Special stand for Sonas Fabers. Italian walnut wood is assembled, and marble, a specialty of the Tuscan region, is used as a base, and you can feel the beauty of handicraft as well as a sense of stability (Daiki Goto)
Accessories: none
Main specifications: Height 600 mm Top plate: W170 x D200 mm Bottom plate: W320 x D320 mm 15 kg/bottle
A rare item! Audiocraft bi-amp adapter. It distributes 1 input system to 3 systems. Recommended for multi-faceted people. It is also equipped with a phase selector (Oikawa Tetsuji)
Accessories: none
Main specifications: W312 x H80 x D120 mm (actual measurement)
Technica headphone stand Hard and sturdy beech wood is used for the top wood and base wood. This headphone stand pursues interior design and ease of use. There is a small wound (Oikawa Tetsuji)
J1 project isolation board (small size). pair. This board is perfect for standing tall boy speakers on the floor, between small bookshelf speaker stands and speakers, and underneath small components. There are a lot of line wounds (Oikawa Tetsuji)
Main specifications: 250 x 300 x 20 mm
Set of 4 Supra banana plugs Since it can also be connected, it can be used for various purposes, such as installing a super tweeter. 24K plating Overall there is dullness (Oikawa Tetsuji)
Accessories: none
※One felt foot is missing, so one side is tilted. There are a lot of scratches. When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced (Oikawa Tetsuji)
Accessories: none
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
A custom-made line selector manufactured by A.Y. Electronics/L Sound. It is possible to switch between 3 channels.
There is dullness and dirt. (FUJISAWA KOSHI)
Maintenance information: 2024.3.28 continuity confirmed
Main specifications: W160 x H81 x D133 mm
This item converts unbalanced input to balanced output. It has a loop through function. The exterior has scratches and paint bald spots (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: instruction manual
Main specifications: 4 unbalanced inputs, 4 balanced outputs, W210 x H44 x D230 mm, 2.3 kg
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
※There is no problem with the operation, but since there is no manufacturer, it will be handed over as is. CSE isolation regulator. It is recommended for those who live in the Kanto area and have a 60Hz player or the like. The exterior has some dullness and scratches. Serial 710716 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main Specifications: Isolation Regulator Input Voltage 90-110V Rated Output Voltage 100V Rated Output Power 30W W214 x H85 x D163 mm 4 kg
Sony's RCA. This is a cable connection plug. If you've been looking for one, please take this opportunity. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Accoliba RCA short pins, set of 8 A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. There is no guarantee even if the sound stops coming out or if it breaks down by any chance (Oikawa Tetsuji)
Accessories: none
Set of 4 Y lugs Oyaide's screw-fastening Y lug terminals are made in Japan with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There is little feeling of use (Oikawa Tetsuji)
Accessories: original box, wrench
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
Air bow stabilizer. Can be used with all AIRBOW belt drive CD transporter players and CEC TL3, TL3N, TL5100, TL51 Series, etc. (Tamura Eiji)
Accessories: original box, manual
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product There is dirt on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
A very rare Lux noise cutting transformer. It cuts harmful noise from the power supply and enables high-quality music playback. What is the exterior. There are threads and dullness. Serial 21030124 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: instruction manual
Main specifications: W231 x H137 x H207 mm 6.9 kg
A balance line selector that is easy to use. It is 3 input systems/1 output system. The LR input/output terminals are arranged symmetrically, the LR internal wiring is also divided into left and right, and mutual interference between LRs is reduced by using a separate L/R structure. There are fine scratches and paint peeling on the exterior. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: W250 x H64 x D117 mm 2.3 kg
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
Details unknown. Corian board of the same size as the AIR BOW DCB44412 The size seems to be just right for amplifiers, CD players, etc. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W490 x H12 x D440 mm 4.6 kg (actual measurement)
Details unknown. Corian board of the same size as the AIR BOW DCB44412 The size seems to be just right for amplifiers, CD players, etc. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W490 x H12 x D440 mm 4.6 kg (actual measurement)
This is an arm base for THORENS TD124 with unknown details. OrtoFon's RMA309 was mounted. There is a feeling of use due to appearance, dullness, mounting scratches, etc. (Kobayashi Hitoshi)
SOUND BOX DOUBLE ARM CABINET FOR GARRARD301 A must-see for 301 users! Starting with the arm base for SME, Ortofon, etc., a spare base is also attached, so you can mount an arm of your choice. If you've been looking for one, please take this opportunity! The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Accessories: arm base
Main specifications: W560 x H100 x D467 mm 6.5 kg (actual measurement)
Set of 2 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has a feeling of use such as being dull or torn in felt (Tomoho Asaine)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
※Inexpensive due to dullness, scratches, etc. Taok cast iron speaker stand This is a standard stand that tightens the bass and constructs an accurate sound image (Oikawa Tetsuji)
Accessories: spike, spike receiver
Main specifications: top plate W200×D240mm bottom plate W250×D300mm height 600mm 14kg
HDMI switcher with 4 inputs and 2 outputs. The video and sound of an HDMI device can be switched and output to 2 monitors, projectors, etc. It is equipped with 3 audio outputs: a 3.5 mm stereo mini jack, coaxial digital, and optical digital terminals. There are small scratches etc. on the exterior (Tamai Jun)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: instruction manual, original box, AC adapter
Main specifications: size W190 x D97 x H25 dead weight 416 g
Speaker selector that can be switched by operating a remote control. It is a 3-system switchable type using a large speaker relay, and can also be switched with the main unit button. As for the exterior, the rubber feet on the bottom are misaligned (Hiura Katsuji)
Maintenance information: 2024.3.24 continuity confirmed
Accessories: remote control power cable
Main specifications: 3-system switching W297 x H79 x D137 mm 1.8 kg
The price has been reduced! 2024/3/24 sales price 500 yen Set of 3 spike insulators with unknown details. There is a feeling of use on the exterior, such as dullness or peeling of the plating (Tomoho Asaine)
Accessories: none
Main specifications: size 36φweight 50g (actual measurement)
This is a dedicated audio board to maximize the sound quality of SOUL NOTE A-0, A-1, A-2, E-1, E-2, D-1, and C-1. A depression is created by determining the position of the spike. Spike reception prevents damage to the installation surface, and can be installed up and down (Daiki Goto)
Accessories: manual, spike holder, setting guide
Main specifications: material/birch wood W460 x H20 x D440 mm 2.7 kg
A manual record cleaner made in Germany, a lightweight and easy to use cleaner. The cleaning solution dedicated to cleaning LP/10 inch/EP panels (SP panels are not allowed) can be filtered and used repeatedly. ※The cleaning solution is about 40% (Asae Tomo method)
Accessories: original box
The small B&W speaker stand is just the right size for the company's 600 series and is sturdy. The exterior has an overall feeling of use and stains (Ryo Mizusaki)
Accessories: instruction manual, spikes
Main specifications: top plate W180×D200mm bottom plate W240×D300mm H610mm weight 9.1 kg/1 bottle
The disposal price has been reduced. Member discounts are not applicable. 2024/3/22 sales price 25,000 yen. A boost transformer using the “Columbia Low Frequency Transformer 834-003” at the heart of the DENON AU-320. Although it is self-made, it is equipped with 2 input systems and a PASS function (Murakoshi Yoichi)
Maintenance information: 2024.3.21 sound output confirmed
Accessories: none
Main specifications: 40 ohms, pass switching cable length 1.15 m, main unit W80 x H50 x D150 mm
Technics audio case. The sturdy steel box and plastic logo tray can hold 16 cassettes or 7 headshells. The commitment typical of Technics is irresistible. Slightly dull (Murakoshi Yoichi)
Accessories: none
Main specifications: W84 x H140 x D371 mm 1.3 kg
The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
Set of 3 metal spike bases Details are unknown, but it is an affordable and easy to use type. There is a feeling of use on the exterior such as scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size 35φ×H7mm, weight 32g (actual measurement)
The price has been reduced! 2024/3/22 sales price 200 yen ※PSE standard product! This is a standard type of wall outlet. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.22 continuity confirmed
Accessories: none
Banana plug with negative ion coating. It seems that improvements in sound quality can be expected. The condition is dullness over time and small scars. (Yamato Yuki)
※Only one is a pillar of the company's “CL Series” and “XL Series” racks. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: pole length 200mm
Set of 2 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Ryo Mizusaki)
Accessories: No accessories
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
※It is inexpensive because it is in poor condition, such as rust. Set of 4 high-carbon cast iron stands with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has rust spots, dirt, etc. (Tamura Eiji)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
A speaker stand with a firm and stable feel. The size is just right for medium speakers such as the NS-1000M. By changing the direction of the middle plate, the width can be changed from about 320 mm to 360 mm. The exterior has dirt and some carpet on it (Tamura Eiji)
Accessories: none
Main specifications: Speaker stand W350 x D300 x H247 mm approx. 6 kg/book
The price has been reduced! 2024/3/20 sales price 2,000 yen, set of 8 wooden blocks Details are unknown. Can be used as an insulator for small speakers (Hiroki Aso)
Accessories: none
Main specifications: W42 x H42 x D42 mm 54 g (actual measurement)
PSE standard product UL compliant FURUTECH inlet plug is a non-magnetic material design using gold-plated copper screws and stainless steel parts (Tamura Eiji)
Accessories: No accessories
The core model of the high-grade power plug “PC Series”. All PSE standard parts are completely non-magnetic. Due to the characteristics of silver+rhodium plating, it is a product with high resolution, high response, wide range, and you can feel good stretch in the high frequency range. There is a feeling of use and scratches on the blade (Tamura Eiji)
Accessories: No accessories
The price has been reduced! 2024/3/18 sales price 7,000 yen set of 4. This is a silver type with a 180mm pole (19mm diameter) quadraspire option. Please use it as an additional pole for Q4, Q4D, etc. There are paint peeling and small scratches on the exterior (Takahashi Nobuyuki)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Yonejima Satoshi)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
Hamilex speaker stand Dark brown with a high texture. Uses a PVC sheet with excellent durability. It is recommended for those who listen to it on the sofa at a slightly lower level. There are slight scratches and creases (Murakoshi Yoichi)
Accessories: none
Main specifications: total load capacity 20 kg, top plate 190 x 230 mm, W230 x H450 x D 295 mm, approx. 3 kg
Set of 4 A wood block speaker stand made of laminated chipboard. There are scratches and broken veneers (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H190×D390mm 5.2 kg/bottle