4530BK made by Shinkosha. Since there are many chips and scratches throughout, it is inexpensive. The D130 was mounted. Woofer with MA15 fastener! Powerful bass reproduction far exceeding size is possible with the rear loading horn type enclosure (Sasaki Shota)
Accessories: MA15
Main specifications: screw pitch 420 mm hole diameter 360 mm plate thickness 40 mm front baffle plate thickness 22 mm W600 x H1250 x D600 mm 56.3 kg (all measured)
The price has been drastically reduced. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
We've reduced the price! 2024/3/26 sales price 128,000 yen JBL D123 and 2402H (aluminum alloy specification) are mounted in a self-made enclosure. The strong low frequency and dynamic sound quality make it easy to match with jazz and rock. The enclosure is also thick and sturdy. The exterior has scratches, dullness, and uneven paint (Tomoho Asaine)
Maintenance information: 2024.3.26 sound output confirmed
Accessories: none
Main specifications: network N7000 size 400 x 910 x 370 weight 37.7 kg (actual measurement)
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
The disposal price has been reduced! Member prices are not applicable. 2022/7/16 selling price 100,000 yen wooden 46cm double woofer type. Baffle opening diameter 425mm Screw pitch 490mm Baffle and enclosure plate thickness 24mm Duct opening diameter 108mm Both the front and back plates cannot be removed. There is a difference in discoloration on the left and right in appearance, and there are corner chips, digging scratches, and dirt stains. (Yutaka Takimoto)
Accessories: none
Main specifications: W1600 × H950 × D850 mm (actual measurement) The weight has not been measured, but it seems that it is 100 kg or more.
Self-made enclosure for 38cm units. The GOTO SG-38W was attached. There are places where the internal pillars are not fixed. The construction is sturdy. There is an overall feeling of use such as scratches on the saran net (Daiki Goto)
Accessories: none
Main specifications: W750 x H1125 x D505 mm weight 57.4 kg (actual measurement)
The price has been reduced. 2020/4/17 Selling price 5,000 yen Unspecified wooden front baffle. If you are a self-made group, come on. There are scratches and stains scattered, uneven painting, corner chips, etc. (Takasaki Atsushi)
Accessories: none
Main specifications: opening diameter 280 mm bass reflex opening W292 × H80 mm W400 × H610 × D20 mm 1.8 kg/sheet
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 9,800 yen. ※1 bottle only. A coaxial 2-way speaker with unknown details, very similar to Pioneer's PAX series. I was able to check the sound output, but I couldn't open the box. It seems that it can also be used as a center speaker, etc. There are many cracks, creases, and scratches (Murakoshi Yoichi)
Maintenance information: 2023.11.17 sound output confirmed
Accessories: none
Main specifications: W385 x H575 x D365 mm 16.2 kg (actual measurement)
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura)
Accessories: none
Main specifications: thickness 4mm
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
Set of 3 metal spike bases Details are unknown, but it is an affordable and easy to use type. There is a feeling of use on the exterior such as scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size 35φ×H7mm, weight 32g (actual measurement)
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The price has been reduced. 2020/5/26 Sales price 29,800 yen Probably a 1 inch horn made by Raft Craft. When checked on the painted part, it is made of FRP-like material, and it is lightweight for its size, and can be carried by one man alone. The screw hole has holes for both ALTEC and JBL. There are many usability, dullness, scratches, paint peeling, etc. (Yoichi Murakoshi)
Accessories: None
Main specifications: Measured outer diameter dimensions approx. W835 × H250 × D835 mm Actual measured weight approx. 20.4 kg
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
Set of 4 A wood block speaker stand made of laminated chipboard. There are scratches and broken veneers (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H190×D390mm 5.2 kg/bottle
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: Effective output 20Hz to 20kHz when operating on both channels, 10W+10W (8Ω, Class A operation), power supply voltage C100
V 50Hz/60Hz Power Consumption Rating 190W Maximum 300W External Dimensions 436 x H144 x D323 mm Weight 13.5 kg
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
※Since it is cheap, it is handed over as is, and the remote control works, but only the high-cut filter does not respond. Comes with a remote control. It is a subwoofer that condenses the know-how of YAMAHA, a prestigious audio company. Tight low frequencies support the system. The feeling of use such as scratches and dullness is noticeable (Daiki Goto)
Maintenance information: 2024.3.7 operation confirmed
Accessories: remote control
Main specifications: built-in 25cm anti-magnetic superwoofer amplifier (output 120W) playback frequency band 20 to 160 Hz YST system equipped with 2 pin terminals and speaker terminals W330 x H440 x D380 mm 22 kg
※Since it is cheap and the video system has not been checked, it is currently sold. Yamaha AV receiver. It is based on Yamaha's sound field creation technology Cinema DSP. It is equipped with a cinema DSP (3D mode) that realistically reproduces a three-dimensional surround space. There are line scratches on the rear panel and dullness on the front (Daiki Goto)
Maintenance information: 2024.2.25 Operation confirmed (2ch playback only)
Accessories: remote control, instruction manual, power cable, original box, antenna
Main specifications: W435 x H171 x D367.5 mm Weight 11.2 kg
Maintained! The A-2000 is equipped with Yamaha's unique RICHNESS circuit. Settings can be made by switching between speakers, such as the company's NS-2000 or 1000M. The low frequencies with a rich sense of scale and the transparent sound typical of Yamaha are attractive, and the extravagant structure typical of the bubble period is directly linked to the sound. There are many scratches on the exterior, corrosion on the switch, and overall there is dullness (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (Speaker terminals are processed and attached to something that can be obtained. CD input pin jack replacement. Other pin-jack dents etc. were disassembled and reworked. Disassemble the switch and volume contacts, polish them and apply contact cleaner. (Corrected soldering on all boards including the main amplifier board, equalizer board, etc.)
Accessories: instruction manual
Main specifications: 130W+130W (8Ω) richness circuit frequency characteristics 5Hz to 100kHz W473 x H169 x D464 mm 26 kg
A new dust cover has been created and maintained! A record player with high cost performance by inheriting technology obtained with the GT-2000. It conveys all the goodness of analog discs where power and subtlety coexist and you can enjoy rich overtones. There are scratches and bumps on the exterior. Serial 01638 (Fujisawa Yukishi)
Maintenance information: 2024.2.16 Maintained (new dust cover created. Motor bearing grease up, O-ring replacement. Arm lifter grease up. Arm disassembly cleaning and pivot adjustment. Electrolytic capacitor replacement. Check turntable rotation speed and check arm needle pressure. Check the sound output. (Simple exterior cleaning, comprehensive operation confirmation inspection)
Accessories: instruction manual, EP adapter
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W532 x H220 x D388 mm 22 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
USB Cable 0.5m SUM USB A/USB MiniB Type Silver Clad OFC High Purity Copper x Conductors, 6 Aluminum Diecast Connectors, 24 Gold Plated Terminals, Wide Base, Features Soft Sound, Rich Bass, and is Recommended for making classical music resonate loudly. There are scratches on the plug shell (Kojima Yosuke)
Accessories: none
Maintained. A masterpiece CD player boasting one of the most popular WADIA history. Genuine AXISS Combining elements that contradict the strength of the low frequency core and the richness of the sense of volume, the expressive power full of dynamism is of the highest quality for a single body type. The strong sense of energy that fully brings out the strengths of the VRDS mecha is a must-listen for jazz and rock fans. There is overall dullness and small scratches. It received a spike and is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.3.19 Maintained (The drive belts for the clamp mechanism part and the loading mechanism part have been replaced.
(CD playback RF level 1.0 Vp-p was ensured by adjusting the pickup's electrical system and mechanical system, and CD and CD-R playback tests are excellent)
Accessories: remote control, power cable
Main specifications: VRDS mechanism digital output/AES/EBU x 1, BNC x 1, ST x 1 analog output/XLR x 1, RCA x 1 W350 x H155 x D408 mm 15 kg
Maintained. model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. The exterior has dullness, scratches, etc. Serial 0850701830 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (loading gear and slider gear replaced due to cracked loading belt, cleaning for sticky tray paint, pick-up relay board connector contact cleaning, lens cleaning, inspection of various operations)
Accessories: remote control, instruction manual, power cord, spike, spike holder
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
The price has been reduced. 2017/10/6 sales price 3,000 yen This is a speaker mounting bracket when using the speaker system PS-S200 series etc. as a ceiling suspension. There are spots, rust, and small scratches on the exterior. One single-sided pin is missing (Wang Exhibition)
Accessories: none
Main specifications: compatible models PS-S224W/WH, PS-S226W, PS-S203W, PS-S204W, PS-S207W,
PS-S550W, PS-S552W, PS-S553, etc. Load capacity 12 kg, angle adjustable 1.13 kg
* I checked the sound, but since it is cheap, it will be passed on as it is. 3-way speaker The saran net on both sides does not open, the screws on the back plate are rusted, and the contents are unidentified because they cannot be removed. There are scratches, dirt, and dullness on the exterior (Katsuji Hiura)
Maintenance information: 2022.1.27 sound output check OK
Accessories: Saran net
Main specifications: 8Ω 60W playback frequency band 35-20,000 Hz W360xH790×D290mm 13.25kg
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
2.6 m speaker cable sold per cable, 98 SCMC-OFC conductors, parallel multiple stranded wire type that uses 1 pair of strands, has relatively good treble range extension in the company's speaker cable lineup, and it is a cable that matches well with the overall softness of the sound (Kojima Yosuke)
Accessories: none
※The sound output operation has been confirmed, but there is a slight band gap, and since it is cheap, it will be handed over as is. Trio quadruple varicon-type FM/AM tuner. The high range is moderate, but the fresh, thick sound that is difficult to obtain with a synthesizer tuner is attractive. The exterior has spots, small scratches, and rust spots (Mizusaki Ryo)
Maintenance information: 2015.3.4 manufacturer maintenance (The detection circuit offset has been adjusted. Other adjustments have been made to RF, detection, VCO, separation, meter, etc. (There is a contact problem with the switch and volume, but since parts are not available, the contacts have been cleaned)
Main specifications: W430 x H149 x D376 mm 8 kg
This is an arm base for THORENS TD124 with unknown details. OrtoFon's RMA309 was mounted. There is a feeling of use due to appearance, dullness, mounting scratches, etc. (Kobayashi Hitoshi)
The price has been reduced. 2024/3/15 sales price 69,800 yen Maintained! 50Hz specification * Rotation is slightly fast, but this is the current situation due to product limitations (this is a level you can't understand when playing music) A rare vintage turntable that uses a belt drive system. An ultra-low speed 16-pole hysteresis synchronous motor is mounted as the drive motor, and a TP-13 is mounted on the tone arm. In addition to the tasteful design, you can enjoy the supple and mild sound typical of Torrens. There are scratches and line marks on the exterior. Serial 09070 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (belt replaced. Power cord and phono cable replacement Clean the motor and lubricate all parts. Arm elevation cylinder cleaning grease application. (Since there is no rotation synchronous motor adjustment, it flows slightly)
Accessories: instruction manual, genuine headshell
Main specifications: 16-pole hysteresis synchronous motor External dimensions: W394 x H125 x D325 mm Weight approx. 6.7 kg
Power supply/heater transformer primary: 100V secondary: 6.3V/4A, 7-6.3-5-5-6.3-7V/5A × 2 W130 × H150 × D130 mm 8.1 kg (actual measurement, not including protrusions) There are scratches in places (Yosuke Kojima)
Accessories: none
The price has been drastically reduced! 2024/3/25 sale price 798,000 yen beautiful item! This current premain amplifier is the ultimate in Technics' digital technology. Equipped with a DAC, it is also possible to directly connect digital devices. What is noteworthy is record playback that makes full use of digital technology, and it is equipped with the Intelligent PHONO EQ, which is an innovative phono equalizer that can reproduce the original sound quality of the cartridge by correcting the cartridge's crosstalk and peak with DSP. The innovative and powerful power supply unit realizes majestic, energetic playback sound with high resolution and excellent driving ability for speakers. The exterior is beautiful with no conspicuous scratches (Shota Sasaki)
Maintenance information: 2024.3.24 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: rated output 150 W+150 W recommended load impedance 4 ohm to 16 ohm frequency characteristics PHONO (MM) 20 Hz to 20 kHz line 5 Hz to 80 kHz digital 5 Hz to 80 kHz power supply AC 100V 50/60 Hz W430 × H191 × D459 mm weight 22.8 kg
* Since there are many scratches such as scratches on the top plate and sides, and dents on the corners, it is inexpensive and is sold as is. Technics 3-way bookshelf speaker. A honeycomb flat unit is used to reproduce a unique sound field. In addition to the appearance described above, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 Operation confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex 6Ω 89dB crossover frequency 2kHz, 4.5kHz W223 x H378 x D207 mm 5.3 kg
※The subweight is missing, the rubber mat, and EP adapter are external products. Dust cover hingeless design. A classic record player that Technics is proud of. In addition to a simple design that is easy to use with a reasonable arrangement, stable operation and outstanding durability. This model is recommended both as an introductory model and as a secondary unit. There are many dullness, small scratches, and line marks on the dust cover and main body (Oikawa Tetsuji)
Maintenance information: 2024.3.24 Operation confirmed
Accessories: copy of instruction manual
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
Tara Lab's 2.0m pair of RCA cables are perfect cables that reproduce even delicate and subtle sounds with a quiet sound. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
Set of 2 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Ryo Mizusaki)
Accessories: No accessories
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
Set of 2 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. There are scratches, dullness, etc. on the exterior. There is no felt (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
※Inexpensive due to dullness, scratches, etc. Taok cast iron speaker stand This is a standard stand that tightens the bass and constructs an accurate sound image (Oikawa Tetsuji)
Accessories: spike, spike receiver
Main specifications: top plate W200×D240mm bottom plate W250×D300mm height 600mm 14kg