The price has been reduced! 2024/4/14 sales price 99,800 yen ※It is cheap because there are tar stains. The world's first Metamaterial-equipped speaker! Commonly known as MAT, it has a unique road structure, and is said to almost completely eliminate noise on the back of the TW, and it is an area where I feel surprised by its distortion reduction effect. A loudspeaker designed based on innovative sound technology. Please experience the clear tone of VOCAL's mid to high range. The exterior is dull all over, and there is dirt on the top plate. Serial LS50217926N11N2G/LS50218095N11N2G (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: 2-way bass reflex, 5.25-inch UNI-Q driver adopted, frequency characteristics 47Hz-45kHz, 8Ω, 85dB, W200 x H302 x 280.5 mm, 7.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/11 sales price 148,000 yen ※It is cheap because the condition is poor due to noticeable bumps and frayed saran nets. JBL 60th anniversary model. A tall boy who embodies a wide range of modern JBL sounds. It has a smooth, smooth tone, and is compatible with various genres without difficulty. Of course, you can also enjoy a sense of energy with a punch in the mid to low range. The exterior has blows, scratches, and fissures on Saran (Tamura Eiji)
Maintenance information: 2024.4.11 sweep test good
Accessories: saran net, spikes
Main specifications: 3 way 4 speakers 6Ω 90dB crossover frequency 2.5kHz, 8kHz W260 × H1,130 × D430 mm 35.6 kg
※It has a cigarette smell, so it's cheap. XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). The exterior has dirt and paint bald spots (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
Good condition with original box! OTG cable compatible with portable devices equipped with Lightning terminals. Can be used with products equipped with USB Type-C. By using a mesh sheath that is resistant to compression and twisting, and aluminum alloy is used for the plug, faster and more stable transmission is achieved. (FUJISAWA KOSHI)
Maintenance information: 2024.2.6 continuity confirmed
Accessories: original box
Main specifications: Lightning-USB TypeC total length 138mm cable length 80mm (excluding plug)
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT2411 (Fujisawa Yukishi)
Maintenance information: 2024.4.8 Maintained (meter and display lamp replacement (there is slight unevenness in characters due to deterioration of the light guide plate, but this is the current situation) Electrolytic capacitor, rotary SW replacement. Apply heat-resistant tape. Solder correction. Clean card edge contacts, switches, and volumes. Possible panel peeling correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT1245 (Fujisawa Yukishi)
Maintenance Information: 2024.4.8 Maintained (Electrolytic Capacitor Replaced. Replace the meter and display lamp. Apply heat-resistant tape Urethane sheet deterioration replacement. Clean switches and volumes. Card edge contact cleaning. Solder correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
※It is inexpensive because it has a cigarette smell, dirt, and deposits. Premium power amplifier/speaker selector. It uses a silver-plated contact mechanical switch to convey the original sound quality as it is. As a speaker selector, you can switch and select up to 3 pairs of speakers from one power amplifier output. Alternatively, as an amplifier selector, you can switch and select up to 3 power amplifier outputs for a pair of speakers. There are scratches, adhesions, and dirt on the exterior (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 3 inputs/1 output system, or 1 input/3 output systems, continuous passing power 250W (8Ω), W250 x D142 x H64 mm, weight 2.4 kg
※Since it is cheap, it will be handed over as is. 1 bottle only 25cm full range speaker made by RCA in the USA. The Alnico magnet responds well and the sound is easy to remove. There are repair marks on the edge (Tamura Eiji)
Maintenance information: 2024.3.22 sweep test good
Accessories: No accessories
Key Specifications: Unit Diameter 25cm 8Ω Fixed Edge
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
The price has been drastically reduced! 2024/4/13 sales price 348,000 yen ※ It is cheap because it is in poor condition such as deposits, scratches, tobacco smell, etc. A power amplifier that enables overwhelming spatial expression with a second-generation ultra-high speed switching power supply. First of all, I was surprised by the smooth, cored sound. The driving power is also excellent, and it has the ability to easily drive high-class speakers. The exterior is dull all over, and there are abrasions on the top plate and front (Yonejima Satoshi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: connection cord, power cable
Main specifications: 150W+150W (8Ω) input/unbalance (RCA) 1 system/balanced (XLR) 1 system SP terminal/1 system main unit W445 x H97 x D335 mm power supply unit W445 x H97 x D319 mm body 13.5 kg power supply 13.7 kg
Maintained! It is a model designed by US Marantz and manufactured in Japan. It develops an American sound with a dry air feel and strong push. The design is also a vintage control amplifier with a taste unique to the 70s. Externally, there are scratches and threads on the cabinet. *Some RCA terminals and inlets have been changed. Serial 7237 (Tamura Eiji)
Maintenance Information: 2024.4.13 Maintained (Mode selector stopper mechanism fixed. Electrolytic capacitors and film capacitors have been replaced. The speaker terminal (red and black type) has been processed and replaced. The end of RCA TAPE was replaced due to discoloration. Each input/output operation was checked.)
Accessories: power cable
Main specifications: Line input 5 systems, phono (MM), 2 systems, pre-out, 1 system, W391 x H146 x D222 mm, 7.3 kg
The price has been reduced! 2024/3/31 sales price 448,000 yen Maintained! It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant tonal feel is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. ※The hood is not included. Paint deterioration and rust can be seen on the exterior. Serial 8-6421 (Fujisawa Yukishi)
Maintenance information: 2024.3.31 Maintained (BIAS switching noise reduction measures → strengthened contact points for each disassembly part and cleaning and repair. Electrolytic capacitor 20 μF x 2 deterioration replacement. Replace 2 25 μF electrolytic capacitors due to deterioration. Block capacitor 60 μF deterioration replacement. BIAS/AC BAL. RECONDITIONED Vacuum tube socket and RCA jack caulking repair*Other operation checks have been performed (measured at 32 to 45 W SP: 8 Ω with rated output AC 100 to 117 V)
Accessories: No accessories
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
Micro stroboscope It comes with an overhang gauge, so it's convenient to have one. There are small scratches and dents on the exterior (Yonejima Satoshi)
Accessories: No accessories
Maintained on 2015.6.11. The graininess of the sound has been clarified, and the smoothness of the connection has also been improved. It is a crossover 1200 Hz network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has paint peeling and stains. Serial 9858/9958 (Miura Kimiya)
Maintenance Information: 2015.6.11 Maintained (terminal polishing, cleaning, insulation bush mounting screw replacement. ATT cleaning. Input/output waveform and balance check, sound output check. (Frequency characteristic measurement check)
Accessories: no accessories
Key Specifications: Crossover 1200Hz 8Ω 3-Position Switch with Level Control
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 79,800 yen Hi-Fi Hall first arrival! A compact and elegant DALI tall boy speaker with sharp low frequencies and clear midrange, and an airy treble range. The exterior has a scratch on the stand, a scratch on the side of the main unit, and a small scratch on the top plate. Serial 6255811 (Sato Wataru)
Maintenance information: 2024.4.2 sweep test good
Accessories: instruction manual, spike, saran net
Main Specifications: Frequency Characteristics: 39~26kHz 88dB Impedance 4Ω Tweeter 29mm Soft Dome Midrange/Woofer 130mm/SMC Wood Fiber Cone Driver ✕ 2 Dimensions W162 ✕ D283 ✕ H830mm Weight 10.8 kg
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Yonejima Satoshi)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
※It has a cigarette smell, so it's cheap. Yamaha commercial power amplifier. This is an easy rim-sized Yamaha commercial amplifier. The overall output is flat with elegant sound quality. There are dirt and scratches on the exterior. Serial 11505 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) left and right independent variable volume S/N ratio 110dB W480 x H94 x D338 mm
Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: diameter 35 mm x 3 mm (thickness)
※It is inexpensive because the condition is poor due to scratches, threads, and partial sheath deformation. Off sale power cable, 1.0 m, has an unprocessed end that combines performance and safety at an astonishing level. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: No accessories
※Since it is a commercial device, it will be handed over as is. It's a very powerful sound unique to professional machines, and it pushes the sound forward and forward. Recommended for jazz and rock fans with large woofers. The exterior has scratches, bumps, etc. Serial JP01026 (Tamura Eiji)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: 240W+240W (8Ω) 480W (16Ω MONO) with peak output meter W480 × D413 × H183 mm 20.5 kg
Maintained by Denon! This is DENON's mid-range model, and is a staple machine with an excellent sense of stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There are small scratches on the exterior. Serial 8061507480 (Tamura Eiji)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
※It has a cigarette smell, so it's cheap. Class D power amplifier compatible with DSD 11.2 MHz and PCM384 kHz/32 bit inputs. When reproducing a digital source, all processing from input to output can be performed in the digital domain. It is also equipped with a USB-DAC function and Bluetooth function, so you can enjoy music with high sound quality from a PC to a smartphone. As for the exterior, there are some square brackets. Serial AXD36190304432 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) speaker load 4-16Ω analog audio input terminal/unbalanced input × 1 digital audio input terminal/USB-B input × 1 coaxial digital input × 1 optical digital input × 2 W200 × H86 × D258 mm 2.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/28 sales price 59,800 yen ※The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it will remain as it is)
Accessories: No accessories
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2022/5/18 sales price 2,000 yen When used between an S-terminal AV noise filter device and a display, unnecessary noise is removed without deteriorating the amount of information or high frequency characteristics of the video signal at all, and the video signal is organized. The exterior is dull and dirty, and there are floating marks on the label. (TAMURA Eiji)
Maintenance Information: 2022.5.18 Continuity Confirmed
Accessories: There are no accessories
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A German stereo power amplifier with resolution and expressiveness not typical of commercial use. It is proud of its exhilarating sound and outstanding driving power that comes out quickly. The exterior has scratches and paint bald spots. Serial 2172380UGD01107 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 85W+85W (8Ω) 150W+150W (4Ω) W483 x H88 x D270 mm 11.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 217380XCK00185 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 2172380XCK00186 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 278,000 yen The lively sound has been revived through careful maintenance utilizing original capacitors. JBL's rare 36cm coaxial 2-way unit LE14C is mounted on the S-99 Athena enclosure made by Utopia Equipment. The high frequencies are also connected to a cone-shaped unit, and you can enjoy a variety of music sources with smooth, natural sound. There are repair marks on the top plate and right corner. Serial 98300, 98311 (Fujisawa Yukishi)
Maintenance information: 2023.4.18 maintained (exterior maintenance (exterior cleaning/touch repair, top plate polishing/oil finish, lattice back fabric repair), unit maintenance (low frequency side: edge replacement, damper replacement, cone paper repair/coating, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning, high range side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning), Network maintenance (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~42 khz) was performed, and the original capacitor was continued to be used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf type unit 35.5 cm coaxial 2-way (LE14C) network LX2-1 crossover 2,000 Hz impedance 8 ohms W450 x H610 x D346 mm
The price has been drastically reduced! 2024/4/14 sales price 198,000 yen This model took the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
Comes with original box A machined aluminum alloy separate structure and parallel wiring are realized at this price. The SAA-6SZ MK2 uses the latest independent wiring “super separate” and spike legs, and the center outlet uses a rhodium-plated outlet. Highly recommended for those who prefer vivid resolution. Serial A061411MR (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: original box
Main specifications: rhodium outlet x 1, BRYANT outlet x 2 W400 x H70 x D43 mm 2.5 kg
Audiocraft brass disc stabilizer. Stable playback is possible with a tight weight. Comes with a stroboscope for convenience. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: diameter 79 mm x height 20 mm weight 730 g
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji)
Maintenance information: 2024.3.6 continuity confirmed
Accessories: No accessories
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
Internal and external maintenance completed in April 2023! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound. There are line scratches and some chips on the exterior. Serial 58110513, 58110531 (Yonejima Satoshi)
Maintenance Information: 2023.4.1 Maintained (enclosure polishing, oil/wax painting. baffle paint. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement. (Corn paper coating) Unit detachable)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. Kanchireya is slightly to the left. Serial 21536 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Comes with original box! An A-shell elliptical needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 924201 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg