Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
A large self-made audio board with a sturdy wooden board sandwiched between a floor mat and felt. It was created by the previous owner for TANNOY Westminster. As for the exterior, there is a feeling of use such as scratches on the bottom (Tamai Jun)
Accessories: none
Main specifications: size W1040 x D700 x H23 mm weight 8.0 kg
The price has been reduced. 2024/11/8 sales price 3,000 yen. Unspecified audio accessory. The impression is that when connected between CD amplifiers, the resolution has increased slightly and sharpness has increased. I was able to feel the effect of a noise filter. The shield has peeled off at the root of the wiring, and there is a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.11.1 sound output confirmed
Accessories: none
Main specifications: dead weight 17g
Unspecified speaker stand. The wood grain has a natural feel. There is a feeling of use such as peeling veneer (Daiki Goto)
Accessories: none
Main specifications: W32 x 120H x D235 mm, weight 1.9 kg (actual measurement)
Unspecified speaker stand. The struts are filled with sand, which can be expected to have a damping effect. There is a noticeable scratch on the pillar (Daiki Goto)
Accessories: none
Main specifications: W255 x H470 x D305 mm top plate 180 x 205 mm weight 8.1 kg (actual measurement)
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi)
Accessories: screws
The price has been reduced. 2020/4/17 Selling price 5,000 yen Unspecified wooden front baffle. If you are a self-made group, come on. There are scratches and stains scattered, uneven painting, corner chips, etc. (Takasaki Atsushi)
Accessories: none
Main specifications: opening diameter 280 mm bass reflex opening W292 × H80 mm W400 × H610 × D20 mm 1.8 kg/sheet
Acoliba power strip. Uses PSE standard unplated audio grade outlets and audio grade rhodium plated inlets. Sound turbidity is eliminated, and good granularity and a sense of strength can be obtained. There is a slight feeling of use on the exterior, such as scratches and threads (Mizusaki Ryo)
Maintenance information: 2025.5.7 continuity confirmed
Accessories: none
Main specifications: aluminum alloy housing, 4 openings, W129 x D150 x H35 mm
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
2-row 6-piece outlet plate with corrosion-resistant aluminum alloy+full coated new metal. There is no problem with the appearance (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm
2-row 6-piece outlet plate made of corrosion-resistant aluminum alloy+fully coated new metal There is a feeling of use such as small scratches (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 x H116 x D6.5 mm weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
Disposal prices have been reduced! (Member discounts are not applicable) 2022/10/9 sales price 2,000 yen Audio Pro speaker Bravo ALLROOM SAT bracket. This is a wall mounting accessory. The exterior is generally good (Takahashi Nobuyuki)
Accessories: instruction manual copy source box
Main specifications: 52g per weight
Disposal prices have been reduced! (Member discounts are not applicable) 2022/10/9 sales price 2,000 yen Audio Pro speaker Bravo ALLROOM SAT bracket. This is a wall mounting accessory. The exterior is generally good (Takahashi Nobuyuki)
Accessories: instruction manual original box
Main specifications: 52g per weight
This is a bracket for the Infinitesimal 4 of the company's speaker system. There are no noticeable scratches on the exterior. (TAMURA Eiji)
Accessories: original box
The price has been reduced. 2021/5/6 sales price 7,000 yen turntable seat for Garrard 301. The condition is not very good, such as slight undulations and wrinkles. (KONDO HIROTSUGU)
Accessories: original case
Disposal price reduction. 2012/4/2 sales price 10,000 yen Self-made arm board for TD-124 There is an arm hole for the SME3012R The hole is angled in consideration of the escape path of the arm cable W150 x H12 x D400 mm (actual measurement) (Kojima Yosuke)
Accessories: no accessories
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Arm base for TD-124. The previous owner had an orthophone SMG-212 installed. It is scraped around the hole, and there is a lot of feeling of use throughout (Murakoshi Yoichi)
Accessories: none
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm