The price has been drastically reduced. 2025/3/10 sales price 8,000 yen. A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.3.5 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 line each, W103 x D127 x H38 mm 1.4 kg
A rare item that arrived for the first time in about 10 years! Lock nut stabilizer for Audiocraft Arm AC-3000MC/4000MC. It is a sturdy construction with machined brass (Oikawa Tetsuji)
Accessories: none
Main specifications: self weight 700g
Stand for DS-1000HR It is a well-built wooden speaker stand, and the roundness and wood texture typical of Diaton are nice. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W370 x H253 x D300 mm 5.26 kg
This is a speaker stand for the DS-1000Z. If you've been looking for one, take this opportunity! In addition to the exterior and stickiness of the sticker on the top plate, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W360 x H183 x D300 mm 9.1 kg
MICRO1500/3000/5000/8000 arm base It is an arm base with a heavy weight and excellent sense of stability. The previous owner mounted an AC-3000 Silver. There are scratches and stains (Sasaki Shota)
Accessories: none
Main specifications: measured weight 4.7 kg
The price has been drastically reduced! 2025/4/9 sales price 99,800 yen A line transformer carefully rolled up with handmade craftsmanship. You can aim for deep skeletal tones and sounds, and low frequencies with a low center of gravity. There are conspicuous scratches, paint peeling, and scratches on the exterior (Yonejima Satoshi)
Maintenance information: 2025.4.9 operation confirmed
Accessories: No accessories
Main specifications: W210 x H100 x D190 mm (not including terminals) Weight approx. 9.5 kg
Set of 2 24K gold-plated coated RCA plug It is a type that can be used for both soldering and screwing, and the hot part uses a screw fastening type with a hexagonal screw. A collet chuck type is used to connect to the RCA jack to prevent falling off and achieve reliable contact (Kobayashi Hitoshi)
Accessories: none
This is a genuine speaker stand for the DS-1000ZA. If you've been looking for one, don't miss this opportunity. There are some rolled veneer (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W360 x H195 x D300 mm 6.2 kg
This is a wood cabinet for the company's FM stereo tuner F3. If you've been looking for one, don't miss this opportunity. There are line scratches and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W468×H206×D389mm
The price has been reduced. 2025/4/25 sales price 79,800 yen Driver unit for Stax ear speakers. Adopts a non-magnetic housing, which is Stax's policy. Coupling capacitors have been abolished from input to output to reproduce clear, detailed sound quality with high resolution (Yoichi Murakoshi)
Maintenance information: 2025.4.15 sound output confirmed
Accessories: power cord
Main specifications: input impedance 50 kΩ (50 kΩ x 2 when balanced) dimensions W195 x H103 x D420 mm weight 5 kg
The price has been reduced! 2025/3/4 sales price 12,000 yen This is a phase plug for the B&W 800 series. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: dead weight approx. 260 g (actual measurement) /piece
A volume controller ideal for adjusting the volume of active speakers. By connecting to an active speaker equipped with an amplifier, the volume of the left and right speakers can be controlled collectively at hand. It is convenient when listening to music or watching DVDs on a computer etc. (Tomoho Asaine)
Maintenance information: 2025.4.26 operation confirmed
Accessories: original box connection cable
Main specifications: stereo mini jack x 1 output RCA W52 x H37 x D60 mm dead weight approx. 120 g
The price has been reduced. 2025/2/7 sales price 35,000 yen*It is cheap because there are many stains on the base on one side. Genuine stand for B&W 805 series. It can be used not only for 805 but also as a stand for small speakers. Can be used up to 805 Diamond series (Mizushima Itsuro)
Accessories: instruction manual, spikes, screws
Main specifications: W280 x H640 x D365 mm 9.45 kg (actual measurement)
DENON DP-3700F cabinet The DP-3000 phono motor can be mounted. The exterior has scratches and dullness (Katsuji Hiura)
Accessories: none
Main specifications: W530 x H180 x D440 mm weight 10.8 kg
UK Watts record cleaner. This is a wet cleaner that is used by soaking water into the core. The exterior has a feeling of use. There is a slight yellowness on the core (Kanai Hidetsugu)
Accessories: none
Main specifications: diameter 25 x length 105 mm weight 15 g (actual measurement)
Audiocraft brass disc stabilizer Stable playback is possible with a tight weight. Comes with a stroboscope, which is convenient (Oikawa Tetsuji)
Main specifications: diameter 79 mm x height 20 mm weight 730 g
An evolved version of the long-selling FI-15 Plus series. It features a new plating method with improved sound quality and improved durability, and the newly developed cable clamp controls stable grip and resonance. By reducing the external dimensions, it is characterized by a slim shape that is compatible with various devices that could not be used until now (Oikawa Tetsuji)
Accessories: original box
The disposal price has been reduced! (Member prices are not applicable) 2023/11/7 sales price 79,800 yen ※It is cheap because the condition is not very good. Comes with an ottoman. Among the company's many Stressless chairs, it is the most compact model and has a simple design that fits any room. It supports your lower back with a firm sitting comfort. On the exterior, the leather is worn and has wrinkles and peeling. (Miura Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm seat height 380 mm ottoman: W550 x H400 x D420 mm
This is only the horn part for the JBL tweeter 075. How about for a replacement, etc. The exterior has stains, stains and dullness (Tamura Eiji)
Accessories: No accessories
The price has been reduced! 2025/3/22 sales price 20,000 yen genuine Electri product. This is a Macintosh speaker control relay. It is a convenient selector that is exclusive to models equipped with a 9pin terminal (SCR terminal) on the back, such as the Mackin Pre-C40 and Primain MA6800, and allows you to switch between 2 speakers and control the power supply of the power amplifier with a switch on the front panel of the device. Serial JDV2077 (Tamura Eiji)
Accessories: 9Pin connection cord
Key Specifications: Speaker Control Relay Dimensions W320 x H75 x D65 mm Weight 1.2 kg
If you're looking for a set of 4 Y rugs unopened, take this opportunity! The exterior is good with little feeling of use (Murakoshi Yoichi)
Maintenance Information: Unopened
Accessories: instruction manual
The price has been reduced. 2025/2/16 sales price 1,500 yen. CD cleaning solution It is thought to be unused, but the capacity has decreased due to evaporation. The attached cross is yellowed (Hiura Katsuji)
Accessories: MICRO CD FIBER cloth, instruction manual, original box
Audio-Technica arm roller + brush cleaner The height is adjustable, which is convenient. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/10/13 sales price 20,000 yen Arm base that can be used with PD-171AL. The arm can mount an Ortofon AS-212D AS-212S. Heavy arm base made of 20 mm thick brass with a chrome-plated spin finish. If you're thinking about replacing an arm, don't miss it! There are no noticeable scratches on the exterior (Yamato Yuki)
Accessories: original box instruction manual wrench screw
Main specifications: brass, chrome plated, spin finish, diameter 105 x height 20 mm, weight: 1,105 g