Backload enclosure for 20cm unknown from the manufacturer. It is made of plain wood plywood and is well made (Itsuro Mizushima)
Accessories: None
Main specifications: unit opening diameter 183mm W252 × H590 × D300mm 8.8kg
The price has been drastically reduced. 2022/5/3 selling price 150,000 yen Great Plains Audio (ALTEC) 515-8HHP was installed. An enclosure for a mane pine 38cm woofer. The side has a thickness of 40 mm, and it is quite robust. A self-made trolley is included. There are small scratches. One saran net dowel is broken. * Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: self-made trolley
Main specifications: Baffle opening diameter 355mm from screw to screw 370mm (diagonal) W680 × H900 × D556mm (actual measurement)
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
An enclosure that seems to be for Sansui's old system component speakers. The lattice box with legs reminiscent of JBL's Baron and Bicount is really fashionable. The lattice on both the left and right is out of the frame. There are traces of internal remodeling (Fujisawa Koshi)
Accessories: None
Main specifications: opening diameter 212mm (screw pitch 240mm), aperture diameter 110mm (countertop 170mm, screw pitch 140mm), opening diameter 95mm (for bass reflex port/wood screw pitch 118mm), aperture diameter 70mm (Countertop 92mm, Screw Pitch 104mm) 14mm Particle Board, Veneer Finish W500 × H665 × D430mm 15kg
This is a raw enclosure. Why don't you fit your favorite unit into it? Saran net dowel receiver is attached, but there is no saran net (Yoichi Murakoshi)
Main specifications: W336 × H585 × D316mm 12.6kg
A rectangular enclosure that contains the Tannoy monitor Gold 15 inches. There are no speaker terminals on the back. If you are familiar with your skills, why don't you finish it up in your own style? Many small scratches, dirt on the saran net (Yoichi Murakoshi)
Accessories: None
Main specifications: W596 × H1070 × D368mm 30.2kg
A self-made box enclosure with a JBL tweeter and a 25cm woofer attached. There are a lot of abrasions, but the thickness is solid, and the sound absorbing material is also polite and well-made. Please use it on an external network. There are scratches on the whole, and the color is slightly different on the left and right (Yoichi Murakoshi)
Accessories: Saran net
Main specifications: Opening diameter 226mm, screw pitch 245mm (woofer), 181mm, wood screw fastening from the inside (tweeter) W395 × H645 × D382 16.1 kg (actual measurement)
I cut the price. 2021/10/22 Selling price 69,800 yen The company's classic front load enclosure. There is no logo on the side because the serial is young. The sound jumps well, and even heavier units make sharp sounds. The appearance is a lot of damage such as scratches and paint peeling on the whole. Serial 14804 14805* Because it is a large and heavy item, shipping costs will be estimated separately (Hirotsugu Kondo)
Accessories: None
Main specifications: Front load horn system · floor type enclosure compatible speaker 2205, 2220, etc. Minimum playback frequency 60Hz W752 × H914 × D610mm 46kg
1*OPEN ONLY Unassembled Fostex enclosure kit released by Akira Sumiyama in 2010 in Audio Basic magazine. There are no instructions, assembly drawings, etc. Only one, so please use it for center speakers and production samples (Yoichi Murakoshi)
Accessories: original box
Main specification: packing weight 15.2kg
Price cut (2021.3.9 selling price 40,000 yen) Unspecified enclosure that mimics 828 capable of ALTEC 15 inches. The rear baffle mounting screw is missing. The appearance is matte paint, but there are individuals with a lot of tears and stains, and there are also parts that became brittle and crumble easily.
Accessories: None
Main Specifications: Aperture diameter 338mm Screw diagonal 382mm W760 × H1070 × D610mm Approx. 66 kg/This
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
Price cut (2021.2.22 selling price 59,800 yen) Unknown 38cm double woofer enclosure. It may be made by showa case, but it is unspecified because there is no landmark. The former owner was mounted ALTEC 515C. Overall feeling of use, scratches scattered, there is a hakama lower peeling part. (Takasaki Takasaki)
Accessories: Saran net
Main specifications: Unit opening diameter 355mm plate thickness 35mm W750 × H1180 × D515mm It seems that there are more than 70 kg
We cut the price (2021.2.13 selling price 29,800 yen) Enclosure that seems to be a garage manufacturer item. Mimic the side slit bass refill BOX of Onken. The exterior is carefully built, but the interior cutouts are cluttered. The unit is fixed with wood screws. (Itsuro Mizushima)
Accessories: None
Main Specifications: Unit opening diameter 338mm Plate thickness 24mm W672 × H915 × D480mm Approx. 35kg
Unspecified 3-way enclosure It is a super bargain price with a considerable feeling of use. For experimentation or research, if you are a self-author with confidence in your arm, how about challenging it? (Yoichi Murakoshi)
Main Specifications: W648 x H967 × D457mm 36.8 Kg (Measurement) Woofer opening diameter 300 mm Scoker opening diameter 173mm tweeter opening diameter 102mm
The price has been reduced. 2019/12/8 Sales price 99,800 yen Original product of Yonematsu plywood. JBL classic front load enclosure 4560BK-A You can experience the thick and energetic low frequencies unique to professional models. There is a plate that blocks some network holes, and the screws on the back are missing. (Takimoto Yutaka)
Accessories: None*Back screw missing
Main specifications: Baffle opening diameter 351 mm Screw pitch (diagonal) 370mm W764 × H914 × D611mm Approx. 39.2 kg