TOWER RECORDS turntable mat set of 3 Usually it comes in a set of 2. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: original bag
A pair of 2 corian boards with unknown details seems to be just the right size for small speakers, etc. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: W180 x H7 x D270 mm 0.6 kg (actual measurement)
The exterior of the woofer mounting clamp, which seems to be a self-made set of 5, has variations in the cutting part, there are corrosion and mounting marks all over, and there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part, claw depth approx. 12 mm, 27 x 24 x 18 mm
A quad bookshelf type speaker with a mirror finish that exudes a sense of luxury. It has wide bandwidth and cuts while retaining shadows unique to European speakers, and plays jazz and rock with rich musicality. The exterior has a feeling of use over time, such as dullness and scratches. ※This is a general-purpose jumper cable (Hiroki Aso)
Maintenance information: 2024.4.22 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way rear W bass reflex bookshelf type 6Ω 86db frequency characteristics 45 to 43 kHz W190 x H330 x D265 mm 6.0 kg
The price has been drastically reduced! 2024/4/20 sales price 198,000 yen ※It is cheap because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
※1 bottle only. Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance with various woofers and tweeters (Daiki Goto)
Maintenance information: 2024.4.23 Maintained (diaphragm installation adjustment, replacement of the following parts. DCR (54871, 5.7 ohm diaphragm, no scratches)
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The paint is peeling off. Serial 32769, 32799 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 maintained (diaphragm installation adjustment, pad dampener replacement)
Accessories: No accessories
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
Black, the highest peak in the 2M series, is now in stock. The stylus tip is equipped with the same high-grade solid diamond shibata needle as the famous MC Jubilee. Pure silver-plated high-purity copper wire is used for the power generation coil. The amount of information on 2M's highest peak is truly one word (Hiura Katsuji)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: original instruction manual box
Main specifications: output voltage 5 mV frequency characteristics 20 to 31,000 Hz internal resistance 47 ohms suitable needle pressure 1.5 g dead weight 7.2 g
Pair tube direct heat triode tube, white base, made in Slovakia, measured value 76/70 (rejected value 58) with original box*Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single sale direct heat triode tube, made in Russia, white base, measured value 78 (rejected value 58) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced. 2024/4/19 sales price 698,000 yen Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley is 60 Hz, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning. Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
The price has been drastically reduced. 2024/4/19 sales price 178,000 yen Maintained. A rare Fisher tube control amplifier. The 2 phono inputs are attractive. The high range is decent, but the round, rich, and powerful mid-range is unique to FISHER. The sound is light, bright and friendly. *Only CHANNEL A is valid for EQUALIZATION LP and 78 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (re-strengthening treatment for all selector knobs (*Please do not remove them as much as possible.) Volume disassembly grease up treatment for BASS, main volume disassembly, cleaning and repair (due to the structure, there are some gang errors and sound leaks when narrowed down to a minimum. (If you are concerned, only RIAA 1 and AUX1 can be adjusted with LEVEL SET on the top surface.) Electrolytic capacitor 1000 μF replacement, vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2021.5.15 maintained (repair of poor contact with each part selector, etc., correction of lever deformation points, replacement of block capacitors 30/30/10/10 μF defects, vacuum tube sockets and RCA jack caulk repairs ※ Since the main volume is a special type with a loudness terminal, some gang errors will occur after 12:00. AUX1 and PHONO can be fine-tuned with the LEVEL SET on the top. *Other operation checks have been made (4 vacuum tube shield cases are missing)
Accessories: Service Manual (English)
Main specifications: Vacuum tube 12AX7, 12AT7, 6V4 using PHONO2 system Dimensions W390 x H120 x D210 mm 6.6 kg
The price has been drastically reduced. 2024/4/20 sales price 848,000 yen Exterior cleaning and repair completed! This is JBL's standard monitor series. Compared to the 4343 and 4344 up until now, you can enjoy modern JBL sound that is more delicate, has a sense of balance between each band, and has good grain. Fine nuances are coming out in the vocals. There is a repair mark on the top plate (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 maintenance (exterior cleaning, repair, saran net turning and bonding, 9V battery replacement)
Accessories: instruction manual, saran net, jumper
Main specifications: 4 way 4 speakers, impedance 6 ohms, output sound pressure level 95 dB, W597 x H1080 x D400 mm, 90 kg/1
Maintained! A famous machine 44 with an easy-to-handle RCA terminal added to the rear terminal of the Quad control amplifier. The British QUAD's small preamp is a perfect balance between the freshness and richness of character. You can enjoy a calm, high-quality sound when paired with the same speakers made in England (Murakoshi Yoichi)
Maintenance information: 2024.4.18 maintenance (internal all checks, power supply filter C ± B bypass C replacement, balance VOL cut off sound → cleaning, check each board)
Accessories: 2 DIN input cords, power cord, instruction manual (copy)
Main specifications: 2 LINE inputs, 2 TAPE2 systems (DIN input or more), 1 PHONO input system, Phono sensitivity 1m/3m/10mV switching W321 x H103 x D203 mm 4 kg
Maintained! The rear terminal of the Quad control amplifier has also been changed to RCA specifications to make it easier to handle, and the famous 44 has been refreshed to deliver goodness to a wide range of people. The British QUAD's small preamp is a perfect balance between the freshness and richness of character. When paired with the same speakers made in England, you can enjoy a calm, high-quality sound. Personally, I recommend the combination with QUAD405. Serial Q36114 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 Maintained (balance VOL cleaning ~ check OK. Check the other boards and re-solder the holes. (C, R check OK)
Accessories: power cord
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The disposal price has been reduced. Member discounts are not applicable. 2022/5/23 sales price 300 yen. *Only one speaker cable uses oxygen-free copper (OFC) as the untreated conductor at the 0.5m end. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Kanai Hidetsugu)
Maintenance information: 2022.5.22 continuity confirmed
Accessories: none
※Only 1 speaker cable, 0.9 m, has an orthodox cab tire structure, and reproduces sound quality that is thicker than the price. There is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.22 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/4/8 sales price 198,000 yen Maintained! Macton tubular OTL stereo power amplifier. Eight 6RA3 triodes are used in parallel per channel to enhance load impedance adaptability, and it also features a structure with Macton's unique balanced NF applied. The sound unique to OTL is thick and has a high sense of energy, and the high driving power is also attractive. The appearance is oxidized and dull. Serial 40704 (Yonejima Satoshi)
Maintenance information: 2024.4.8 Maintained (power transformer primary side rewound repair by PSE inspection. 3 vacuum tube 6RA3 replacements Vacuum tube 6AQ8 replacement. Main volume disassembly cleaning repair. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 100V (rated output 32W, SP:16Ω), please use speakers above 16Ω)
Accessories: No accessories
Main specifications: tubular low-load OTL stereo power amplifier 30W x 30W (8Ω) vacuum tube used: 6RA3 x 10/6RA8 x 2/12AX7 W370 ✕ H160 ✕ D270 mm 12 kg
Pair tube metal brown base Russian dharma tube measured value 60/58 (rejected value 44) with white box, printing on one side often disappears ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube VT-115 equivalent pipe metal tube measurement value 42/40 (rejected value 25) There is slight rust on the tube with white box*Pairs are determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Pair tube ambient heat beam tube made in America, measured value 42/40 (rejection value 25) with original box (the claws on one side of the box are missing) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, ambient heat beam tube, made in America, JAN measurement value 42/40 (rejected value 25) with white box ※Pairs are determined based on GM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube VT-115 equivalent tube, high durability tube, metal tube, tea base, measured value 48/46 (rejected value 25) with white box ※Pairs are determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Pair tube VT-115 equivalent tube, high durability tube, metal tube, tea base, measured value 46/44 (rejected value 25) with white box ※Pairs are determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Balance cable, 4.5 m pair, uses technology introduced in the 7N-A2070, and uses a thick rhodium plated plug that uses a stress-free 6N copper conductor. It has a thick, relaxed sound. The sheath is sticky, and there are bumps around the plug (Kojima Yosuke)
Accessories: none
※There is a tear at the base of the plug, so it's cheap! XLR cable 1.0m pair 7N/8N high purity hybrid conductor construction. It is a model that pursues sound quality that is neither 7N nor 8N. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: none
The 1.5m power cable has a high attenuation rate of weak vibrations, and the sense of distortion is minimal due to the high rigidity, so the impression is that the sound quality is precise and accurate. Try it with a sound source with a large number of instruments, such as classical symphonies. In addition to the exterior and a lot of friction, you can also see a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed
Accessories: none
Main specifications: blade beryllium copper (mirror polish) plating, thick silver plating (1.5 μm) + rhodium plating (0.3 μm) finish, chassis, high rigidity PBT (with 30% glass fiber), cover, high rigidity polycarbonate, completely non-magnetic, 125V/15A specification, PSE certified
The price has been drastically reduced! 2024/4/14 sales price 69,800 yen ※The power lamp on one side is slightly dark, but it is currently sold. GENELEC monitor speaker with built-in amplifier. The richness of bass that you don't think comes from a 10cm woofer unit has satisfactory characteristics as a near-field speaker. It is a popular model with many enthusiasts. There are scuffs in places. *The input is an XLR terminal only. Serial PM1001438, PM1001984 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: power cord
Main specifications: die-cast aluminum enclosure, bass reflex tweeter, 19mm metal dome woofer, 105 mm cone type, frequency characteristics, 66 Hz to 20 kHz, rated output, 20 W (8 ohms), dimensions W151 x H230 x D142 mm, weight 3.7 kg/1
※Only 1 interconnect cable is a 0.4 m three-core line cable with no terminals. There are exterior, feeling of use, small scratches, scuffs on the sheath, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.9 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/20 sales price 69,800 yen This is the first arrival at the A100BT5.0 Hi-Fi Hall, the top model of the company's A80. The color is red high gloss with a luxurious high-gloss finish. The sound is very loud and has an extruding effect. There are plenty of input/output interfaces, and the wired USB is compatible with optical digital input, analog audio input, subwoofer output, and Bluetooth with aptX, a high-quality sound codec using the Qualcomm Bluetooth v5.0 chipset, making it easy to use. There are no noticeable scratches on the exterior. Serial 496000712560 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, power cord, connection cord
Main specifications: DAC built-in active speaker output 40W x 2 input (digital) USB/Optical/Bluetooth (analog) RCA size W160 x H283 x D255 mm weight 5.5 kg
The price has been reduced! 2023/4/16 sales price 668,000 yen pure A grade stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. Not only is the sense of power and powerful bass, but the contoured, stretchy mid-to-high range is still appealing. There are scratches and scratches on the exterior. Serial F4Y151 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord (general purpose)
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
PSE standard product 4-prong power strip The sound is lively and the music is dynamic. The spread of sound increases, and an image of the sound spreading throughout the room and the body being wrapped in sound comes out. There is a feeling of use on the exterior, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: none
Main specifications: cable part 75 cm, total length approx. 90 cm
This is a set of needle tip cleaning solution and brush. Normally, you can use a dry method with only a brush, and a wet method that uses liquid when the dirt is severe (Hiroki Aso)
Accessories: brush case
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Speaker selector that can be switched by operating a remote control. It is a 3-system switchable type using a large speaker relay, and can also be switched with the main unit button. The exterior is scratched and dull, and there is a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: remote control power cord
Main specifications: 3-system switching W297 x H79 x D137 mm 1.8 kg
Set of 8 Audio-Technica iron blocks. There is more weight than it looks, and the sound seems to be tight when used under an amplifier or small speaker. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: W30 x H30 x D30 mm weight 136 g
The price has been reduced! 2024/4/7 sales price 1,500 yen A high-precision level instrument that is essential for leveling players. It is a long-selling model with an aluminum body (Tomonori Asae)
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
Audio-Technica's lightweight hard shell. It is compatible with cartridges that are sharp and sharp. The connection between the fuselage part and the arm is made of separate parts, making it difficult for extra signals to be transmitted. (TAMURA Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum dead weight 12 g (actual measurement)
Air-tight KT88 push-pull The modern sound, which combines the soft texture unique to vacuum tubes and the high resolution, is attractive. There are 2 inputs at the front and rear, and the front input can be directly connected to the first stage tube without going through a shielded wire. The front panel is equipped with a meter that can check the optimal operating point of the output tube. There are many scratches on the bottom plate, and there are paint chips, threads, and bumps on the transformer (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: used vacuum tube KT88 x 4, ECC83 x 2, 5814A x 2, 12BH7A x 2, 12BH7A x 2, 80W+80W 8Ω, W415 x H223 x D380 mm, 32 kg
Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 maintenance (output relay replacement, power amplifier circuit resistance replacement, power supply circuit capacitor replacement, tape selector, etc., switch disassembly, polishing grease application (input selector, power amplifier direct, source direct, reck-out, tone, loudness, muting switch), various volumes, switch cleaning, solder main part repair, pin jack polishing, interior and exterior inspection, cleaning, operation confirm)
Accessories: copy of instruction manual
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
Maintained! This is a 907 series higher class premain amplifier. Not only is the sound thick and wide range, but it is also a deep and majestic sound with a sense of weight. The XR series during this period has particularly horsepower in the mid to low range, and it sounds briskly ROCK and JAZZ. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 maintenance (main amplifier circuit transistor, adjustment volume exchange, output relay, headphone relay replacement, power supply circuit transistor replacement, input selector, etc., and application of polishing grease (power amplifier direct, source direct, reck-out, tape, loudness, subsonic, muting, processor switch), various volume cleaning, soldering (Repair, DC, bias adjustment, internal inspection and cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Equipped with HYPERα-X balance circuit, effective output 190 w+190 w dimensions W466 x H163 x D452 mm, weight 33 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/28 sales price 6,000 yen This is a subweight (small) common to the AC-3000/AC-4000 Craft Arm. A rare item that is hard to obtain now. Recommended for those who didn't have it or those who lost it (Oikawa Tetsuji)
Accessories: none
Main specifications: actual measurement 12g
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
Maintained! An improved version of the BC-1 standard monitor broadcast by the British BBC, a model that plays British sound in an attractive way. The brilliance and elegant expression of the classical sound source strings and vocal music are workmanship that can be said to be the prototype of the beautiful sound of European models. Serial 6429 6430 (Hiroki Aso)
Maintenance information: 2024.4.2 Maintained (exterior repair/stain coloring
Front Baffle Paint Rear Baffle Cleaning Saran Net Replacement/ Internal Urethane Replace/ Dowel Adjustment Woofer Single Side Edge Reinstall Center Adjustment Super Tweeter Cleaning Terminal Brand New Replacement Unit Detachable)
Accessories: saran net
Main specifications: 3-way bass reflex type 8Ω 50W W305 x H635 x D298 mm 14 kg
※It has a cigarette smell, so it's cheap. A rare Audiocraft RCA to XLR conversion converter has arrived. A useful item for converting an RCA pin cable into a balanced cable. The exterior has paint bald spots, dirt marks, etc. Serial 43217 (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: W200×H75×D300mm 2.7 kg