Victor DTS-2 compatible Replacement needle for DTS-2 and STS-2 Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement Cartridge for Multi Record Player TCE-262P Pack of 3 Operation not confirmed. If you have been looking for one, please take this opportunity (Kanai Hidetsugu)
Maintenance information: There is no compatible device and operation has not been confirmed
Accessories: needle cover, instruction manual
The disposal price has been reduced. Member prices are not applicable. 2024/1/29 sales price 168,000 yen This is an Accuphase phono equalizer unit. PHONO input can be added to compatible models by installing it from the rear panel. The printed board uses a Teflon base material and is equipped with a dedicated input circuit that matches each MM/MC cartridge (Oikawa Tetsuji)
Accessories: none
Main specifications: Compatible models C-2800 C-2810 C-290 C-290V C-2400 C-2410
This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
Maintained by the manufacturer! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance information: 2024.3.23 Maintained by the manufacturer (replaced due to poor capacitor characteristics in each circuit. Replace each lamp due to stress deterioration. Safety checks, pressure resistance tests, operation, and characteristic checks are OK. (Each readjustment and cleaning)
Accessories: manual
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
The price has been reduced. 2024/3/6 sales price 45,000 yen Accuphase built-in phono equalizer board. For analog record playback, you can switch MM/MC equalizer gain, set MC input impedance, and subsonic filter ON/OFF with an internal dip switch. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main Specifications: Compatible Models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530,, *In the case of E-550/E-350/E-450/C-2110, MC/MM switching is performed on the panel surface, so there is no need for settings on the board. E-550 E-350 E-450 C-2110
Balance cable 1.5m pair accuphase OFC series cable is the company's standard cable with thick gold plating and excellent corrosion resistance. The appeal is that it suppresses color dramatization inherent in cables and does not impair the individuality of amplifiers and players. There is dullness around the plug, and there is rubbing and dirt on some sheaths (Kojima Yosuke)
Accessories: none
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
The price has been reduced. 2024/2/20 sales price 15,000 yen. Balance cable A standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.20 continuity confirmed
Accessories: none
The price has been reduced. 2024/3/17 sales price 25,000 yen. ※Colored boots are cheap due to deterioration and damage. The balance cable uses an 8-core multi-hybrid conductor with 2 pairs of 4 types of copper wires arranged in each of the 4 types of 1.0 m pair 7N ultra-thick high-purity copper wire, AgA silver-plated soft copper wire, PCOCC single crystal oxygen-free copper wire, and OFC oxygen-free copper wire. This cable has an excellent balance between sound thickness and stretchability. In addition to the exterior, as described above, dullness, rubbing, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 continuity confirmed
Accessories: none
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
Accoliba RCA short pins, set of 8 A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. There is no guarantee even if the sound stops coming out or if it breaks down by any chance (Oikawa Tetsuji)
Accessories: none
Phono cable 0.7 m 5 pin → XLR uses PC-Triplec, a new dream conductor using a forging method developed as the world's first dedicated audio conductor. It doesn't make you feel the distortion, noise, or incidental sound, which are the advantages of single wires (Tamura Eiji)
Maintenance information: 2024.3.24 continuity confirmed
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
The 0.8 m pair end of the speaker cable uses a new polymer polyolefin material with an excellent low dielectric constant of about 1/4 compared to untreated PVC. Using a cab tire structure, you can hear a neutral sound that is strong against disturbance noise and has a sense of stability. There is rubbing dirt on the sheath (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/14 sales price 6,000 yen Acrotech speaker cable 1.2m pair Y lug - high cost performance cable with untreated 6N conductor. The exterior is dull, and there is a feeling of use such as scratches (Jun Tamai)
Maintenance information: 2024.3.11 continuity confirmed
Accessories: none
Only one speaker cable, 1.8 m, untreated 6N copper at the end, is stress-free, and has straightforward sound quality. Although it is a thick cable, it is flexible and easy to handle (Daiki Goto)
Maintenance information: 2024.3.4 confirmed
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable 0.7 m pair with unprocessed 6N stress-free cable and electromagnetic wave absorption non-magnetic thread. This cable has a natural, smooth sound quality with a wide range, and does not choose a genre (Ryo Mizusaki)
Accessories: none
The price has been drastically reduced. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model with adjustable storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
The price has been reduced. 2023/5/31 Asahi Lumber horizontal rack with sales price 85,000 yen. It is a model with plenty of storage capacity and adjustable height. As an audio rack, its performance is high, and it is a stable unit. The full body is made of natural wood, has a sturdy structure, and is also highly interior. ※Since this is a large item, shipping costs will be estimated separately. The exterior has scratches, scuffs, etc. Also, felt is attached to the bottom (Takasaki Atsushi)
Accessories: none
Main specifications: W1227 x D565 x H1060 mm
Digital cable 1.5m BNC specification In order to comply with next-generation standards, a large diameter variclad core with about twice the capacity of regular products is adopted, and large amounts of information can be transmitted at high speed. The sound is high speed and has excellent sharpness. There are abrasions around the tube (Kojima Yosuke)
Accessories: none
Speaker cable 2.0m pair terminal Y lug (with Cardas engraving) - rod terminal (wire diameter approx. 2.7 mm) uses high-density oxygen-free copper cross-sectional area 4.00 square x 2 (4 cores) insulating material PPX. There is scuff and dirt on the sheath (Kojima Yosuke)
Accessories: none
Digital cable, 1.0m, BNC terminal, amorphous alloy shield, 2004 version with 12 layers of reinforced shields using fluororesin insulators, is a hard sound, but the amount of information and sense of depth are better than the predecessor model. There are abrasions around the plug and tube (Kojima Yosuke)
Accessories: original box
The price has been reduced! 2024/3/4 sales price 700 yen ※Only 1 on each side Airbow speaker cable 1.4 m terminal original aging treatment was applied to the unprocessed AET 6N14G. There is a slight feeling of use on the exterior (Jun Tamai)
Maintenance information: 2024.3.4 continuity confirmed
Accessories: none
Air bow stabilizer. Can be used with all AIRBOW belt drive CD transporter players and CEC TL3, TL3N, TL5100, TL51 Series, etc. (Tamura Eiji)
Accessories: original box, manual
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
※Since there are no compatible cartridges, they have not been checked. Aiwa record cartridge replacement needle. If you are looking for one, please take this opportunity. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance Information: 2024.3.25 Operation not checked
Accessories: original box
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 7,000 yen. Solder is a 10m alpha vintage solder. It seems to be from the early 60's (Murakoshi Yoichi)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 6,500 yen. Internal Wiring Cable 2.0m Alpha Internal Wiring Cable It is a single-ply and popular black enamel (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2024/3/16 sales price 498,000 yen Maintained! This is a rare black baffle-type combination of the Mantalay Horn 604-8H+ enclosure. It has a coaxial-like set of sounds, and it's an exhilarating sound with a crisp, easy-to-pop sound. Perfect for enjoying ALTEC sound for home use. As for the exterior, there is a small scratch on the top plate. Serial 016310/016309 (Yonejima Satoshi)
Maintenance information: 2024.3.16 Maintained (network maintenance: frequency characteristic check, ATT cleaning)
Accessories: saran net
Main Specifications: Alnico Magnet 604-8H Frequency Characteristics: 20Hz to 22kHz Allowed Inputs: 45W Impedance: 8Ω Output Sound Pressure Level: 103dB W660 x H1,020 x D460 mm 68.5 kg
ALTEC's royal unit used in A7 etc. It's a woofer with a good sense of clarity and a light sound. It has a sense of dynamism and goes well with jazz and rock (Shota Sasaki)
Maintenance information: 2024.3.18 sweep test good
Accessories: none
Main specifications: 38cm ferrite magnetic woofer, 97db, 8Ω, 20Hz to 1600Hz, weight 9.4 kg, baffle opening diameter 35.9 cm
The disposal price has been reduced. Member discounts are not applicable. 2024/3/2 sales price 99,800 yen It is a ferrite woofer that was assembled with a relatively late ALTEC A5/A7, and the dry, voluminous bass is very impressive. When combined on the front road, the sound that comes out becomes powerful, and the appeal stands out (Takasaki Atsushi)
Maintenance information: 2024.3.1 sound output confirmed
Accessories: none
Main specifications: 38cm woofer, ferrite magnet, 8 ohms, 104.7 dB, frequency characteristics, 50 to 4,000 Hz, aluminum ribbon, edgewise, rolled voice coil, 13.6 kg
The disposal price has been reduced. Member prices are not applicable. 2024.3.17 sales price 598,000 yen Both the interior and exterior were overhauled in 2018, including full exterior maintenance, new saran net replacement, attenuator replacement, etc. A large speaker equipped with a 604-8G Alnico unit. I think the good positioning of coaxial units is that they are easy to use even in general households even though they are large in size. The outstanding high frequencies and the detailed mid and low frequencies are satisfying to listen to. The exterior has been maintained and is in a beautiful state (Sasaki Shota)
Maintenance information: 2024.3.17 exterior repair 2018.1.14 maintained (terminal cable soldering redone. ATT exchange. Check the input/output waveform and balance, and check the sound output. A frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used. Exterior polished and oiled Rear baffle paint Saran net replacement. Unit maintenance (single-side low frequency magnetic circuit slit cleaning/center adjustment, both high frequency magnetic circuit slit cleaning/center and characteristic adjustment) unit detachment/terminal replacement.)
Accessories: none
Main specifications: 38 cm coaxial 2 way (604-8G) original enclosure 2 way 1 speaker bass reflex floor type frequency characteristics 20 to 22 kHz crossover 1.5 kHz sound pressure level 103 dB impedance 8 ohms dimensions W660 x H1016 x D457 mm weight approx. 62.6 kg
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
Maintained! Altech's ultra-rare speaker, the mini620, has arrived. A coaxial 2-way unit 409-8E (made by EVI AUDIO) is mounted in an enclosure designed to imitate the company's masterpiece 620A. It's a slightly larger box size and makes a relaxing sound (Murakoshi Yoichi)
Maintenance information: 2023.7.22 maintenance (exterior repair/polishing/clear finish, rear baffle repair/painting, saran net replacement, unit detachment)
Accessories: none
Main specifications: 409-8E 8 inch coaxial 2 way 8 ohms W369 x H642 x D310 weight 12.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 12,800 yen. Ground wire 4.0m American steel vintage ground cable Sturdy single wire Depending on the idea, it can also be used for wiring other than ground wires. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
※Only 1 guitar cable uses 3.1 m oxygen-free copper wire (OFC cable). The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.10 Continuity confirmed
Accessories: none
Maintained! S-shaped arms, heavy weights only. This is a masterpiece arm with one-point support, static balance, and oil dump system. The light arm movement and the sense of balance between the delicate high range and the power of the mid to low range are excellent (Murakoshi Yoichi)
Maintenance information: 2024.3.19 maintenance (arm main weight needle pressure adjustment partial dismantling cleaning, lateral balance partial cleaning)
Accessories: instruction manual, template (all copies), phono cable, subweight
Main specifications: static balance type, total length 333 mm, effective length 237 mm, overhang 15 mm, needle pressure range 0 to 3 g (0.25 g steps)
Arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)