1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m BNC specification Belden digital cable and video cable for audio. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
PC-Triple C is used as the 1.0 m pair conductor of the RCA cable, and RCA rhodium-plated small terminals are used. It clearly expresses even the smallest details with a clear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 9,800 yen. ※1 bottle only. A coaxial 2-way speaker with unknown details, very similar to Pioneer's PAX series. I was able to check the sound output, but I couldn't open the box. It seems that it can also be used as a center speaker, etc. There are many cracks, creases, and scratches (Murakoshi Yoichi)
Maintenance information: 2023.11.17 sound output confirmed
Accessories: none
Main specifications: W385 x H575 x D365 mm 16.2 kg (actual measurement)
Comes with original box! This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: instruction manual, original box, needle cover, mounting screw, brush
Main specifications: mm type output voltage 5.5 mV frequency characteristics 20 to 25,000 Hz internal resistance 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
Set of 2 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has a feeling of use such as being dull or torn in felt (Tomoho Asaine)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
※It is inexpensive because it is in poor condition, such as rust. Set of 4 high-carbon cast iron stands with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has rust spots, dirt, etc. (Tamura Eiji)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
The price has been drastically reduced! 2024/3/22 sales price 248,000 yen The initial main weight split type has been revived with genuine maintenance by Rizaye! It is a popular model with a full range of cartridges that can be used. In addition to the glossy, smooth tone due to the metal knife edge, it is a famous machine that boasts deep chiseled sound quality. An earth cable is not attached, but it is an original specification that diverts the ground with Rch-. The main weight is a large type
Maintenance information: 2023.5.17 maintenance (main unit disassembly check and cleaning, bed plate grommets x 4 replacement, inspection and adjustment of each part, and operation check)
Accessories: instruction manual (copy), dedicated cable
Main specifications: statically balanced needle pressure 0 to 5 g, cartridge weight 1.5 to 26 g
We've reduced the price! 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. Internal all-check, Lch power stage Tr x 3 large leak DC cut C, gain setting C off → replace. (No AC line fuse, installation, operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Fully maintained in 2016, exterior repairs have been carried out again, and the finish is very beautiful. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Kobayashi Hitoshi)
Maintenance information: 2024.3.16 maintained (exterior repair/cleaning, velcro replacement, saran net repair/frame repair) 2016.4.7 maintained ([exterior] exterior paint, chipped putty repair/bulge part repair, front and rear baffle painting, saran net replacement, woofer coker cone paper coating, unit detachment [2231A] edge replacement [2121] edge replacement [2420] diaphragm Installation adjustment, DCR (44563/5.5 ohm diaphragm no scratch), DCR (43429/5.7 ohm diaphragm no scratch) [network] remove the modified LF wiring. Reinstall and rewire the terminals (external products) and clean them. Replace faulty resistors (both sides). ATT exchange. INT/EXT switch-over SW cleaning Capacitor replacement. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz)
Accessories: saran net diffuser
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Maintained. model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. The exterior has dullness, scratches, etc. Serial 0850701830 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (loading gear and slider gear replaced due to cracked loading belt, cleaning for sticky tray paint, pick-up relay board connector contact cleaning, lens cleaning, inspection of various operations)
Accessories: remote control, instruction manual, power cord, spike, spike holder
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
Genuine Time Road Master clock generator. A rare clock with natural orientation, excellent sound image localization, and excellent reverberation expression. It is a model that specializes in expressiveness rather than performance. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.3.28 power check (operation has not been checked because there is no clock equipment)
Accessories: power cable, instruction manual
Main specifications: clock frequency 32/44.1/48/88.2/96kHz, 6 clock out systems, high-precision crystal oscillator, shipment accuracy 0.1 ppm, W430 × H52 × D390 mm, 6.8 kg
A rare item! Audiocraft bi-amp adapter. It distributes 1 input system to 3 systems. Recommended for multi-faceted people. It is also equipped with a phase selector (Oikawa Tetsuji)
Accessories: none
Main specifications: W312 x H80 x D120 mm (actual measurement)
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
A record player with an excellent sense of stability developed by condensing the high inertia concept realized with the SX-8000 /2 into a compact integrated player. The SME 3010R is mounted to achieve strong, thick, and outstanding analog sound with cuts. The overwhelming performance that brings out the full amount of information on a vinyl record is attractive. The exterior has dullness and small scratches. Serial 09040193 (Yonejima Satoshi)
Maintenance information: 2024.3.23 Maintained (servo board pitch volume center adjustment. Power circuit electrolytic capacitor replacement. Arm weight O-ring replacement. Weight adjustment screw part cleaning. Turntable fixing screw installation rotation, arm operation, voice check)
Accessories: power supply unit, handle, instruction manual, power cord
Main specifications: [AP-M1] belt drive system, 8-pole hysteresis, synchronous motor, CR oscillator, BTL amplifier drive, 33 1/3, 45 rpm switching, ± 4% fine-adjustable size: W463 x H165 x D377 mm weight: 28 kg [3010R] short arm static balance type effective length: 237 mm cartridge mounting weight range: 1.5 to 26 g (cartridge only) 9.5 to 34 g (shell) Including) Variable needle pressure range: 0 to 5 g Slide base: ± 12.7 mm
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/3/24 sales price 698,000 yen This is AVALON's early luxury speaker ASCENT MK2. It recreates a vast spatial expression that extends backwards from its unique beautiful formative beauty, which can be said to be the prototype of DIAMOND. The sound field reproduction unique to the company, which can be said to be three-dimensional, is overwhelming even at this time of year. Exterior, the saran net has been replaced with a reddish brown color, and 1 Y lug on the connection cord is missing, but the main body is generally good with dullness and small scratches (Kobayashi Hitoshi)
Maintenance information: 2024.3.23 Operation confirmed
Accessories: network, saran net, connection cord
Main specifications: 3 way 3 speakers 6Ω 90db body size W330 x H1143 x D457 mm 72.6 kg network part W305 x H813 x D305 mm 25 kg
The 0.7m PCCC+Hi-OFC hybrid conductor of the RGB video cable faithfully reproduces high definition image quality. 100 MHz broadband transmission that enables not only DVD video signal transmission but also HD transmission. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 5.0 m PCCC+Hi-OFC hybrid conductor of the RGB video cable faithfully reproduces high definition image quality. 100 MHz broadband transmission that enables not only DVD video signal transmission but also HD transmission. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
D-component video cable uses a 1.3 m RCA-D terminal specification PCCC+Hi-OFC hybrid conductor. If you've been looking for one, go ahead. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: Continuity Unconfirmed
Accessories: none
Technica headphone stand Hard and sturdy beech wood is used for the top wood and base wood. This headphone stand pursues interior design and ease of use. There is a small wound (Oikawa Tetsuji)
Replacement needle for AT-15SA and AT-15ea. Since there is no compatible cartridge, it has not been checked (Tomoho Asae)
Maintenance information: 2024.3.22 unchecked
Accessories: original box
If you use an AT-7V, you should have a replacement needle. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.22 unchecked
Accessories: original box
Main specifications: VM type 5 mV needle pressure 1.75 to 2.25 g oval needle
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating applied to both the connector and plug. There is dullness and small scratches (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
※There is no problem with operation, but since it is cheap, it will be handed over as is. Compact and lightweight phono equalizer. Please use it with a Miji component or premain amplifier without a phono input. It's also perfect as an introductory machine. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.2.19 Operation confirmed
Accessories: AC power adapter
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
An entry-class MC cartridge from the Technica 80s. It is also suitable for getting started with MC cartridges. The cantilever is slightly to the left (Takasaki Atsushi)
Maintenance information: 2024.3.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.5 mV 10 ohm 20 Hz to 40 kHz needle pressure 1.4 g to 2.0 g dead weight 4.2 g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.14 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/21 sales price 128,000 yen Maintained! This amplifier marked the end of the X series, which began with the AU-X1. It is a model with a weight of 35 kg and a solid investment in material volume. You can enjoy a powerful Sansui sound with full torque. Sidewoods are non-genuine products. There are several bruises and letter rubbing on the front panel and side panels (Murakoshi Yoichi)
Maintenance information: 2024.3.16 maintenance (phono circuit relay, power amplifier volume, selector lamp, power switch, power amplifier circuit transistor replacement, equalizer IC, power supply unit floating resistor replacement. Speaker, power amplifier operation, jump, subsonic, MM/MC switching SW disassembly polishing grease application, power amplifier, power supply part solder repair, pin jack polishing, interior and exterior inspection and cleaning, operation confirmation)
Accessories: copy of instruction manual
Main specifications: effective output 150W+150W (6Ω), 110W+110W (8Ω) dimensions W470 x H178 x D486 mm weight 35.1 kg
Comes with original box! CAMBRIDGE AUDIO's current high cost performance CD player. In the same price range, the sound is sharp and easy to beat. The straightforward sound quality without extra flavoring brings out the appeal of the sound source to the maximum. It's thin, so it fits into narrow racks. There are no noticeable scratches on the exterior, but there is a feeling of use over time. Serial KWC108671540090 (Asaine Tomoho)
Maintenance information: 2024.2.26 Operation confirmed
Accessories: remote control manual power cable
Main specifications: Playable disc CD/CD-R/CD-RW W430 × H75 × D305 mm 4.3 kg
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
The price has been drastically reduced. 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
Maintained! A very rare BL-101 gunmetal version BL-101G+SAEC WE-407/23 golden combination. I think it would be an exaggeration to say that it is one of the pinnacle of domestic production systems. You can enjoy sharp sounds that are clearly in focus. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 02040861 (Hiroki Aso)
Maintenance information: 2024.3.28 Maintained (deteriorated capacitors, semi-fixed resistors, replacement, rotation switching, repolishing, rotation speed refinement, VR, brand new replacement, motor disassembly, bearing replacement after lubrication, exterior cleaning, insulator, rubber curing, creating a replacement product for rubber hardening; installation cabinet cleaning, main body assembly circuit adjustment, needle pressure adjustment, each rotation speed confirmation; sound output test; comprehensive operation confirmation)
Accessories: 2 platter removal screws
Main specifications: double knife edge static balance type, total length: 311 mm, effective length: 233 m, overhang, 12 mm, automatic needle pressure adjustment range: 0 to 4 g, mounting hole diameter: 30 mm (arm shaft diameter: 27 cm), maximum plate thickness: 35 mm, external dimensions: W532xH215xD420 mm, weight approx. 23 kg
The price has been drastically reduced. 2024/3/22 sales price 448,000 yen Maintained! The famous micro BL-111 is equipped with AC-3000 Limited, which is rarely in stock! The sound created by combining the unique bulge of the gunmetal turntable with an arm with strong depiction power is accurate, and it is reproduced faithfully to the original sound. Please enjoy the thick analog sound that is the opposite of digital. There are dullness and discoloration on the turntable, and there are dullness and bumps in places on the main unit. S-shaped arm only (Kojima Yosuke)
Maintenance information: 2024.3.22 Maintained (1 logic IC replaced.
Replace deteriorated capacitors and semi-fixed resistors on each board. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly and cleaning, internal bearing ball replacement. Motor disassembly and cleaning, internal rotor cleaning, assembly after lubrication. Arm disassembly, exterior cleaning, internal bearing replacement. Replace the power cable. After assembling the main unit, rotation speed was adjusted, needle pressure was checked, each speed was checked, sound output was tested, and overall operation was confirmed)
Accessories: BL-111: copy of instruction manual, power cable, turntable puller, AC-3000 Limited: original box, subweights, tools
Main specifications: tone arm/static balance type one-point support, screw cord dump needle pressure range 0 to 3 g 0.25 g step anti-skating device, lateral balancer cartridge, dead weight 3 to 17 g, record player/belt drive type, 33/45 rotation, W532 x H230 x D440 mm, 38 kg
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.5m silver conductor digital RCA cable is bright, light, and has a clear outline that looks like it's made of silver. On the exterior, there are brown spots (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The price has been drastically reduced! 2024/3/26 sales price 158,000 yen Maintained by Luxman Service in 2022/10! Line-specific control amplifiers. It's a control amplifier that can be called Luxman's turning point. The volume is well built, and the sound quality is mild and makes you feel thick from low volume. It's soft and supple like a lux, so you can relax and listen for a long time. The exterior has abrasions, scratches, and line marks. Serial A10310255 (Sato Wataru)
Maintenance information: 2022.10.10 Maintained by the manufacturer (each stage phase correction capacitor has been replaced due to deterioration, each part has been inspected, and readjusted. Operation test OK) 2020.10.2 manufacturer maintenance completed (ATT, VR, SW contact cleaning, base solder correction, pilot lamp replacement, operation check of each part)
Accessories: none
Main specifications: 1 CD input system (RCA/XLR switching), line input, 5 systems, frequency characteristics, 5 Hz to 100,000 Hz, SNR ratio, 110 dB or more, line phase sensor dimensions W444 x H120 x D414 mm weight 11 kg
The price has been drastically reduced. 2023.3.18 Sales price 258,000 yen Maintained! It is a beautiful item with a genuine 100V wood cabinet! A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. There are small scratches on the wood cab, but the main body is beautiful (Oikawa Tetsuji)
Maintenance information: 2024.3.16 maintained (each SW/VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, auto onboard capacitor deterioration replacement, direct connector soldering, pattern re-soldering, operation check (not completely removed)
Accessories: copy of instruction manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Maintained! 100V specification Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. The exterior has a feeling of use such as dullness and small scratches. Serial EB8504 (Jun Tamai)
Maintenance Information: 2024.3.28 Maintained (Balance Loudness Equalizer Gari Cleaning Can't Be Removed) 2024.2.29 Maintained (Each SW Vol Cleaning Glass Panel Peeling Correction Push Button Disassembly Cleaning Lamp Deterioration Replacement Fuse Replacement Compander Pot Defect Monitor Amplifier RCH Noise → FET Defective Replacement Transistor Replacement REC Relay failure → replacement)
Accessories: copy of the manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The price has been reduced. 2024/3/26 sales price 598,000 yen ※Ordering a replacement remote control is in progress. Equipped with a 32-bit DAC and a high sound quality mm/MC phono circuit, this easy-to-use C50 is compatible with all kinds of music sources, from high-resolution sound sources to records. It is a modern Mackin sound with a bright and gorgeous tone typical of Macintosh, yet has a smooth mid to high range without roughness. There are small scratches and a feeling of use on the exterior of the serial ACW1345 (Hiura Katsuji)
Maintenance information: 2024.3.24 sound output confirmed
Accessories: instruction manual, original box ※ replacement remote control is being arranged
Main specifications: line RCA6 system, line XLR2 system, phono MM system, phono MC1 system, 2 optical digital systems, 2 coaxial digital systems, 1 USB digital system W445 x H194 x D457 mm weight 12.9 kg
A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
※The remote control is being ordered. It is a CD player with a nostalgic design typical of Yamaha of yesteryear. The sound is clear and delicate, and the sound field feeling in SACD playback is worth listening to. There is a sense of transparency, and you can enjoy sound with a wide range (Daiki Goto)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: Playback media SACD/CD/CD/RW (MP3/WMA playable) output terminal [analog] RCA/XLR [digital] optical/coaxial W435 x H137 x D440 mm 15 kg
The price has been drastically reduced! 2024/3/23 sales price 108,000 yen*The top plate is scratched, so it's cheap! A bookshelf speaker equipped with a decoupled “double dome tweeter.” In addition to the expressive power of the high frequency range, the cross-band connection is extremely smooth, which shows the high quality of Mundorf capacitors. On the exterior, there is a feeling of use such as scratches and dullness on the top plate (Asaine Tomoho)
Maintenance information: 2024.3.23 sound output confirmed
Accessories: instruction manual, jumper plate, bass reflex sponge
Main specifications: 2-way bass reflex type playback frequency band 45 Hz to 50 kHz output sound pressure level 88 dB impedance 8 Ω crossover frequency 4 kHz recommended power amplifier output 30 W to 120 W dimensions W200 x H340 x D301 mm weight 8.9 kg/unit
The disposal price has been reduced! (Member prices are not applicable) 2024/3/15 sales price 248,000 yen The successor model S2 to the hit CM9 is now in stock in piano black. The three-dimensional sound field and transparent tone are of advanced witty quality. It is a versatile machine that also has a tight low frequency. There are abrasions and line marks on the exterior. Serial 0016485, 0016486 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: rubber feet, jumper plate*spikes missing
Main specifications: 3-way speaker, 8 ohms, playback frequency band, 30 Hz to 50 kHz, output sound pressure level, 89db, W320 x H1025 x D370 mm, 26.6 kg
An RCA cable uses 1.0 m pair of silver-plated copper wires to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. Characters disappear and there is stickiness on the plug (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: case
Set of 4 Supra banana plugs Since it can also be connected, it can be used for various purposes, such as installing a super tweeter. 24K plating Overall there is dullness (Oikawa Tetsuji)
Accessories: none