Disposal prices have been reduced. Member discounts are not applicable. 2021/4/10 sales price 2,000 yen. Remote cable 2.0m A remote cable that can synchronize the power switch between the company's control amplifier 035 and the power amplifier 036. It is connected from DC-OUT of 035 to DC-IN of 036 and works in conjunction with 035 operation. (Kondo Hirotsugu)
Maintenance information: 2021.4.4 Linkage confirmed by the company 035 and 036
Accessories: none
※Only 1 is an unopened item, the line cable is 5.0 m unopened and has not been checked, but this is the current situation (Kobayashi Hitoshi)
Accessories: original bag
※The continuity of the 5.0 m line cable has been confirmed for only 1 line cable. The exterior is beautiful with little feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.20 Confirmation Confirmed
Accessories: none
Parallel cable 1.4 m pair end RCA plug cable that distributes 2 RCA L and R If you've been looking for one, go ahead. In addition to the exterior and writing on the plug, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 6,500 yen. Internal Wiring Cable 2.0m Alpha Internal Wiring Cable It is a single-ply and popular black enamel (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Disposal prices have been reduced. Member discounts are not applicable. 2022/5/23 sales price 300 yen. ※Only 1 speaker cable uses oxygen-free copper (OFC) as the unprocessed conductor at the 0.5m end. The sound quality is relatively flat, so you can easily feel that the sound quality is a notch higher (Kanai Hidetsugu)
Maintenance information: 2022.5.22 Conductivity confirmed
Accessories: none
※Only 1 speaker cable, 0.9 m, has an orthodox cab tire structure, and reproduces sound quality that is thicker than the price. There is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.22 Confirmation confirmed
Accessories: none
XLR5pin/XLR3pin x 2 conversion cable 0.3 m NC5MXX-B/NC3FXX-B x 2 cable part: BELDEN 1172A There is an abrasion on the sheath (Kojima Yosuke)
Accessories: none
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
※The plug on one side has changed. XLR cable, 1.0 m pair, stress-free 6N conductor, has a narrower range than Acrolink models, so it makes a thick sound. Recommended for domestic systems from the 90s and earlier. The color is fading (Oikawa Tetsuji)
※The plug has changed to WBT. RCA cable, 1.0 m pair, stress-free 6N conductor, has a narrower range than Acrolink models, so it makes a thick sound. Recommended for domestic systems from the 90s and up, the color has faded (Tetsuji Oikawa)
※The plug on one side has changed. XLR cable, 3.0 m pair, stress-free 6N conductor, has a narrower range than Acrolink models, so it makes a thick sound. Recommended for domestic systems from the 90s and earlier. The color is fading (Oikawa Tetsuji)
1.8 m PSE standard power cable, 4 types of hybrid original conductor+3-core structure, this is a long-selling cable that reproduces a sense of expanding sound field, medium to high range with good coverage, and a wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: original box
Speaker cable 0.7 m pair with unprocessed 6N stress-free cable and electromagnetic wave absorption non-magnetic thread. This cable has a natural, smooth sound quality with a wide range, and does not choose a genre (Ryo Mizusaki)
Accessories: none
The 0.8 m pair end of the speaker cable uses a new polymer polyolefin material with an excellent low dielectric constant of about 1/4 compared to untreated PVC. Using a cab tire structure, you can hear a neutral sound that is strong against disturbance noise and has a sense of stability. There is rubbing dirt on the sheath (Kojima Yosuke)
Accessories: none
Only one speaker cable, 1.8 m, untreated 6N copper at the end, is stress-free, and has straightforward sound quality. Although it is a thick cable, it is flexible and easy to handle (Daiki Goto)
Maintenance information: 2024.3.4 confirmed
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable uses 0.9 m pair Y lug end - untreated 7N copper Excellent separation and an overwhelmingly high S/N ratio. The simplicity of the sound, the good localization, the texture of the strings, and the texture of the voice are amazing. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable uses 0.9 m pair Y lug end - untreated 7N copper Excellent separation and an overwhelmingly high S/N ratio. The simplicity of the sound, the good localization, the texture of the strings, and the texture of the voice are amazing. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
※Only 1 interconnect cable, 0.4 m, line cable with a three-core structure without terminals. There are appearance, feeling of use, small scratches, rubbing on the sheath, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.9 continuity confirmed
Accessories: none
RCA cable 0.5m pair REAN (Neutrik) RCA plug This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range (Fujisawa Yukishi)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: No accessories
RCA cable 0.5m pair REAN (Neutrik) RCA plug This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range (Fujisawa Yukishi)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: No accessories
Balance cable 0.5 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Balance cable 0.6 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Balance cable 0.6 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Balance cable 0.7 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound yet has a firm thickness in the mid to low range. The printing on the sheath has disappeared (Kojima Yosuke)
Accessories: none
Balance cable 3.9 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range. The printing on the sheath has disappeared and there are seal marks on the plug shell (Kojima Yosuke)
Accessories: none
* No. 3 hot specification RCA-XLR conversion cable, 3.9 m pair, both end plugs are a standard BELDEN line cable that clearly shows the outline of Neutrik's sound yet has a firm thickness, especially in the mid to low range. The sheath printing disappears a lot (Kojima Yosuke)
Accessories: none
Balance cable 3.9 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range. The printing on the sheath has disappeared and there are seal marks on the plug shell (Kojima Yosuke)
Accessories: none
Balance cable 4.0m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range. There is dullness around the plug (Kojima Yosuke)
Accessories: none
Balance cable 4.9 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range. The sheath printing disappears a lot (Kojima Yosuke)
Accessories: none
※Only 1 balance cable, 4.9m, is a standard BELDEN line cable with a firm outline of the Neutrik plug sound while having a firm thickness in the mid to low range. The printing on the sheath part has disappeared and there are seal marks on the plug shell (Kojima Yosuke)
Accessories: none
※Only 1 balance cable is 4.9m. This is a standard BELDEN line cable with a firm outline of the Neutrik plug sound while also having a firm thickness in the mid to low range. The printing on the sheath part often disappears (Kojima Yosuke)
Accessories: none
※Only 1 balance cable is 9.9m. This is a standard BELDEN line cable with a firm outline of the Neutrik plug sound, yet has a particularly firm thickness in the mid to low range. The printing on the sheath part has disappeared (Kojima Yosuke)
Accessories: none
Speaker cable 1.1 m pair terminal The company's highest-grade cable using 4 types of 8N wires with different unprocessed wire diameters. As it looks, the center of gravity is low, and it is very stable. Definitely for those who want to enjoy the majestic sound! There is a scuff stain on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
※1 bottle only. Speaker cable 2.0m is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and features a tight sound (Murakoshi Yoichi)
Maintenance information: 2024.3.29 continuity confirmed
Accessories: none
Balance cable 1.5m pair accuphase OFC series cable is the company's standard cable with thick gold plating and excellent corrosion resistance. The appeal is that it suppresses color dramatization inherent in cables and does not impair the individuality of amplifiers and players. There is dullness around the plug, and there is rubbing and dirt on some sheaths (Kojima Yosuke)
Accessories: none
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none