2MBlack, the highest peak of the 2M series, is in stock. The stylus tip is equipped with the same high-grade solid diamond shibata needle as the famous MC Jubilee. Pure silver-plated high-purity copper wire is used for the power generation coil. The amount of information at the highest peak of 2M is truly one word. The exterior is dull, and the lettering disappears (Satoshi Yonejima)
Maintenance information: 2022.7.3 operation confirmed
Accessories: original box
Main specifications: Output voltage 5mV Frequency characteristic 20-31,000 Hz Internal resistance 47Ω Appropriate needle pressure 1.5g Dead weight 7.2 g
Mono needles. The current model of the CG25 series, which is an original cartridge for orthophones. It is a Mark 2 with an increase in the glamor typical of the company. It faithfully picks up mono sounds, and has a strong and thick core. If you are a mono fan, it is a gem unique to orthophones that you want to try at least once. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2022.7.2 Operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 1.5mV impedance 2Ω needle pressure 4-5g dead weight 33g
A high-end model that uses 6N copper for the coil winding of the standard cartridge DL-103. The high frequency range is increased compared to the original model. At the same time, the resolution has increased, and the sense of distortion has decreased, so it is intended for audio where you can enjoy music more (Yosuke Kojima)
Maintenance information: 2022.7.2 Operation confirmed
Accessories: original box, needle cover
Main specifications: Round needle tip 16.5 microns Output voltage 0.25 mV Regeneration frequency 20 Hz to 45 kHz Impedance 14 Ω Needle pressure 2.5 g Dead weight 8.5 g
Comes with a replacement needle! The range is wide, and the fineness stands out among DJ needles. Durable enough to withstand heavy use, and excellent needle visibility. The exterior is dull (Satoshi Yonejima)
Maintenance information: 2022.6.28 Operation confirmed
Accessories: instruction manual, original box
Main specifications: mm type dead weight 20g Output voltage 6mV Frequency characteristic 20-22,000 Hz Impedance 47Ω Elliptical needle appropriate needle pressure 3g
A cartridge that can be said to be the standard for domestic MC needles. The resolution of the mid-high range is high, and the clear and crisp tone is attractive. The appearance is good (Satoshi Yonejima)
Maintenance information: 2022.6.27 operation confirmed
Accessories: needle cover
Main specifications: MC type playback frequency band 15 to 50,000 Hz output 0.4 mV needle pressure 1.2 to 1.8 g impedance 17 Ω dead weight 6.8 g
*Iron needles are not included. It will be sold as it is due to unconfirmed operation. Cartridges for Denon SP It seems to be for broadcasting stations (Fujisawa Koshi)
Maintenance information: 2022.6.23 operation unconfirmed
Accessories: None
Main specifications: 65.0g (actual measurement)
The price has been drastically reduced. 2021/12/13 Sales price 25,000 yen* Sound was made, but it is cheap because it is easy to distort at the peak. UK Decca Decca Stereo Cartridges It is a sound quality with a unique taste with a rich finish even though it is a dry and taut sound. The degree, including the appearance, is not very good (Oikawa Tetsuji)
Maintenance information: 2021.12.13 operation confirmed
Accessories: None
Main specifications: Body color Gray VR (MM) type V-H matrix generator mechanism 7.5mV needle pressure 2-3g dead weight 5g
LINN's high performance MM type cartridge ADIKT The cantilever is aluminum. It has good notch and strength, and makes JAZZ sound comfortable. Including the cantilever is good (Shota Sasaki)
Maintenance Information: 2022.5.22 Sound output operation confirmed
Accessories: original box, needle cover, manual
Main specifications: mm type needle pressure 1.5g to 2g (1.75g recommended) impedance 47kΩ dead weight 7.0g
It has been maintained. The A-shell elliptical hand features the direct sound of SPU. The crisp, tight, and powerful mid-low range and detailed expressive power are attractive. You can enjoy a tone that is even thicker and richer than the G shell type (Tetsuji Oikawa)
Maintenance Information: 2022.5.23 Maintained (cantilever modified)
Accessories: None
Main specifications: MC type 0.2mV 3-4.5g Internal impedance 2Ω Load resistance 47kΩ Elliptic needle dead weight 28g
The price has been reduced. 2022/5/8 selling price 79,800 yen*A transformer is installed, but the wiring is passed. The rich and rich SPU-like sound is attractive. Serial 134918 (Mizushima Itsuro)
Maintenance information: 2022.5.8 operation confirmed
Accessories: original box
Main specifications: Transformer built-in MC type output 10mV needle pressure 3-4.5g dead weight 32g
※It is a round needle due to maintenance. Universal model that can be used with standard tone arms. It is a long-selling product where you can feel the vividness that seems to make you feel the atmosphere of the studio of each era and the heat of the performance. You can enjoy a thick and powerful sound. The exterior has dullness and paint peeling (Ryo Mizusaki)
Maintenance Information: 2022.5.16 Maintained (We have repaired a new diamond tip round needle at the tip of the needle tip. (There is no problem with volume, CH balance, etc.)
Accessories: none
Main specifications: MC type needle pressure 2.5g impedance 22Ω dead weight 17.6g
An IM type cartridge independently developed by ADC. The impression is that the grain of the sound is clear and sharp. The solid, high-resolution, and dry sound is attractive. The appearance is dull (Satoshi Yonejima)
Maintenance Information: 2022.5.14 Confirmation
Accessories: No accessories
Good quality and affordable Technica MM type cartridges. The sound quality is clean, and the resolution of the mid-high range is high, and the sound comes into your ears quickly. Corrosion is seen on the cantilever and dirt is seen on the body (Daiki Goto)
Maintenance information: 2022.4.19 sound, clearance OK.
Accessories: None
Main specifications: Output 5mV needle pressure 0.9-1.9g (optimum 1.4g) Playback frequency band 18-20,000 Hz Load resistance 47kΩ Needle tip ellipse dead weight 18.5g
The disposal price has been reduced! (Member discount is not applicable) 2021/12/18 Sales price 128,000 yen EMT arm dedicated cartridge for initial SP. It makes you listen to valuable SP records glossy like EMT. The appearance is dull, there are small scratches. * Since it is mono, the output is Rch only, please use the mono changeover switch of the amplifier. The appearance is dull. Serial 23035-73 (Satoshi Yonejima)
Maintenance information: 2021.3.14 maintained (damper replacement, cleaning)
Accessories: needle cover incidences
Main specifications: Moving coil (MC) type output voltage 1.15mV Wavenumber band for regeneration 20 to 30,000 Hz Internal impedance 24Ω Recommended load impedance 100Ω or more (when using head amplifier ) Compliance 12Nm Appropriate Needle Pressure 5.0g Solid Diamond (for Mono LP) Self Weight 37g Tone Arm EMT Only
The disposal price has been reduced! (Member discount is not applicable) 2021/12/18 Sales price 128,000 yen It is a mono cartridge from the era when I was requesting an orthophone. Needless to say, it is dedicated to EMT arms, but it can be used for the initial MONO LP and traces sapphire needles with a needle pressure of 5g. * Since it is mono, the output is Rch only, please use the mono changeover switch of the amplifier. The appearance is dull. Serial 29138-78 (Satoshi Yonejima)
Maintenance information: 2021.12.18 operation confirmed
Accessories: needle cover
Main specifications: MC type needle tip diameter 25 μm Sapphire needle impedance 37Ω (right output) Needle pressure 5g Output voltage 1.15mV Frequency characteristic 30Hz to 15kHz Tracking angle 90 degrees Self-weight 33g
A reprint model of the original SPU of the MC cartridge. It is a valuable model with a unique personality that is not found in other cartridges. The well-balanced sound quality makes you feel like a deep SPU. There is some rust floating on the shell, and the gold color of the original box logo has disappeared (Yoichi Murakoshi)
Maintenance information: 2022.3.16 sound output confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2MV internal impedance 2Ω needle pressure 3-4.5g own weight 31g
Stylus is good! MC cartridge using LC-OFC (linear crystalline, oxygen-free copper) wire based on DL-103. Sound familiar to your ears with a wide range. You can listen comfortably with a supple sound (Fujisawa Yukishi)
Maintenance information: 2022.3.16 operation confirmed
Accessories: needle cover
Main specifications: MC type output 0.25 mV Appropriate needle pressure 2.2 ~ 2.8 g Internal impedance 13 Ω own weight 8.5 g
A VM type cartridge that uses a Technica ATN-3600 type needle tip similar to the entry-class record player attached cartridge of AIWA and DENON. Details are unknown, but the letters MADE IN JAPAN are on the back. A thick and straightforward sound came out with a 1.5g needle pressure. The gain is a little lower. (Hitoshi Kobayashi)
Maintenance information: 2022.3.9 sound output confirmed
Accessories: needle cover
Main specifications: VM type 1.5 to 2.5 g own weight 5.1 g
Universal model that can be used with standard tonearms. It is a long-selling shop where you can feel the atmosphere of the studio of each era and the vividness that seems to be felt even the heat of the performance. You can enjoy a thick, powerful sound. The cantilever is slightly to the right. There are adhesion correction marks on the needle tip (Oikawa Tetsuji)
Maintenance information: 2022.3.13 operation confirmed
Accessories: None
Main specifications: MC type needle pressure 2.5g impedance 22Ω own weight 17.6g
The price has been drastically reduced! 2021/12/18 selling price 99,800 yen It is a cartridge for monaural SP in the era when I was requesting Orthophone. Needless to say, it is dedicated to the EMT arm, but it can be used on the SP board of the shellac board and traces the sapphire needle with a needle pressure of 9g. * Since it is mono, the output is Rch only, please use it with the mono changeover switch of the amplifier. The appearance is dull (Satoshi Yonejima)
Maintenance Information:2021.3.14 Maintained (Damper Replacement, Cleaning)
Accessories: No accessories
Main specifications: needle tip diameter 65μm sapphire needle impedance 25Ω (right output) needle pressure 9g output voltage 0.85mV frequency characteristics 30Hz to 15kHz tracking angle 90 degrees dead weight 37g
Universal model that can be used with standard tone arms. It is a long-time seller where you can feel the atmosphere of the studios of each era and the vividness that seems to be felt even in the heat of the performance. You can enjoy a thick, powerful sound. The appearance may be dull or paint peeling. Serial 9992-14 (Satoshi Yonejima)
Maintenance information: 2022.2.20 operation confirmed
Accessories: original box
Main specifications: MC type needle pressure 2.5g impedance 22Ω dead weight 17.6g
* It is cheap because it is in poor condition. MC cartridge using LC-OFC (linear crystalline, oxygen-free copper) wire based on DL-103. Sound familiar to your ears with a wide range. You can listen comfortably with a supple sound. The cantilever is slightly bent, and there is a feeling of use such as sticking marks. Serial 1243 (Takasaki Atsushi)
Maintenance information: 2022.2.2 sound output confirmed
Accessories: needle cover
Main specifications: MC type output 0.25mV Proper needle pressure 2.2~2.8g Internal impedance 13Ω Self-weight 8.5g
External replacement needle for the Empire 108 cartridge. Put it on the main unit and sound is confirmed. Needle tip is good (Yasuhito KOSHIHAMA)
Maintenance information: 2021.8.19 shop front operation confirmed
Accessories: original box
Unopened Replacement needle for Columbia/Denon cartridge, PU-1270, PU-1280, SPC-310 It is unchecked for replacement needle only. (Hitoshi Kobayashi)
Accessories: case
Unopened Columbia/Denon cartridge, replacement needle for PI-1557, PI-1623 It is unchecked for replacement needle only. (Hitoshi Kobayashi)
Accessories: case