This is a wooden board from an unknown manufacturer. The construction itself is solid, and it is recommended as a base for speakers, etc. The exterior has dirt, stain marks, spike marks, and line scratches.
Accessories: none
Main specifications: W580×H40×D465mm
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
Disposal price reduction. 2023/8/13 Wood cabinet with an unknown selling price of 10,000 yen. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm, weight 1.8 kg (actual measurement)
The price has been reduced. 2025/4/29 sales price 28,000 yen. Heavyweight, sturdy speaker stand. It is equipped with a damper used in TAOC stands, but the manufacturer and model number are unknown. There is a spike at the foot, but the spike holder is not included. If you're looking for this size, take this opportunity. Exterior, paint peeling, rust, dullness, scuffs, etc. can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W172 x D284 mm (actual measurement) main body W290 x H595 x D400 mm 40 kg (actual measurement)
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
*One jumper plate is missing. 1 pair of unspecified speaker terminals If you've been looking for one, please take this opportunity. Exterior, other than those described above, is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W137 x H81 x D105 mm 112 g (actual measurement)
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
This is only the horn part for the JBL tweeter 075. How about for a replacement, etc. The exterior has stains, stains and dullness (Tamura Eiji)
Accessories: No accessories
The price has been reduced. 2024/6/20 sales price 5,000 yen. Unspecified weight for 3012R. I was able to attach it to the 3012R shaft, but detailed uses are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 86g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 6,000 yen. 1 sheet only. B&W 802 DIAMOND saran net The condition is generally good. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Accessories: none
The price has been reduced. 2025/5/7 sales price 16,000 yen. Power cable 2.0m eyeglass type connector model that realized a PC-Triplec conductor at a low price (Murakoshi Yoichi)
Maintenance information: 2025.5.4 continuity confirmed
Accessories: none
A classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. (FUJISAWA KOSHI)
Maintenance information: 2025.5.13 continuity confirmed
Accessories: No accessories
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
DENON ceiling/wall hanging speaker bracket The speakers are fixed with 2 M5 screws. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: instruction manual
Main specifications: Mountable load up to 5 kg, dimensions between speaker mounting screws (M5) 60 mm, W100 x H146 x D100 mm, 440 g
Denon speaker stand It is a stand that matches the size of medium-sized speakers made in Japan of yesteryear and the DS-66, etc. that are one size smaller. There are bumps, abrasions, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W370 x D290 x H240 mm 5.1 kg
Audio-Technica arm roller + brush cleaner The height is adjustable, which is convenient. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Audio-Technica Shell Keeper, commonly known as Tri-Capsule. 3 can be stored with the headshell attached (Mizushima Itsuro)
Accessories: original box
Main specifications: W152 x H88 x D50 mm 120 g
This is a wet cleaner for cords. A wide type that can wipe down the surface of an LP record. In addition to the appearance and yellowing, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none