Good condition with original box! OTG cable compatible with portable devices equipped with Lightning terminals. Can be used with products equipped with USB Type-C. By using a mesh sheath that is resistant to compression and twisting, and aluminum alloy is used for the plug, faster and more stable transmission is achieved. (FUJISAWA KOSHI)
Maintenance information: 2024.2.6 continuity confirmed
Accessories: original box
Main specifications: Lightning-USB TypeC total length 138mm cable length 80mm (excluding plug)
This is only the top plate part of the company's GT-9721. There are scratches, stains, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W1165 x H45 x D580 mm
Noise stopper for XLR (balanced) output terminals. It not only prevents broadband noise from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
XLR noise stopper cap It is for XLR input terminals, and not only prevents broadband noise intrusion from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
※Inexpensive because it is in poor condition. A rare SD-45 under the name ULTRACRAFT. It has the same configuration as the same Audiocraft model. As is on the LP, it can also be used as a doughnut board if you turn it over and use it together with the adapter. There is red paint on the logo, paint has fallen all over, and there is a lot of dullness (Murakoshi Yoichi)
Accessories: 45 rotation adapter
Main specifications: brass material, self-weight 500g
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book
Record stabilizer from unknown manufacturer. It has a gold-plated finish, and the design looks great. There is a slight feeling of use such as a thread (Yamato Yuki)
Main specifications: diameter 80 mm, height 30 mm, dead weight 289 g (both measured)
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/28 sales price 6,000 yen This is a subweight (small) common to the AC-3000/AC-4000 Craft Arm. A rare item that is hard to obtain now. Recommended for those who didn't have it or those who lost it (Oikawa Tetsuji)
Accessories: none
Main specifications: actual measurement 12g
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
The price has been reduced! 2024/4/12 sales price 3,000 yen ※Since operation has not been checked, it is currently on sale. A power distribution system composed of PD2 power distributors and DC cords. If you are looking for one, please take this opportunity. Velcro is attached to the bottom. Serial 095PD2069 (Tomonori Asaine)
Maintenance Information: 2024.4.12 Operation Unchecked
Accessories: instruction manual, AC adapter, DC cord
Main specifications: size 160 mm 35 mm 110 mm
The price has been reduced. 2020/4/17 Selling price 5,000 yen Unspecified wooden front baffle. If you are a self-made group, come on. There are scratches and stains scattered, uneven painting, corner chips, etc. (Takasaki Atsushi)
Accessories: none
Main specifications: opening diameter 280 mm bass reflex opening W292 × H80 mm W400 × H610 × D20 mm 1.8 kg/sheet
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Accessories: none
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
Disposal prices have been reduced. Member discounts are not applicable. 2022/7/10 sales price 4,000 yen. BOSE 301MM Ceiling Mount Bracket I checked the installation, but the specifications seem to be slightly different from the original (Murakoshi Yoichi)
Accessories: mounting screws
Main specifications: Mounting bracket, inner size, 234 x 150 mm, mounting screw position (diagonal), 80 x 80 mm, external dimensions 243 x 350 x 150 mm, 1.35 mm
Technica's D-terminal selector. Devices with 4 D terminals can be switched with one touch with a select switch*Can be used as 4 inputs/1 output system, or 1 input/4 output systems, but there is no distribution output (simultaneous output) function (simultaneous output) function (Oikawa Tetsuji)
Accessories: none
Main specifications: W240 x H53 x D182 mm 750 g
A ceiling hanging bracket that can be used with BOSE's 100 series, etc. Comes with a safety wire to prevent falling. The installation surface can be rotated 360°, and it has one joint. There is a slight feeling of use such as dullness (Mizushima Itsuro)
Accessories: none
Main specifications: W100 x H170 (straight out) x D100 mm Speaker mounting part W85 x D40 mm (main body mounting screw pitch 60 mm)
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
Micro stroboscope It comes with an overhang gauge, so it's convenient to have one. There are small scratches and dents on the exterior (Yonejima Satoshi)
Accessories: No accessories
The price has been reduced! 2024/4/11 selling price 5,000 yen unspecified armrest and base set. It is similar to the micro RX-1. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: armrest size W15m x H75mm base hole inner diameter 17mm length 120mm (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been reduced! 2024/4/13 sales price 5,000 yen LINN remote control. Details are unknown, but it is similar to EXOTIK and UNIDISK 1.1 remote controls. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.13 operation confirmed (infrared checked)
Accessories: none
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The price has been reduced. 2023/2/10 sales price 5,000 yen. This pan lock is used when storing an amplifier in a wooden case. There are 2 10-inch and 12-inch bracket positions, and amplifiers of 2 different sizes can be attached. The models that can be used are not known here, so please carefully check the target products to be used before purchasing. There is a feeling of use and scratches on the exterior (Hiura Katsutsugu)
Accessories: none
Main specifications: W30 x H110 x D330 mm Weight approx. 400 g
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
The price has been drastically reduced. 2024/3/1 sales price 6,000 yen. 1 sheet only. B&W 802 DIAMOND saran net The condition is generally good. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Accessories: none
It is set directly into the shell to achieve a pattern where records are cleaned at the same time as playing them. There is a feeling of use (Hitoshi Kobayashi)
Accessories: original box, instruction manual
Main specifications: http://www.ebay.com/itm/Vintage-Discwasher-DiscTraker-PRINT-AD-from-1977-/161709875921
RCA output terminal cap Due to its completely non-magnetic structure, when inserted into the RCA output terminal, it exhibits a high damping effect, and further improves sound image localization and signal-to-noise ratio. (FUJISAWA KOSHI)
Accessories: quartz resonator QR-8
The price has been reduced. 2021/5/6 sales price 7,000 yen turntable seat for Garrard 301. The condition is not very good, such as slight undulations and wrinkles. (KONDO HIROTSUGU)
Accessories: original case
Audiocraft brass disc stabilizer. Stable playback is possible with a tight weight. Comes with a stroboscope for convenience. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: diameter 79 mm x height 20 mm weight 730 g
The price has been reduced. 2018/3/3 selling price 10,000 yen Technics ring for fixing horns. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: Inner circumference diameter 95mm (actual measurement)
※Inexpensive because it smells like tobacco and is in poor condition. PSE certified product. A popular 6-prong power strip. The metal case has excellent rigidity and shielding, and Belden OFHC material is used for internal wiring. This best-selling model is popular for its thick sound image and ease of use. There is a strong feeling of use on the exterior, dirt, paint peeling, rust, etc. on the entire exterior (Murakoshi Yoichi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Main specifications: 3P type x 2, 2P type x 4 ports, cable length 2 m
This is a collet chuck stabilizer. Since it is a type where the center spindle is tightened when the center push button is pressed, it can be fixed more reliably. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: 59 mm in diameter x 34 mm in height, weight 164 g