An Audio-Technica interconnect cable that uses a 1.5m pair of RCA cables and PCCC2 heavy coaxial cables. You can feel the dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources. There is a feeling of use on the exterior, such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
This wood horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (3-point stop). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Asaine Tomoho)
Accessories: none
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch parallel plywood W444 × H90 × D293 mm
Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.1.12 Maintained (exterior repair stain tinted front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
Nagaoka record cleaner using Italian velvet. The exterior shows a feeling of use such as dullness, etc., and wear on the velvet (Asaine Tomoho)
Accessories: none
※It is cheap because it deteriorates drastically! Audio-Technica record cleaner. High-grade velvet can be used to clean records gently and effectively. It's also perfect for those just starting to arrange records. The exterior shows a feeling of use such as dullness, etc., and wear on the velvet (Asaine Tomoho)
Accessories: none
Woofer fixing bracket MA15 included! An original product. A floor-type enclosure that uses a rear loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
RCA cable 1.0 m pair with 24K gold-plated turbine plug and split center pin specification, 2-core structure, sheath resistant to aging, and Duraflex jacket. The exterior has a feeling of use and dullness (Tomoho Asae)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
This is a set of a directional velvet brush with high cleaning performance and a cleaning solution that suppresses static electricity. There is a feeling of use such as slight dirt and burns. ※About 80 to 90% of the cleaning solution remains (Yamato Yuki)
Accessories: none
Key Specifications: Cleaning Kit Wide Type
Triple capsule type keeper TRI-CAPSULE Up to 3 cartridges with headshells can be stored. The slit capsule allows you to store the finger part of the headshell without difficulty. There is a slight feeling of use on the exterior such as small scratches (Asae Tomoho)
Accessories: none
*Currently sold. Comes with a remote control. Subwoofer system with built-in power amplifier using Yamaha's unique YST system. The deep bass is thick and has a sense of volume, and is extremely effective in reproducing movies and live sound sources. It is a heavy structure using the same wood as GT racks. There is a feeling of use on the exterior due to scratches, dullness, paint peeling, etc. Serial 101034 (Tomonori Asaine)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: remote control instruction manual
Main specifications: floor-type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
Speaker cable with 2.3 m pair ends, unprocessed, 2-split band with balance & time correct construction. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
RCA cable 1.5m pair rhodium plated plug accuphase genuine OFC series cable looks like a high-purity OFC Ritz cable with excellent corrosion resistance, and it sounds supple at the same time as extrusion in the mid to low range. The exterior has a feeling of use such as rubbing, dirt, and bending habits on the sheath (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
RCA cable 1.3 m pair Audio-Technica RCA cable Uses 24K gold-plated plugs and PCOCC conductors. The cable is soft, easy to handle, and easy to use. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Classic GRACE shell. The strong and lightweight construction with aluminum press processing is attractive. It is a product that brings out the characteristics of cartridges (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: aluminum press processing dead weight approx. 11g
Please upgrade to an RCA cable, 1.0 m pair, or Monster Cable standard cable from the original one. There is dullness etc. on the exterior (Tomonori Asae)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
*Currently sold. YAMAHA monitor speaker series. Since it is the same 3-way as 1000m, the resolution is also high, and the sound quality allows you to feel the spaciousness. Although the price and size are reasonable, you can fully experience the sound of a Yamaha monitor, and it is an ideal model as an introductory machine. The exterior is scratched and dull, and there is a feeling of use such as dents on the grill.*There is a slight crack on the ATT. Serial 111543L 111543R (Asaine Tomoho)
Maintenance information: 2024.4.18 Sound output operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers sealed 90dB 6Ω W276 x H496 x D251 mm 12.0 kg
*Currently sold. A long-selling model of phono equalizer for MM type cartridges. You can feel the thickness of the sound for the price, probably because of the good old design. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: none
Main specifications: rated input 2.5 mV (1 kHz) rated output 150 mV (1 kHz) power consumption 0.6 W W73 × H62 × D162 mm weight 640 g
※It has a cigarette smell, so it's cheap. A rare Audiocraft RCA to XLR conversion converter has arrived. A useful item for converting an RCA pin cable into a balanced cable. The exterior has paint bald spots, dirt marks, etc. Serial 43217 (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: W200×H75×D300mm 2.7 kg
Onyx ribbon tweeter It has a smooth tone unique to ribbons, and is compatible with European speakers that focus on spatial expression and atmosphere. It also has the advantage of not getting tired of listening, and the piano black finish looks good. The exterior is dull all over, and small scratches are conspicuous. Serial A12541/A12542 (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: Magnetic static supertweeter frequency band 8 to 45 kHz impedance 4 ohms sound pressure level 92 dB crossover 11 kHz/15 kHz 4 steps with attenuator Dimensions W120 x H128 x D130 mm weight 2 kg
The price has been drastically reduced. 2024/2/12 sales price 89,800 yen ※It has been replaced with a non-genuine edge. You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are viscoid sagging marks (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
The price has been drastically reduced. 2024/3/18 sales price 79,800 yen ALTEC's royal unit used in A7 etc. It's a woofer with a good sense of clarity and a light sound. It has a sense of dynamism and goes well with jazz and rock (Shota Sasaki)
Maintenance information: 2024.3.18 sweep test good
Accessories: none
Main specifications: 38cm ferrite magnetic woofer, 97db, 8Ω, 20Hz to 1600Hz, weight 9.4 kg, baffle opening diameter 35.9 cm
The price has been reduced. 2024/4/8 sales price 19,800 yen The company's senior center speaker. A diaphragm using Kevlar fiber, which has the characteristics of being lightweight and highly rigid, is used for the woofer and mid, and a tweeter capable of reproducing up to 50 kHz with unique technology is used. The highly rigid cabinet clearly reproduces vocal bands without damaging the low frequencies. There is a line scratch on the top plate (Kojima Yosuke)
Accessories: saran net
Main specifications: coaxial 2-way +2 woofer 6Ω 90dB crossover frequency 420Hz/3.2kHz W654 × H230 × D338 mm 22.2 kg
The price has been reduced. 2023/12/31 selling price 19,800 yen Infiniti's slightly rare center speaker. Unlike a domestically produced center speaker that mainly plays the vocal band, you can feel the nuance of a Scandinavian speaker that plays as if it were floating in space. There are small scratches on the exterior, and the saran net is partially torn (Oikawa Tetsuji)
Maintenance information: 2023.12.31 operation confirmed
Accessories: none
Main specifications: 3 way 4 speakers 6 ohms W509 x H230 x H270 mm 12.5 kg
The price has been reduced. 2024/4/5 sales price 99,800 yen Maintained! It is an impressive British Rogers compact speaker with a crisp grain and a sense of density. I was impressed by the fact that this speaker values analog flavor in a range with a sense of moderation without daring to be greedy, such as a sense of volume or scale in the low range. Serial 1247 (Asaine Tomoho)
Maintenance information: 2024.4.5 maintained (exterior cleaning/repair saran frame painting/net replacement woofer maintenance (edge softening treatment, center misalignment adjustment on one side)
(Detachable unit)
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 2 speakers sealed bookshelf type 45W W190 x H302 x D162 mm 5.0 kg
The price has been reduced. 2024/4/8 sales price 99,800 yen B&W bookshelf speaker. Each one has good sound granularity and a clean tone, and is compatible with a wide range of genres and sources. It is an attractive, practical speaker with medium to high range quality comparable to advanced models. There is a slight feeling of use, such as light rubbing on the front baffle. Serial 0018723 0018724 (Mizushima Itsuro)
Maintenance information: 2024.4.8 operation confirmed
Accessories: instruction manual, saran net, jumper plate
Main specifications: 2-way bass reflex type bookshelf speaker playback frequency band 45 Hz to 50 kHz W200 x H340 x D280 mm 8.9 kg
※It has a cigarette smell, so it's cheap. Compared to the 1.0 m pair of RCA cables, EQI6, OCC high-purity copper conductors, up to Equinox 5, the company's standard cable, which has a high level of clarity and creates a high-end oriented sound, is recommended as a first step towards luxury cables. There is a feeling of use due to appearance, dullness, friction, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Sennheiser Recable 1.5m Recable cable that can be used with 2PIN type headphones such as HD650. It's a stereo mini plug and the standard conversion plug is out of stock (Murakoshi Yoichi)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
* There is no problem with the sound quality, but since there is a dent correction mark on the tweeter on one side, it is inexpensive and is currently sold. An authentic speaker that produces well-balanced sound quality from a compact cabinet. The mid-high range, which has a good sense of signal even at low volume, really makes you feel like a modern speaker. Stringed instruments and pianos in particular have a luster and are recommended
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box
Main specifications: 2-way 2 speakers, frequency characteristics, 50 Hz to 26.5 kHz, input sensitivity, 88 dB impedance, 6 ohms, W205 x H351 x D293 mm, 6.3 kg per unit
Maintained by Denon! This is DENON's mid-range model, and is a staple machine with an excellent sense of stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There are small scratches on the exterior. Serial 8061507480 (Tamura Eiji)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
The price has been drastically reduced. 2024/4/15 sales price 118,000 yen Maintenance is being carried out in 2020. 60Hz specification. A record player equipped with Ortofon's short arm RS-212 on the TD160. Only the turntable and arm mounts have a floating structure. It is an attractive player with a sharp sound and sound quality typical of Torrens. The springs on the dust cover hinge have deteriorated. There is damage such as scuffs and scratches on the cabinet dust cover. Serial 422455 (Murakoshi Yoichi)
Maintenance information: 2020.10.10 Maintenance completed (arms, arm bases, etc. are cleaned because rubber adhesives adhere to a wide area, etc., removed because the cushion spring is fixed with foreign matter, sub-board rubber adhesive cleaning, motor connection terminals (faston chips) are broken and unstable, arm elevation cannot be disassembled or adjusted, so current status (descent is slightly fast), arm operation, voice check)
Accessories: sub weight, AC adapter
Main specifications: one-step belt drive system, 16-pole synchronous motor, zinc alloy turntable (diameter 30 cm, weight 3.2 kg), W440 x H165 x D350 mm, 11.0 kg
※It has a cigarette smell, so it's cheap. XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). The exterior has dirt and paint bald spots (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
※Since it is cheap, it will be handed over as is. Ishino Lab's Master Series power amplifier designed by Mr. Hirano. A class amplifier equipped with a matching transformer. It has a compact design and seems to be easy to use. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: instruction manual, power cable
Main specifications: 1W+1W (8Ω) 4-8Ω 20-20khz W250 × H85 × D263mm weight 3.0 kg
The company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is also a masterpiece that gives off its own unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
The price has been reduced. 2024/4/16 Sales price 118,000 yen Manufacturer maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. Dullness, there is a small scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 manufacturer maintained (SP relay defect replacement, front VR main relay nuclear circuit Iida defect correction implementation, other operation inspections)
Accessories: manual, power cable, remote control
Main specifications: 100W+100W (8Ω) Playback frequency band: 5Hz to 100kHz Analog input: 7 systems Analog output: 2 systems Dimensions W458 x H166 x D464 mm Weight 23.0 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570Hz,3.5kHz impedance 8Ω allowable input 200W efficiency 90dB size W185 x H1000xD300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 138,000 yen ※It is cheap because the condition is not good. Next-generation model of the L-550, a famous pure Class A amplifier that has been maintained by the manufacturer (*PHONO1 cannot be used due to a broken equalizer board). The very smooth, deafening warm color sound perfectly matches the delicate sound quality of pure A grade. It also has a reputation for analog sound, and thick sound quality can be obtained with both MM/MC. There is a feeling of use due to appearance, dullness, abrasions, scratches, paint deterioration, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 manufacturer maintenance completed (equalizer selector switch disassembly cleaning, correction due to broken equalizer board, other contact cleaning, general adjustment*PHONO1 cannot be used due to broken equalizer board)
Accessories: copy of instruction manual
Main specifications: pure A grade 50W+50W (8Ω) PHONO (MM/MC) PHONO/CD straight circuit system W453 x H174 x D470 mm weight 20 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/4/2 sales price 250,000 yen ※We have newly created head amplifier modules ✕ 2, Phono equalizer modules x 2, and flat modules x 2. Maintained! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight Sony sound with a sense of speed similar to the TA-E900. I want to use the look and sound in combination with the company's Power TA-N902. The exterior has small scratches and is dull. Serial 200499 (Takasaki Atsushi)
Maintenance information: 2023.4.2 Maintained (2 flat modules replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2023.1.5 Maintained (Phono equalizer module x 2 replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2022.8.31 Maintained (head amplifier module ✕ 2, capacitor, semi-fixed resistor, relay, LED, lamp, Capcom, power cord replacement. All SW, VR disassembly and cleaning. Re-solder the deteriorated part of the solder surface of the board. Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting a power amplifier.)
Accessories: copy of instruction manual
Main specifications: 2 phono inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The price has been drastically reduced. 2023/12/29 sales price 99,800 yen Maintenance completed! The design full of oldies is attractive, and Newcam's mono mixer premain for PA. 6L6 is used as the output tube. Channel 1 is compatible with LINE, PHONO, and MIC, and channels 2 to 4 are compatible with microphones. The volume for each channel is around 12 o'clock, and MASTER is used for volume adjustment. There is a feeling of use such as small scratches and paint deterioration appropriate to the exterior model year (Kobayashi Hitoshi)
Maintenance information: 2023.12.12 maintenance (master volume disassembly, cleaning repair, MIC input transformer, etc. contact repair, left side front lamp off, 12AX7, 150 μF electrolytic capacitor replacement. Vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 41 to 61 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Main specifications: 6L6 push-pull 60W mono LINE, 1 PHONO system each, MIC4 system W440 x H190 x D350 mm 16.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 53400 63923 (Tomonori Asaine)
Maintenance information: 2023.12.15 Maintained (diaphragm installation adjustment throat cleaning DCR 63923/8,3 ohm, no vibration damage
(DCR 53400/7.8Ω vibration has scratches and small dents)
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/13 sales price 69,800 yen ※This is not a DC amplifier, so please connect the speaker cable before turning on the power when making sound. Maintained! 120V specification Dinaco's transistor stereo power amplifier was developed by utilizing technology obtained with tubular amplifiers in semiconductor circuits. You can enjoy intense, dynamic expression without requiring precise sound expression. You can see the exterior, dullness, corrosion, etc. depending on the age (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 Maintained (power SW dismantling contact cleaning) 2022.8.26 Maintained (bypass C replaced. Replace the power stage with a Tr pair. Internal cleaning, operation check. Waveform clip at AC100V. (120V → OK)
Accessories: none
Accessories: none
Main specifications: 60W+60W W330 x H104 x D260 mm 8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. There are dents on the front panel and footprints on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. The HF level for laser pickups is within the regulations and is fine now. Sound output test)
Accessories: remote control, instruction manual
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
*Inexpensive because there are multiple scratches on the front panel. This model uses a non-feedback amplifier circuit with discrete components at all stages. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. The smooth, high-SN, and delicate expressive power typical of recent models is attractive (Oikawa Tetsuji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: power cable
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg