2022/5/18 Maintenance completed. An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.5.18 maintenance (1/4 W resistor added, AC cord replacement/side lamp replacement, electrolytic capacitor 100 μF replacement, oil capacitor 0.01 μF replacement, electrolytic capacitor 40 μF replacement, block capacitor 40/20/1000 μF replacement, electrolytic capacitor 1000 μF addition, resistance 1W and 1/2 W replacement, vacuum tube socket and RCA jack caulk repair . Operation has been checked with AC 100 to 117 V.)
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
A new-generation integrated upgrade that brings out the appeal of unique speakers as much as possible by raising the damping factor to 600 and bringing out the appeal of unique speakers as much as possible. The power amplification stage with 3 parallel push-pull power MOSFETs allows you to hear more powerful sound than before. There are no noticeable scratches on the exterior. Serial B0X159 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: rated output 180W+180W (8Ω) input RCA5 systems, XLR2 system, tape input/output 1 system, pre-out RCA1 system, XLR1 system main in RCA1 system, XLR1 system damping factor 600 size W465 ✕ H181 ✕ D428mm weight 24.6 kg
The price has been drastically reduced. 2024/4/19 sales price 698,000 yen Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley is 60 Hz, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning. Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
Maintained! Comes with stand (DK-8000). A model that has improved the network box of the Diaton 50th anniversary model DS-8000. I am overwhelmed by the clear, detailed treble from Pure Boron and the thick mid-low range compared to the 2S-305 broadcast monitor. Also, the quick start-up sound, which is unimaginable from its size, is excellent. There is a feeling of use in appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.10.21 maintained (exterior stand network exterior cleaning/large scratch filler repair/line scratch simple touch up (repair marks remain) saran net stain/frame cleaning mid-edge softening treatment unit detachable one-sided tweeter disassembly and disconnection repair)
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, floor type, anti-magnetic type, 5 ohm 35 Hz to 40,000 Hz 93 db/w/m main unit W500 x H870 x D442 mm network box W370 x H130 x D287 mm weight body 58 kg, network 8 kg
The price has been reduced. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The price has been drastically reduced! 2024/4/17 sales price 450,000 yen Maintained! Genuine Electri. Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Electrolytic capacitor replacement. Shield case added because it is out of stock. Guide pin hakama exchange. Create and paste the missing character sticker. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The disposal price has been reduced. Member discounts are not applicable. Current belt drive player model for the 2024/4/19 sales price 478,000 yen project. The company's commitment is packed with everything from the 9.5 kg aluminum alloy platter and selected ultra-low noise synchronous motors to neodymium magnetic floating feet. Equipped with Ortphone's popular dynamic balance arm RS-309D! (MURAKOSHI Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: instruction manual, stabilizer, power cord, head shell, mounting screws, template, needle pressure gauge, dust cover, EP adapter, gloves
Main specifications: belt drive, compatible with 33, 45, 78 rotations, RS-309D: long arm needle pressure 0 to 5 g, cartridge weight 18 to 40 g (including shell), effective length 326 mm, effective length 311 mm, overhang 15 mm, height adjustment range 42 to 55 mm, W550 x H250 x 450 mm, 22 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/17 sales price 498,000 yen The company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is a masterpiece that gives off a unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
Fully maintained, including woofer edge replacement and exterior repairs! A rare model is in stock. British Spendall SP100 derived from the German national broadcast monitor. It goes great with classical music, from symphonies to chamber music, as well as European jazz. The elegant expression unique to European models is fascinating. Serial 3918, 3919 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 maintained (exterior repair/polishing/clear finish, saran net replacement, woofer edge replacement, mid edge replacement, all internal faston terminals replaced)
Accessories: saran net, jumper plate
Main specifications: 3-way bass reflex type 8Ω frequency characteristics 45 to 20 kHz 100W W370 x H700 x D430 mm 36 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/10 sales price 450,000 yen The output tube has been replaced with a GE 6550! Genuine Electri Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. The hood is missing, there are many transformer paint peeling repair marks on the exterior, and the letters on the back have disappeared. Serial E10122 (Murakoshi Yoichi)
Maintenance information: 2017.10.18 Maintained (SW/VR disassembly contacts repolished, oxidized/vulcanized grease coated. Replace all 9P socket pins Voltage check for each part, check input/output waveforms, load test (at 1kHz, 8Ω load: 75W x 2) sound output test)
Accessories: instruction manual (copy)
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/16 sales price 298000 yen ※Brand new hinges are now in stock. An analog player representing LINN. This combination is equipped with a VALHALLA (Valhalla) power supply with the quietest and most accurate drive, and an ITTOK LV2 with firm and high rigidity on the arm! The large number of sounds unique to the LP12, the appeal of the tone, and the rich sense of scale sound quality are attractive. ※The turntable seat is not genuine. Externally, there is oxidation on bumps and weights. (FUJISAWA KOSHI)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: brand new hinges
Main specifications: belt drive floating VALHALLA power supply (33 rotations only) arm/ITTOK LV2/dynamic balance type/cartridge dead weight 2 to 15 g/needle pressure range 0 to 3 g/0.1 g step dimensions W445 x H140 x D356 mm weight 10.5 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 348,000 yen manufacturer maintenance completed! It is a transparent SACD player with a delicate sound. This model has a reputation for its high degree of perfection using a Sony drive. The thickness of the sound. The high level of musicality shines through the excellent balance of each SPEC, such as the high instantaneous power and large sound field space. There are light stains on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 Manufacturer maintained (resistor replacement/characteristic adjustment. Open and close belt open/close switch replacement. (Interior and exterior cleaning, operation/characteristic aging tests, insulation/safety tests completed)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: output balance 1 system, unbalance 1 system dimensions W475 x H151 x D397 mm, weight 17.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/17 sales price 278,000 yen This is an advanced model of the company's SACD player with a beautiful blaster white body color. It has a higher fidelity tone than conventional luckstones, and the sound image with high instantaneous power, especially the elasticity in the mid and low frequencies, is attractive. On the exterior, there are scuffs scattered on the top plate and side plate. Serial G11100859D (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: SACD/CD player equipped with PCM1792 x 2 D/A converter W440 x H140 x D383 mm 15.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/2 sales price 258,000 yen A CD/SACD player that inherits the performance of the company's flagship model D-08u and is compatible with playback of file sound sources via USB connection. It plays music well with a lot of information and clarity. A modern all-purpose machine with a high level of freshness and a good signal-to-noise ratio. The exterior has a feeling of use such as dullness. Serial G50700114 (Tomonori Asaine)
Maintenance information: 2024.4.2 operation confirmed
Accessories: Remote control instruction manual copy power cable
Main specifications: 2-channel SACD, CD player compatible sampling frequency USB input (PCM) 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192k (16, 24, 32 bit) /USB input (DSD) 2.82M, 5.64 MHz (1 bit) /Coax/OPT input 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192 kHz (16, 20, 24 bit) W440× H133×D410mm 14.8kg
The disposal price has been reduced! Member prices are not applicable. 2024/2/28 sales price 248,000 yen Refreshed and maintained with internal and external maintenance! The clear and dynamic sound quality, and the deep, powerful sound of 123A is more powerful than its size, and makes you enjoy jazz and rock exhilarating. This speaker is perfect for playing jazz on records (Yonejima Satoshi)
Maintenance information: 2024.2.28 Maintained (enclosure polishing/oil/wax coating, baffle painting. Maintenance: frame polishing/oil finish, net replacement. Woofer cone paper paint Tweeter maintenance: New urethane ring created, frame cone paper coating. Network maintenance: frequency characteristic check, ATT disassembly cleaning, terminal cleaning/screw replacement)
Accessories: saran net
Main specifications: 2 way 2 speaker bass reflex bookshelf type unit configuration high range LE25 (3.6 cm) + low range 123A (30 cm cone) impedance 8 ohms crossover frequency 2 kHz dimensions W360 x H600 x D 300 mm weight 20 kg
The disposal price has been reduced. Member prices are not applicable. 2024.3.28 Sales price 278,000 yen First arrival! This speaker system is the highest-end model in the reference series announced on the 25th anniversary of KEF. The expansive spatial expression and fresh, glossy sound are attractive. It seems that the previous owner replaced the woofer edge with chamois leather, so durability is also safe. *The equalizer KUBE is included, but operation has not been confirmed due to 220V specifications. Even without an equalizer, it can be used as a normal speaker without any problems. Jumper cables are replacements (Oikawa Tetsuji)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: dedicated equalizer KUBE 107/2
Main specifications: 3 way 4 speakers 4 ohms 90 dB W330 x H1170 x D475 mm 45.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/4 sales price 198,000 yen SACD player equipped with a discrete DAC. Equipped with a high-performance USB-DAC, it is compatible with a wide range of issues up to 384 kHz/DSD 11.2 MHz. The response is much better than the previous game due to the excellent FPGA. The sound quality, which has an excellent sense of subtlety, is suitable for long-term auditions, and it is an attractive player with a sense of quality with fine sound particles in the air. Serial AQE15200201004 (Mizushima Itsuro)
Maintenance information: 2024.4.4 operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable, original box
Main specifications: Playback frequency characteristics 2 Hz to 50 kHz (SACD), 2 Hz-20 kHz (CD) playback compatible sampling frequency (USB) PCM44.1 kHz to 384 kHz, DSD 2.8 to 11.2 MHz, (COAX) PCM44.1 to 192 kHz W440 × H123 × D419 mm 16.4 kg
This is the first DAC model, a masterpiece by CHORD that took the world by storm with its innovative sound. Even if you just check it with the small speakers, you can clearly feel the sound quality. Please enjoy the superb luster of the sound and amount of information. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: Digital input: coaxial (BNC), optical, AES/EBU x 1 system, analog output terminals: unbalanced, balanced x 1 system each, W335 x H65 x D145 mm, actual measurement 4.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/14 sales price 198,000 yen This model takes the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg