The price has been reduced! 2026/3/1 sales price 39,800 yen Altec standard 1 inch 4 sectional horn. It comes with a stay, so it's easy to stand on your own feet. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior is dull and scratched. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
The price has been reduced. 2025/12/22 sales price 39,800 yen Altec standard 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
※1 bottle only. The horn used in the company's CP12II. Details are unknown. According to actual measurements, the throat diameter is 42 mm and the screw pidge is 104 mm.
Accessories: none
Main specifications: W300 x 205 x D165 mm 700 g throat diameter 42 mm screw fidge 10.4 mm (actual measurement)
The price has been reduced. 2025/10/5 sales price 39,800 yen Coral 1 inch horn. It weighs a lot more than the JBL and Altec models of the same shape and comes straight ahead. A crackling and dead sound. A JBL 1-inch driver can also be attached. It's deadlocked. There are a lot of scratches overall (Sasaki Shota)
Accessories: none
Main Specifications: Sectoral Horn Directivity: Horizontal 90° Vertical 40° Cutoff Frequency 250Hz Throat Diameter 2.54 cm W750 x H180 x D580 cm 15 kg
The price has been reduced. 2025/10/6 sales price 39,800 yen Coral 1 inch horn. It weighs a lot more than the JBL and ALTEC models of the same shape and comes straight ahead. A crackling and dead sound. A JBL 1-inch driver can also be attached. It's deadlocked. There are a lot of scratches overall (Sasaki Shota)
Accessories: none
Main Specifications: Sectoral Horn Directivity: Horizontal 90° Vertical 40° Cutoff Frequency 250Hz Throat Diameter 2.54 cm W750 x H180 x D580 cm 15 kg
The price has been reduced. 2026/2/7 sales price 18,000 yen. This is a CORAL 1" sectional horn. JBL 1 inch driver can be mounted. I have the impression that the horn makes few sounds and stretches quickly towards the listener. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: sectional horn, flare cut 400 Hz directional/90 degrees horizontally, 45 degrees vertical dimensions W436 x H183 x D324 mm weight 5.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2026/1/20 sales price 15,000 yen for 1 bottle only. Electric voice 2 inch horn It's made of resin, so it's not as tough as metal, and you can listen to a three-dimensional sound that is easy to hear. It is a convenient specification that allows a JBL 2-inch driver to be attached. Scratches can be seen near the screw mounting holes. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: 2 inch horn driver directionality/horizontal 90° (500 to 20 kHz) vertical 40° (1200 Hz to 20 kHz) mounting part outer diameter: 128 mm (actual measurement) throat diameter: 50 mm (actual measurement) screw pitch (diagonal) 102 mm (actual measurement) W534 x H333 x D278 mm (actual measurement) 3.0 kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2024/9/25 selling price 20,000 yen horn with unknown details. The diameter of the driver mounting hole is about 32 mm (actual measurement) (Oikawa Tetsuji)
Main specifications: W197 x H118 x D100 mm weight 380 g/1 bottle
The price has been drastically reduced. 2025/10/6 sales price 69,800 yen JBL large professional radial horn. Attach a 2 inch driver such as the 2440 and enjoy the exhilarating sound. The strong sound pressure that comes straight out is impressive. It is also recommended as an introduction to large horns. This time, a stay has been attached. There are wounds and dullness (Sasaki Shota)
Accessories: none
Key Specifications: Crossover Frequency 500 Hz Horizontal 90 Degrees Vertical 40 Degrees
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are some threads and paint peeling on the exterior. (TAMURA Eiji)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. There is paint peeling. Serial 4947/6149 (Tamura Eiji)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
Genuine JBL diffuser This item is recommended for those who have stocked or damaged it. There is a part of the exterior where part of the wing is missing (Sasaki Shota)
Accessories: none
The price has been reduced. 2026/3/24 sales price 49,800 yen Raft Craft 1 inch wooden horn, crossover 750 Hz or more. If you have a metal horn and feel that the sound is a little stiff, I definitely want you to try this product. Compatible with TAD, FOSTEX, JBL, etc. drivers. There are marks of legs attached to the exterior and bottom, and in addition to the veneer being peeled off, a feeling of use such as dullness, abrasions, and marks can be seen (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: crossover 750 Hz or more, W415 x H150 x D305 mm, approx. 6 kg, screw pitch 50 mm