, 105 dB, crossover 800 Hz, diameter 104 x depth 87 mm, weight 2.2 kg (driver only)
The price has been drastically reduced. 2026/5/15 sales price 69,800 yen Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. There are scratches and rust on the exterior (Hiura Katsuji)
Maintenance information: 2026.5.15 maintained (vibration plate installation adjustment, pad dampener deterioration mounting screws, rust replacement, insulation bushing, deterioration replacement, vibrating plate dirt cleaning.)
Accessories: screws
Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms W145 x D97 mm 5.1 kg
The price has been drastically reduced. 2026/7/13 sales price 59,800 yen. Maintained. This is a JBL mid to high range driver. It is also used in the S2600 and S3500, etc., and the well-balanced sound quality with both strength and subtlety is truly a JBL. It can be used on various systems with easy-to-use specs. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.7.9 Maintained (Speaker terminal replaced with original one. Vibrating plate installation and re-adjustment. Pad dampener replacement, mounting screw rust and insulation bushing replacement)
Accessories: none
Main Specifications: High Range Driver Throttle Diameter 25mm Impedance 8Ω Frequency Range 500Hz to 20kHz Pure Titanium Crossover Frequency 800Hz W147 x H147 x D105 mm 4.3 kg
The disposal price has been reduced. Member prices are not applicable. 2026/7/15 sales price 168,000 yen Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals sound sharp enough to make you think of jazz. The exterior has paint peeling in places. Serial 17612, 17751 (Yonejima Satoshi)
Maintenance information: 2026.6.10 Maintained (diaphragm installation adjustment. Pad dampener deterioration replacement. Dispensing terminal contact area cleaning. Replace mounting screw rust and insulation bushing deterioration. Diaphragm dirt cleaning. DCR (17612 7.2 ohm diaphragm no scratch), (17751 7.4 ohm diaphragm no scratch))
Accessories: No accessories
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
The disposal price has been reduced (member prices are not applicable). 2026/7/19 sales price 49,800 yen ※The left and right labels are different, so it's cheap. Maintained. JBL 1 inch screwdriver Compared to the LE85, you can enjoy a soft and deep sound. The impression is that it is a mild JBL sound. The shape of the left and right logo plates is different (Daiki Goto)
Maintenance information: 2026.7.17 maintained (vibration plate installation adjustment, DCR (41118 10.8om vibrating plate scratch) (40310 12.5 ohm vibrating plate scratch not))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced. 2026/7/13 sales price 69,800 yen. Maintained. An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. In addition to small scratches, appearance, and paint peeling on the diaphragm on one side, a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.7.10 Maintained (pad dampener installation, vibration plate installation adjustment, insulation bushing, mounting screw rust replacement)
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
Maintenance has been completed, such as pad dampeners, insulating bushings, and mounting screws. Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. There is a small wound on one side of the diaphragm (Oikawa Tetsuji)
Maintenance Information: 2026.8.10 Maintained (Pad Dampener Replaced
Insulating Bushing Deterioration Replacement Mounting Screws Rust Replacement
Vibrating plate installation adjustment DCR (44648 6.0 ohm vibrating plate with no scratches) (44860 6.0 ohm vibrating plate small scratches)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg
The price has been reduced. 2026/6/5 sales price 59,800 yen Maintained! * Since the diaphragm is a compatible product (DIA 2425T-16), it is inexpensive. Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. The exterior has bald paint and rust spots. Serial 26137, 26138 (Fujisawa Yukishi)
Maintenance Information: 2026.6.5 Maintained! (Vibrating plate replacement (compatible product), pad dampener, insulating bushing, screw replacement)
Accessories: none
Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms W145 x D97 mm 5.1 kg
The disposal price has been reduced! Member prices are not applicable. 2026/4/14 sales price 69,800 yen Maintained! JBL professional 1" screwdriver It was also installed in the late 4344 model. It is a utility driver that can be used in either 2 or 3 ways because it has a sound with a firm outline, but it doesn't come out too much. The exterior is dull and faded. Also, the rubber ring is slightly loose. Serial 12242/12247 (Tamura Eiji)
Maintenance information: 2026.4.14 Maintained (vibration plate installation adjustment, pad dampener deterioration and insulation bushing deterioration replacement. Mounting Screws, Rust Replacement, Speaker Terminal Mounting Position Correction DCR (1224 6.9 ohm vibrating plate without scratches) (12247 6,7 ohm vibrating plate without scratches))
Accessories: No accessories
Main specifications: 800 to 20,000 Hz 16 ohms recommended crossover 800 Hz 110 dB throat diameter 2.5 cm 4.8 kg
Maintained! JBL's masterpiece 2 inch screwdriver. You can enjoy the rich sound built into a number of famous devices. In particular, the sense of energy and density in the midrange is excellent, and the vocals are sensual. The treble that stretches without impacting your ears is also attractive (Murakoshi Yoichi)
Maintenance information: 2026.8.6 maintained (driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement)
Accessories: mounting screws
Main specifications: 2 inch driver frequency band 500 Hz to 10 kHz crossover 500 Hz or higher sound pressure level 108 dB impedance 16 ohms (measured 20792/7.3 ohms, 20793/6.3 ohms) diameter 180 x depth 130 mm weight 11.8 kg/bottle
The price has been drastically reduced. 2026/6/15 sales price 69,800 yen. Maintained. Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. A feeling of use can be seen on the exterior, dullness, rust, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.6.11 maintenance completed (vibration plate installation adjustment, pad dampener, mounting screw rust and insulation terminal contact part cleaning, insulation bushing deterioration replacement)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg
Maintained! An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. The exterior has paint peeling due to dullness, scuffs, etc. due to aging. Serial 26697/27061 (Yonejima Satoshi)
Maintenance information: 2026.8.2 Maintained (pad dampener insulation bushing, mounting screw rust replacement. Speaker terminal cable attachment defect replacement.)
Accessories: No accessories
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals sound sharp enough to make you think of jazz. Serial 17405 17480 (Murakoshi Yoichi)
Maintenance information: 2026.8.11 maintained (vibration plate installation adjustment, pad dampener and insulating bushing deterioration replacement, mounting screw rust replacement, vibration plate stain cleaning)
Accessories: mounting screws
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
The price has been drastically reduced. 2026/7/29 sales price 99,800 yen This is the first time in stock in 5 years! This is a set of PD-100 screwdriver and PH-101 horn. Aluminum wire is used for the voice coil, and aluminum light alloy foil is used for the diaphragm to achieve a natural sound that feels good on the ears. The stay is corroded, and the main body is scratched over time (Daiki Goto)
Maintenance information: 2026.7.29 Operation confirmed
Accessories: none
Main specifications: PD-100/throat aperture diameter 19 mm 8 ohm playback frequency characteristics 500 to 18,000 Hz output sound pressure level 104.5 dB crossover frequency 500 Hz diameter 132 x depth 120.5 mm 4.8 kg PH-101/multi-cellular horn throat hole diameter 19 mm cutoff 350 Hz W435 x H194 x D391 mm 4.4 kg